TrailMyx's WarpSpeed Logs to Boards converter

[j.kitty]

I've tried adding several different spell channeling axes to the script where your instructions say to and when I hit play it doesn't do anything but stop.  Any ideas?

[Toptwo]

I've tried adding several different spell channeling axes to the script where your instructions say to and when I hit play it doesn't do anything but stop.  Any ideas?

  If you have the ID for your axe type try this...on TM's line

finditem BSF_ZRF_UOH C_ , #CHARID 

If your axe type was say FSF make the line look like this...

finditem BSF_ZRF_UOH_FSF C_ , #CHARID

Add the axe type in Before the C_

Give that a try

[j.kitty]

Not sure what I did to finally get the script to work (it was late and I was over tired) but work it did! OMG it was unbelievable how fast it went through 200k logs.  *HUGS TM* thankyouthankyouthankyou... I was prepared to let it run while I was sleeping but it was finished in under a minute.

[Scrripty]

Yea, I just fell in love with TM too.  I forgot all about the leather trick.  Thanks TM.

[TrailMyx]

Check out the Site Rules.  Your questions will be answered.

[kenshin87]

what is this leather trick you speak about?

[TrailMyx]

It's the same method of cutting the leather en-mass.  You don't even need EUO to do it.  If you look at the code, you'll see the process.

[mTr]

I think this script does'nt work now on the new client versions, because you no longer cant make boards with the axe, you must use the carpenter tools (Nails). Is there another version that might work with the new publish ? Or some script that integrates the log2board while lumberjacking ?

BTW Good work, didnt know that trick and seems it was so fast (i readed minutes :>) but no luck at running it like you see.

[TrailMyx]

Remember this method won't work on RunUO shards and only works on OSI.

[mTr]

Ahh! you'r right! lost that part hehehe. Sorry my bad :>

Edit: BTW i found a script on easyuo web from endings that works on RunUO, and it does her job but its a bit slow!  Just wanted to share with the RunUO mates from SUO.

[Pearls]

Man that was hilarious... script ran for like 10 secs and turned all my wood in boards

[TrailMyx]

Man that was hilarious... script ran for like 10 secs and turned all my wood in boards

Heh, I don't mess around when I name something "Warpspeed!"

"Engage!"
  -- Captain Picard.

[gruntman]

I recently came back to uo and this script was one of my favs. Any chance to get it fixed? It only cuts my regular wood. I dont have any carp on toon but I dont need it to cut wood. I have gm lumberjacking.

Thank you

[TrailMyx]

Something is amiss on your end.  I just ran through all different types of wood with my lumberjacker.  I have 100.0 lumberjacking and 100.0 carpentry and it works fine.  I also stoned carpentry and tested again with just lumberjacking and that also works fine.  I'm running 7.0.10.3 without the high seas expansion and EUO 181.  I'm unsure what's up on your end.  You'll have to do a bit of debugging on your own.

It's refreshing to see this method still works. 

[MeWonUo]

Goodness!!  I had no idea that you could hack logs so fast!! 

I was thinking this would pull a few hundred at a time to chop them.  Planned on letting it run while I went to make dinner.. Haha!!

Thank you TM!!