16
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
17
General UO Chat / Best luck suit out there?
« on: November 23, 2011, 05:55:41 PM »
Alright, who is rocking the best luck suit out there or knows the best luck pieces out there.
ic luck sandles 80
luck mempo 300 luck
ic luck sandles 80
luck mempo 300 luck
18
General UO Chat / bought a 30 day gametime code from uocodes site and it did not auto apply
« on: October 15, 2011, 03:17:02 PM »
So I bought a 30 day gametime code from Uogametime codes, the one linked to off the herald site and it still has nto applied nor have i recieved an email about the purchase. i know i do not ge the code but i shoudl get a purchase email. it did charge my CC for the purchase.
Any one else experience this or know who to call to push it along. I have always had instant results with this site in the past.
Any one else experience this or know who to call to push it along. I have always had instant results with this site in the past.
19
General UO Chat / What is the best way to put together a garg mage suit
« on: September 17, 2011, 08:08:28 AM »
man those necklaces and and earrings are awful!
I am looking for the best way to piece together a gar mage suit without imbuing much if any resist. and examples out there?
I am looking for the best way to piece together a gar mage suit without imbuing much if any resist. and examples out there?
20
General UO Chat / Anyone know anything about the fishing quest changes?
« on: July 05, 2011, 11:26:49 AM »
I saw something about upcoming changes but it was vague on what the changes were and when they were taking place.
Anyone hear about them or know about them?
new items? change in point system to get rewards etc
Anyone hear about them or know about them?
new items? change in point system to get rewards etc
21
Scripting Chat / Has anyone mastered the upcoming changes to bandages based on dex
« on: June 29, 2011, 11:28:01 AM »
It looks like the timer has changed to an 8 second max compared to the old 11 second max. Did they also change how often you slip in applying them and if that changes the length of time it adds to the process? I bet Alpha has written a snip-it for this...hehe.
I have the old dex based timers like this:
if #dex >= 140
set %bandagetimer_interval 5
if #dex <= 139
set %bandagetimer_interval 6
if #dex <= 119
set %bandagetimer_interval 7
if #dex <= 99
set %bandagetimer_interval 8
if #dex <= 79
set %bandagetimer_interval 9
if #dex <= 59
set %bandagetimer_interval 11
I have the old dex based timers like this:
if #dex >= 140
set %bandagetimer_interval 5
if #dex <= 139
set %bandagetimer_interval 6
if #dex <= 119
set %bandagetimer_interval 7
if #dex <= 99
set %bandagetimer_interval 8
if #dex <= 79
set %bandagetimer_interval 9
if #dex <= 59
set %bandagetimer_interval 11
22
Scripting Chat / has anyone found a way to deal with the difference in how charstatus shows poiso
« on: June 29, 2011, 10:23:36 AM »
Gargoyles do not show ia difference for being poisoned because their flying state is the same as their poisoned state... both CB. Too add to that as you are clicking to fly you go from character status...
B standing to...
BA flying sequence...
CBA more flying sequence...
CB final flying character status.
Now while in CB (flying) status you have c in character status showing poisoned even if you are not poisoned. If you drink a poison pot, you becme poisoned and still show CB. No change!
The only thing I can think of is buffbar or pixel scanning. Any other ideas besides journal scans?
B standing to...
BA flying sequence...
CBA more flying sequence...
CB final flying character status.
Now while in CB (flying) status you have c in character status showing poisoned even if you are not poisoned. If you drink a poison pot, you becme poisoned and still show CB. No change!
The only thing I can think of is buffbar or pixel scanning. Any other ideas besides journal scans?
23
Scripting Chat / Script Idea/Request from a user that would benefit the site - suit builder
« on: June 11, 2011, 07:41:37 AM »
Basically, it is a suit assistant that calculates your suit as you build it and has a button to recalculate over and over as you alter/imbue pieces. it would display all the stats etc. more detail below. if anyone is interested, this is a nice one.
Request:What im looking for is this:
If any of your nice coders out there got some time to make a script that would assist in imbuing armor, it would be nice. Ive been looking and searching - but cannot find any.
Closest I get is CEO's Suit builder - but for to update the imbued parts I need to restart that script, and it dont count some arties and garg armor.
What I am looking for is something like this:
Script starts, ask you to target one bag. It lists all parts in a menu with resist values in each area (like CEO's). And total resist at bottom.
When you imbue a part, it updates the part - and total resists (or you got a refresh button).
This would be a great help imbuing armor sets, as it will do the calculating that many of us does with pen and paper. Still requires user to keep track of imbuing properties per part. Unless its possible to make a optional count of changes made to each part.
Im sorry to bother you with this issue, but I hope I sent to right end for to get a guidence of either post somewhere or contact anyone that mayhaps could help develop such a thing.
Thank you for supporting such a great site.
Request:What im looking for is this:
If any of your nice coders out there got some time to make a script that would assist in imbuing armor, it would be nice. Ive been looking and searching - but cannot find any.
Closest I get is CEO's Suit builder - but for to update the imbued parts I need to restart that script, and it dont count some arties and garg armor.
What I am looking for is something like this:
Script starts, ask you to target one bag. It lists all parts in a menu with resist values in each area (like CEO's). And total resist at bottom.
When you imbue a part, it updates the part - and total resists (or you got a refresh button).
This would be a great help imbuing armor sets, as it will do the calculating that many of us does with pen and paper. Still requires user to keep track of imbuing properties per part. Unless its possible to make a optional count of changes made to each part.
Im sorry to bother you with this issue, but I hope I sent to right end for to get a guidence of either post somewhere or contact anyone that mayhaps could help develop such a thing.
Thank you for supporting such a great site.
24
General UO Chat / Taming penalties
« on: May 30, 2011, 08:04:47 PM »
Okay...
I have heard yes and no to all of the following items below in regards to this question:
Are there negative effects on the animal you tame if you...
disco it?
peace it?
para it?
beat it up?
It is an even split out there amoung folks that tame. I know for a fact that EA put in a penalty for para taming at one point but never heard of them removing it. Peeps sware that there is not penalty nowadays. I never heard of a penalty being assessed to tames if you beat them down first but folks sware it exists.
Does anyone actually know how it works for sure in the four areas above?
I have heard yes and no to all of the following items below in regards to this question:
Are there negative effects on the animal you tame if you...
disco it?
peace it?
para it?
beat it up?
It is an even split out there amoung folks that tame. I know for a fact that EA put in a penalty for para taming at one point but never heard of them removing it. Peeps sware that there is not penalty nowadays. I never heard of a penalty being assessed to tames if you beat them down first but folks sware it exists.
Does anyone actually know how it works for sure in the four areas above?
25
_C2_ Script Library / C2's Dungeon and Shore Fisherman Public Version
« on: May 22, 2011, 03:15:39 PM »
C2's Dungeon and Shore Fisherman Public 1.1c
This script has been a private script of mine for some time now. I actually made some tweaks to make it a easier set-up for public by not hard coding locations. I feel like it is time to share it just like I shared the crabber. There is a test script to play that will respond with the word valid or invalid. Use this script to decide where to mark runes.
It will do both shore and dungeon fishing for you. The tile scanning starts at one tile away and moves away up to four tiles away as it scans 360 degrees around you. It will only fish one location out per rune. The public version does not do multiple locations at each rune.
It has an auto defend mode through magery but I cannot guarentee that it has all the monster ids needed. It has a lot! If you find one that is needed, please post the name of the monster and the id that it has. Note that some monsters have multiple ids so check several in the spawn area. That is feedback would be appreciated. Auto defend mode will use super slayer books. Do not carry any minor slayer books (ie air, fire & snow). It does not and will not loot corpses. I will not be adding that for the small amounts of gold it could scrounge up.
This script allows you to set the big fish size that you wish to keep and should handle any big fish that fall to the ground. I have really only set it up to handle the fish that I have come into contact with the most during past fishing sessions so the most common big fish are in there (Koi, fire, regular big, summer dragonfish, yellowtail...etc)
I use an arming macro that places the item on the paperdoll. It may or may not work for gargoyles. I do not have a lot of time to fuss with that ATM. If you have a gargoyle fisherman, I am sorry that this script may not work for you with slayerbooks. I have not tested that out yet. If this is the case, the alternative is to not put any superslayer books in your backpack.
I hope that this makes your life easier as it has mine. The set-up and directions are at the top of the script! Please read the directions and suggestions carefully. A common misunderstanding is how to use banking mode. Banking mode requires you to get a third book with 16 banking runes (Only bank runes) and to name it banking. Do not name fishing or dump books banking; these books are not for bank runes. If you choose bank mode, it will ignore secure rune numbers. Banking uses random select to select runes 1-16 out of the banking book to help reduce your impact on bank visits
Q&A:
Q: Will you make this use fishing baits?
A: No, this is intended to farm fish to complete quests.
Q: Will you make it so I can use pets with it?
A: No
Q: Will you be adding fighting skills instead of magery?
A: No
This script has been a private script of mine for some time now. I actually made some tweaks to make it a easier set-up for public by not hard coding locations. I feel like it is time to share it just like I shared the crabber. There is a test script to play that will respond with the word valid or invalid. Use this script to decide where to mark runes.
It will do both shore and dungeon fishing for you. The tile scanning starts at one tile away and moves away up to four tiles away as it scans 360 degrees around you. It will only fish one location out per rune. The public version does not do multiple locations at each rune.
It has an auto defend mode through magery but I cannot guarentee that it has all the monster ids needed. It has a lot! If you find one that is needed, please post the name of the monster and the id that it has. Note that some monsters have multiple ids so check several in the spawn area. That is feedback would be appreciated. Auto defend mode will use super slayer books. Do not carry any minor slayer books (ie air, fire & snow). It does not and will not loot corpses. I will not be adding that for the small amounts of gold it could scrounge up.
This script allows you to set the big fish size that you wish to keep and should handle any big fish that fall to the ground. I have really only set it up to handle the fish that I have come into contact with the most during past fishing sessions so the most common big fish are in there (Koi, fire, regular big, summer dragonfish, yellowtail...etc)
I use an arming macro that places the item on the paperdoll. It may or may not work for gargoyles. I do not have a lot of time to fuss with that ATM. If you have a gargoyle fisherman, I am sorry that this script may not work for you with slayerbooks. I have not tested that out yet. If this is the case, the alternative is to not put any superslayer books in your backpack.
I hope that this makes your life easier as it has mine. The set-up and directions are at the top of the script! Please read the directions and suggestions carefully. A common misunderstanding is how to use banking mode. Banking mode requires you to get a third book with 16 banking runes (Only bank runes) and to name it banking. Do not name fishing or dump books banking; these books are not for bank runes. If you choose bank mode, it will ignore secure rune numbers. Banking uses random select to select runes 1-16 out of the banking book to help reduce your impact on bank visits
Q&A:
Q: Will you make this use fishing baits?
A: No, this is intended to farm fish to complete quests.
Q: Will you make it so I can use pets with it?
A: No
Q: Will you be adding fighting skills instead of magery?
A: No
26
Off Topic / how to contact ea support to retrieve a forgotten pass linked to bad email
« on: April 20, 2011, 07:38:20 PM »
so, i may not be able to get this acct back but i plain old forgot the password and have no idea if i put my real info in user details. i can probabbly provide my credit card that i used back in the day and get it back but does anyone know the correct ea # to call for this stuff.
27
Scripting Chat / fixing my missing ship
« on: April 14, 2011, 02:42:20 PM »
so I have read and seen a lot of info on the fishing quest bug that made it possible for mongers not to see your ship even when it was in the correct place. I was so happy that i never had to deal with the bug but today after weeks of not doing a single quest, i log in and sail to the monger and he cannot see my boat. ARG!!!
I am looking for someone that actually knows what to do without throwing three orders overboard and losing my rep points. I tossed one before and took a significant hit for a while. I do not play enough to be able to absorb this loss comforrtably. I also read a lot over at stratics and determined you never know who is an idoit over there and who actually knows their stuff.
can someone that really knows, no guessing and i thinks, tell me how to restore my boat so i do not have to cancel a bunch of orders and lose all my rep.
I have heard to place another boat and then remove it and they see your boat. I have heard dry dock. I have even heard by placing a second legacy boat that they lost all their rep.
Seroiusly, does anyone actually know?
I am looking for someone that actually knows what to do without throwing three orders overboard and losing my rep points. I tossed one before and took a significant hit for a while. I do not play enough to be able to absorb this loss comforrtably. I also read a lot over at stratics and determined you never know who is an idoit over there and who actually knows their stuff.
can someone that really knows, no guessing and i thinks, tell me how to restore my boat so i do not have to cancel a bunch of orders and lose all my rep.
I have heard to place another boat and then remove it and they see your boat. I have heard dry dock. I have even heard by placing a second legacy boat that they lost all their rep.
Seroiusly, does anyone actually know?
28
General UO Chat / commodity deeds not displaying correctly
« on: April 01, 2011, 05:30:49 AM »
I just noticed this friday morning, April 1st (I'm not April Fools joking ya)
that when i deed any crab or fish, i get the wrong name or a generic name.
I have not taken the last patch but it was not forced and I would be very surprised if it was actually impacting the names on deeds like this although it certainly could.
can a few folks try deeding up different stuff and seeing if it is just me, or a not taken patch thing yet, or everyone suffering.
This has nothing to do with easy uo. deeds done by hand in a non lag situation
that when i deed any crab or fish, i get the wrong name or a generic name.
I have not taken the last patch but it was not forced and I would be very surprised if it was actually impacting the names on deeds like this although it certainly could.
can a few folks try deeding up different stuff and seeing if it is just me, or a not taken patch thing yet, or everyone suffering.
This has nothing to do with easy uo. deeds done by hand in a non lag situation
29
Scripting Chat / Fishing out an area
« on: February 04, 2011, 04:25:45 PM »
So I have a script that I use for fishing and I am looking to make it super easy for users but finding that i am having trouble figuring out how to make it fish out every possible spot without gettign a million fish are not biting here messages. Currently, you hard code where to cast and that works great. i have spots where you fish out 3-4 spots and it hits them and moves on perfectly. No boats.. land only.
Thinking ahead to a public thoughtless version because let's face it hard coding spots is going to be a nightmare for folks that are not comfortable with easy uo is going to lead to a million PMs of i cannot figure it out will you make spots for me requests and a lot of how does this work questions desipite how solid a write-up is.
The tile scanning to make sure it is water is not an issue...
it is how do i get it to be smart about fishing multiple spots that do not overlap from the same location. I was thinking of doing what TM's fishing script does and fish or check each direction / diagonal in each direction but there will be marked locations where none of those auto find.
The easiest solution, which i do not care for, is to make it fish one spot and move on.
Any creative ideas?
Thinking ahead to a public thoughtless version because let's face it hard coding spots is going to be a nightmare for folks that are not comfortable with easy uo is going to lead to a million PMs of i cannot figure it out will you make spots for me requests and a lot of how does this work questions desipite how solid a write-up is.
The tile scanning to make sure it is water is not an issue...
it is how do i get it to be smart about fishing multiple spots that do not overlap from the same location. I was thinking of doing what TM's fishing script does and fish or check each direction / diagonal in each direction but there will be marked locations where none of those auto find.
The easiest solution, which i do not care for, is to make it fish one spot and move on.
Any creative ideas?