Please read the Site Rules to become familiar with the download requirements of this scriptAnd here's the Q/A:
Q:
My beetle keeps lagging out, what's up with that?
A:
Check to be sure you don't have "run always" selected in the client. Also, keep your hands off the mouse and avoid using the computer when the script is railing into and out of Heartwood.
---------------------
Q:
The quest I'm doing is never automatically selected; it just keeps looping.
A:
Be sure you are playing in 32bit video mode and that you are NOT playing in full-screen mode.
Also, try making sure your mouse is on the screen and physically "click" the grey area of the quest selection gump. (Thanks to Ultima for that tidbit)
Also, you must be playing in WINDOWED mode. If you are playing in FULLSCREEN mode, this probably won't work.
---------------------
Q:
Why does this script take so long to select the quest even after it's on the screen? Also seems to be slow when it's selecting the "Toggle quest item"
A:
Chances are real good that you are:
- 1) Playing on an older computer
- 2) Have a system with lots of programs running
- 3) Trying to run on a laptop - be sure you are using your laptop plugged in and not running on batteries. Also be sure that you are running in 100% utilization mode. Most laptops throttle-back the CPU frequency. Override this at your own risk since you can melt your laptop!
---------------------
Q:
How can I modify this script to do other quests in Heartwood?
A:
It's pretty easy. In the setup section, you need to change the appropriate item types, resource types, and tool types. Also, you need to let the OCR know that you want to stop at a particular quest by changing the "magic number" Here's a few numbers to get you started:
set %QUEST_Ingenious_Archery_Part_I 10013928
set %QUEST_Ingenious_Archery_Part_II 11388140
set %QUEST_Ingenious_Archery_Part_III 12210240
set %QUEST_Lethal_Darts 5362724
It's pretty simple to have the quester let you know what these magic numbers are, but I'll let you figure it out.
---------------------
Q:
This quester does not run on my particular freeshard.
A:
Nope, probably not.
We do not officially support anything but OSI. If you are willing to take some active debugging to help us figure out what might be the problem, then you might receive some help. However, if you say "this script doesn't work on my shard, come fix it"... well, you won't get much help.
---------------------
Q:
What's so special about Freeshards and why the quester won't run?
A:
Freeshards have no "official" release for Heartwood or any other content related to the Mondain's Legacy publish. RunUO in particular.
---------------------
Q:
How do I make the script use another wood other than normal?
A:
Locate the line:
set %reshue 1 ; 1-wood, 2-oak, 3-ash, 4-yew, 5-hearwood, 6-bloodwood, 7-frostwood
located in either your fletching setup or your carpentry setup and change the value of %reshue accordingly.
---------------------
Q:
Why isn't anyone answering my questions?
A:
We opened up the ability to download the script, however we are going to be selective about who gets their questions answered. For those people that have participated in the site, we will be very helpful. If you have only posted your introductory posting, followed by pleas for help, you will not receive much response.