Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - jenovauh

Pages: 1 2 [3] 4
31
Combat/Healing/Looting / Re: TrailMyx's Advanced CLAw FULL - The Ultimate Autolooter - Public Release!
« on: October 24, 2020, 11:07:31 AM »
Quote from: TrailMyx on October 23, 2020, 04:17:44 PM
Hmm, I can't seem to replicate either one of of your issues.  Which arrow are you clicking?  Are they the zoom arrows?

For the adding rules, are you talking about taking rules from the Rule entry and adding them to the Active list?  I think I see some odd behavior there.  Should be an easy fix.

Sorry for the last reply. I mean left and right arrow under Preview or History tab. The one that you can press to backward and forward to view item looted.

32
Combat/Healing/Looting / Re: TrailMyx's Advanced CLAw FULL - The Ultimate Autolooter - Public Release!
« on: October 19, 2020, 10:30:49 PM »
Yes it is running well and thank you so much for sharing such a good script. I am still learning and trying to understand how the script works.  :)

I realized some part of the looting interface is not working properly but it doesn't affect the looting process. Example like the left and right arrow doesn't do anything after you click once. You have to actually switch to another tab of the looting interface and switch back again then it will be able to work again. Also the adding of rule have to same issue after adding one rule and need to switch to another tab and switch back to add again. Not sure what's wrong and it is too advanced for me to troubleshoot.

33
Combat/Healing/Looting / Re: TrailMyx's Advanced CLAw FULL - The Ultimate Autolooter - Public Release!
« on: October 18, 2020, 07:27:12 AM »
Hi TrailMyx, i managed to fix my problem. Totally not sure how it happen and i couldn't replicate the issue again. At first, I did a reinstallation on UO and it did not work and later with an windows update, it finally work as per normal. Wondering what from windows OS is causing this problem. Anyway thank alot and it is the best looter ever.  ;D

34
Combat/Healing/Looting / Re: TrailMyx's Advanced CLAw FULL - The Ultimate Autolooter - Public Release!
« on: October 06, 2020, 09:45:36 PM »
Yes i am using the latest easyuo version 1.6.0.335. I tested many way and it i just weird that it doesnt look gold or loot for item in the rule. Loot everything just works fine. I will continue to try and see whats wrong. Thank you very much.

35
Combat/Healing/Looting / Re: TrailMyx's Advanced CLAw FULL - The Ultimate Autolooter - Public Release!
« on: October 05, 2020, 05:39:59 PM »
I was trying to figure out my problem reading almost all the history pages. I did not see anyone with looting gold issue.

I load the script and test loot. I basically put some amount of gold and some 50 pieces of random armours, weapons and items in a bag. Added as rule to look for item with sum of total resist >= 20.  Nothing was found and gold not looted.

To further test it, I enable loot everything. Went to kill some mobs, it open the bag and scan then looted everything except ring, bracelet and gold.

I tested with just one item like LRC 20 armour and some gold in a bag, then set rule to look for LRC >= 15. Again nothing was found at all and gold was not looted as well.

No other script is running at all. Turbo was disable. Testing is OSI Shard. Could not figure out what is the problem at all. Any advise here? Thanks a lot.

36
Questing / Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
« on: July 04, 2013, 09:59:42 PM »
Thanks for all the advises guys, I will see what is the best I write to counter this. Anyway I do not AFK running the script, so that player can not do anything about me but I think the other player who run the script might have problem lol. He is doing heartwood quest run but with like 4-6 accounts, the script seem to be difference from this one. Many time I saw all his runner just wait the the entrance cause it was blocked. Once I remove the blocked item, all the accounts run into the portal.

By the way anyone saw any script pattern as below before?

He will have a main account stationed at the quest NPC location ( maybe just scroll to the quest and turn in, cause I did not hear any sound  crafting any item), then about 3-5 accounts with character have a naming convention of "help XXX" ( all of those toon will recall to heartwood entrance and zone in, "running" on horse to the main account, then after sometime they will run to the trash bin without stopping and path to exit of quest wood, then it recall away and come back again.

37
Questing / Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
« on: July 04, 2013, 01:36:13 AM »
Quote from: Crisis on July 03, 2013, 04:13:20 PM
Quote from: The Ghost on July 03, 2013, 03:44:24 PM
Which shard is the gate block.   U can always recall before u start ur run.
Good idea, thats what I was doing before starting. I usually stay semi-attended on this script anyways since it has to run without being covered.

That fellow is too free to put stuff to block the gate before and after zoning, recall does not help anything as either you cannot enter or exit through the gate.

38
Questing / Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
« on: July 03, 2013, 01:41:21 AM »
Quote from: TrailMyx on July 02, 2013, 06:07:31 AM
Quote from: jenovauh on July 02, 2013, 03:43:50 AM
Hi TrailMyx, can I know is it possible to add sub to check the entrance/exit of Heartwood before zoning in and out? And pick up the wooden container that block the entrance/exit. Thanks again for the trouble.

Sure, anything is possible.  I remember discussion somewhere in this thread about someone wanting to remove bagballs placed around the heartwood portal.

Yes i read about it, only discussion. It was not release and also need some high level scripting to edit the rail to make it work. I am pretty sure I cannot make it lol.

39
Questing / Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
« on: July 02, 2013, 03:43:50 AM »
Quote from: TrailMyx on June 29, 2013, 08:41:20 PM
I was going to recommend that, so I'm glad that actually worked.  Anyhow, you'll need the magic number for that quest and adjust the click locations for the craftitem sub.  I'm traveling at the moment so I can't get more specific from my tablet.

Hi TrailMyx, can I know is it possible to add sub to check the entrance/exit of Heartwood before zoning in and out? And pick up the wooden container that block the entrance/exit. Thanks again for the trouble.

40
Questing / Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
« on: July 02, 2013, 03:38:44 AM »
I found out that trial account are able to only do the quest once and cannot get the same quest after lol.

41
Questing / Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
« on: June 29, 2013, 09:51:13 PM »
Quote from: TrailMyx on June 29, 2013, 08:41:20 PM
I was going to recommend that, so I'm glad that actually worked.  Anyhow, you'll need the magic number for that quest and adjust the click locations for the craftitem sub.  I'm traveling at the moment so I can't get more specific from my tablet.

Sure no problem TrailMyx and enjoy your trip. I will try to figure out and maybe when you are free then give me some advise. Thanks a lot.

42
Questing / Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
« on: June 29, 2013, 08:10:47 PM »
Quote from: TrailMyx on June 26, 2013, 08:20:30 AM
They use Kals OCR.  We don't.  I just never had a computer that exhibited this issue to debug in any way.  If I ever run across something that's wonky, I'd play with it.

TrailMyx, I finally got it to work on the same pc but I run UO in vmware lol. Thanks for all the trouble. :)

Anyway if I wanna change the script to make xbow, can I know which part of the script do I need to edit? Reason I am doing so it is because I am using a trial account and they do not have Arch support and A simple bow available.

43
Questing / Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
« on: June 26, 2013, 06:14:18 PM »

44
Questing / Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
« on: June 26, 2013, 08:18:05 AM »
Quote from: TrailMyx on June 26, 2013, 07:43:14 AM
Quote from: jenovauh on June 26, 2013, 05:21:01 AM
Hi TrailMyx, to my surprise the #RESULT for all the quest that are being toggled are 2700. I do not know what I can do now. Any idea how to fix this?

The only time we saw that was when someone was having video card driver issues.  I'm pretty sure you're SOL if that's the case.

Still dont understand why this will happen, I am using SOS master and s7BodFiller, i believe they are both using OCR also. If my graphic card driver is having issue. They should not work as well right? Confused.

45
Questing / Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
« on: June 26, 2013, 05:21:01 AM »
Quote from: TrailMyx on June 24, 2013, 04:55:30 AM
That's exactly right.  If the resulting numbers are different, then for some reason your rig is computing the magic number differently.  Just replace either of these numbers with your result and give it a go.

Hi TrailMyx, to my surprise the #RESULT for all the quest that are being toggled are 2700. I do not know what I can do now. Any idea how to fix this?

Pages: 1 2 [3] 4