46
Script Debug / Re: Trick or treat starter
« on: October 22, 2020, 04:46:29 PM »
The smaller one. I THOUGHT I had deleted the other. My bad! Fixed now.
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
finditem HS_IS G_4 ;find trick or treat targets
if #findcnt = 0 ; Teleported or all targeted, go to next rune in book.
{
ignoreitem reset ; clear queue
set %RuneLocStart %RuneLocStart + 1 ; start at first rune? I think this is how?
if %RuneLocStart > 16
set %RuneLocStart 1
set %RuneLocEnd %RuneLocStart + 1 ;since runelocend is always one greater, should it reset to 1 first?
if %RuneLocEnd > 16
set%RuneLocEnd 1
gosub TM_TravelFromNamedRunebook RE %RuneLocStart %RuneLocEnd %BookName
}
set %RuneLocStart %RuneLocStart + 2
Yet, it worked flawlessly except for not hitting all the runes.set %RuneLocStart %RuneLocStart + 1
I would always get stuck on the third rune and not change to the fourth.Display ok Target your recall rune or book
set #targcurs 1
while #targcurs = 1
wait 0
set %rune #ltargetid
wait 5
;----------
Display ok Target your First Animal.
set #targcurs 1
while #targcurs = 1
wait 0
set %heal1 #ltargetid
wait 5
;-----------
mainloop:
gosub TM_AdvJournalSync TRICK 100
gosub trickortreat1
wait 60s
return
;----------
Sub trickortreat1
set #ltargetid %heal1
set #ltargetkind 1
msg $trick or treat
if #targcurs = 0
{
repeat
}
target
Event macro 22 0
gosub trickcheck
return
;-----------
Sub trickcheck
gosub TM_AdvJournalScan TRICK VALID_Advance teleports
If #result = #true
{
msg $trick detected
}
return
;=================================================================
; Script Name: TrailMyx's Advanced Journal Scanner
; Author: TrailMyx gosub TM_AdvJournalScan heal VALID_ADVANCE
; Version: 1.2
; Shard OSI / FS: OSI / FS?
; Revision Date: 10/20/2007
; Purpose:
; Use these subs to quickly find text in your #journal entries. These subs
; use #jindex for flawless journal scanning and is much more reliable than using
; standard indexing of #journal and #SYSMSG.
;
; Now it is possible to manage separate journals based on unrelated text. It's now possible
; to monitor spellcasting, bandaging, stealing, or anything else without a TM_AdvJournalSync
; potentially removing text needed for another UO funciton.
;
; New is the ability to either gosub or call these functions without the need to change the
; header! When calling, a limit of 10 arguments is allowed, but more can be added by editing the
; call interface section.
;
; Examples:
; gosub TM_AdvJournalSync speech 100 ; sync "speech" journal space, set #LPC to 100 from default of 1000
; gosub TM_AdvJournalScan speech VALID Find_this_text and_find_this_too ; will not advance copy of #jindex
; gosub TM_AdvJournalScan heal VALID_ADVANCE you_heal_what that_patient_is_not ; advances pointer after scan
; gosub TM_AdvJournalScan spellcast NONE fizzle ; no spam checking and doesn't advance #jindex copy automatically
;
; Subs included:
; TM_AdvJournalGetTrigger - retrieve the triggering string (#FALSE for no trigger)
; TM_AdvJournalSync - Must call this in initialzation
; TM_AdvJournalScan - see header for details....
;
; Release history:
; v1.0 - Initial release.
; v1.1 - debug code added, fixed small possibility to miss an incoming journal entry
;
; Requirements:
; Nothing special
;
; Credit:
; If you use these subs, please leave credit for me somewhere in your script header.
;=================================================================
;------------------------ Call interface -----------------------
;=================================================================
set !TM_FunctionCalled #FALSE
if %0 = 1
gosub %1
if %0 = 2
gosub %1 %2
if %0 = 3
gosub %1 %2 %3
if %0 = 4
gosub %1 %2 %3 %4
if %0 = 5
gosub %1 %2 %3 %4 %5
if %0 = 6
gosub %1 %2 %3 %4 %5 %6
if %0 = 7
gosub %1 %2 %3 %4 %5 %6 %7
if %0 = 8
gosub %1 %2 %3 %4 %5 %6 %7 %8
if %0 = 9
gosub %1 %2 %3 %4 %5 %6 %7 %8 %9
if %0 = 10
gosub %1 %2 %3 %4 %5 %6 %7 %8 %9 %10
if %0 = 11
gosub %1 %2 %3 %4 %5 %6 %7 %8 %9 %10 %11
if %0 > 11
{
display ok Too many arguments for "call", edit file.
stop
}
if !TM_FunctionCalled = #TRUE
exit
if %0 = N/A
display ok You may not run this script directly.
else
display ok Function " , %1 , " not found.
stop
;-------------------------------------------------------------------------------
sub TM_AdvJournalGetTrigger
namespace push
namespace local TM_AdvJS_ , %1
set #RESULT !trigger
namespace pop
set !TM_FunctionCalled #TRUE
return #RESULT
;-------------------------------------------------------------------------------
; %1 - Journal Name
; %2 - #LPC setting (optional)
; Brings !_jindex up to the most recent #journal entry
sub TM_AdvJournalSync
namespace push
namespace local TM_AdvJS_ , %1
set !_jindex #jindex + 1
if %0 > 1
set !lpc_set %2
namespace pop
set !TM_FunctionCalled #TRUE
return
;-------------------------------------------------------------------------------
; %1 - Journal Name
; %2 - NONE, ADVANCE , ( _VALID ) - advances jindex pointer, anything else
; %3, %4, %5, etc strings to match
; returns #TRUE for match, #FALSE for no match
; Will not advance !_jindex pointer to allow for scanning journal history for more than one search.
; Also searches for : , #SPC in journal entry to be sure someone isn't spamming the text
; About %2 arguments:
; NONE: defaults to basic journal scan (no SPAM checking, no #jindex pointer copy advancing)
; ADVANCE: no spam checking, advances #jindex copy
; VALID: invokes SPAM filtering, no advance of #jindex copy
; VALID_ADVANCE, VALIDADVANCE, ADVANCE_VALID, etc.: invokes SPAM filtering, advances of #jindex copy
sub TM_AdvJournalScan
namespace push
namespace local TM_AdvJS_ , %1
set !args %2
set !temp_lpc #LPC
if !lpc_set = N/A
set #LPC 1000
else
set #LPC !lpc_set
set !num_args %0
set !first_arg 3
set !sampled_jindex #JINDEX
if !_jindex = N/A
set !_jindex !sampled_jindex
if !charname = N/A
{
set !charname #CHARNAME
AdvJournalScan_loop1:
str pos !charname #SPC
if #STRRES <> 0
{
set !val #STRRES - 1
str left !charname !val
set !left #STRRES
set !val !val + 1
str del !charname 1 !val
set !charname !left , _ , #STRRES
goto AdvJournalScan_loop1
}
}
set !index !first_arg
repeat
set !temp_jindex !_jindex
set !text % . !index
while !temp_jindex <= !sampled_jindex
{
scanjournal !temp_jindex
str pos #JOURNAL !charname 1
set !namepos #STRRES
str count #JOURNAL !charname
set !namecnt #STRRES
str pos #JOURNAL :_ 1
set !smcpos #STRRES
str pos #JOURNAL !text 1
set !textpos #STRRES
if !textpos < !smcpos && !smcpos <> 0 || !smcpos = 1 || :_ notin #JOURNAL || VALID notin !args
set !pass #TRUE
else
set !pass #FALSE
if ( !text in #journal && ( ( !namepos = 1 && !namecnt <= 1 ) || !pass ) )
{
set !temp_jindex !temp_jindex + 1
if ADVANCE in !args
set !_jindex !temp_jindex
set !trigger !text
set #LPC !temp_lpc
namespace pop
set !TM_FunctionCalled #TRUE
return #TRUE
}
set !temp_jindex !temp_jindex + 1
}
set !index !index + 1
until !index - !first_arg > !num_args - !first_arg
set %10 !sampled_jindex - !_jindex
set %10 %1 , _ , %10 ; for debugging purposes
set #LPC !temp_lpc
set TM_AdvJournalGetTrigger #FALSE
namespace pop
set !TM_FunctionCalled #TRUE
return #FALSE
;-------------------------------------------------------------------------------
if #findrep = 2_3_4_5_6_7
ignoreitem #FINDID