Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Alpha

Pages: [1] 2 3 ... 38
1
Hardware Design / Re: networking issues
« on: February 20, 2015, 10:07:05 AM »
If you can access your gateway's configuration then you should be able to enable bridge mode yourself.   I can access mine by going to 10.0.0.1 and then selecting

Connection > Status > Click "Edit" on Local IP Network > Click Enabled "Bridge Mode"

I cannot say this works for certain bc when I initially setup my gateway a few years ago the login/pw to configure it wouldn't work so I had to call them and get them to do.   Currently I seem to have resolved my problems by throwing $$$ at it.   The old Wifi Router I was using was this...

http://www.amazon.com/Linksys-WRT54GL-Wireless-G-Broadband-Router/dp/B000BTL0OA/ref=sr_1_1?ie=UTF8&qid=1424458499&sr=8-1&keywords=linksys+wrt54g

and because the wife had a $100 gift card to best buy I went with this...

http://www.bestbuy.com/site/asus-wirelessac1900-dual-band-gigabit-wireless-router-black/8448381.p?id=1219334566012&skuId=8448381

As Far as I can tell the Asus AC68P is basically a Version 2 of the AC68U and has a slightly faster processor but is only sold at Best buy.   The AC68U is what I had decided on after some google searching but the P is working great.  I think the drastic difference is simply that the new router has a gigabit WAN so I can get EVERYTHING out of my connection.   Comcast has done that whole "Double what you have" thing a few times so I'm still not sure if I'm technically supposed to be getting 50 Mbps or 100Mbps....   I'm happy atm with what I get though..

Previous best while using old router was around 45 Mbps RIGHT after power cycling it.. which typically degraded down to about 25 through the day... and NOW...

This has been the same every time I checked it for the last couple of days too.

The 5Ghz band of the Wifi is pulling 100 Mbps on my Galaxy S4 through my whole small condo... and our Ipad 2 is getting upwards of 45Mbps on Wifi which is a drastic upgrade from the 5-6 Mbps we were getting on both devices before... Basically 2 phones + ipad + desktop can ALL be used at the same time with no lagging out.

Anyway.. considering the $100 gift card I ultimately walked out the door for $120 to fix the problem..   Been up for a few days and all is working great.   The Web config for the Asus Router is VERY nice also.

2
Hardware Design / Re: networking issues
« on: February 16, 2015, 07:40:24 PM »
I have almost the exact same setup as you Kham.  I have comcast blast Internet with 50 down / 20 up and the same model Arris gateway.   I originally used the gateway as router and wifi but found out that it is setup to block port forwarding (I believe... not a networkin guy) which wouldn't allow me to download movies and such like I normally do.   I did notice that with an rj45 hard line from the gateway to PC I would get speeds at or above 50 down.    I ultimately had them put the gateway in bridge mode and have been using a 8 yr old 54 Mbs Linksys wifi router (2.4 Ghz) for some time now.   Using my own router with a hard line to pc I get maybe 40 Mbs down if I speedtest but ONLY for a short period AFTER power cycling my router.   I regularly get between 12 -22 down if I don't power cycle my router and that can degrade drastically.   My current problem is that if anyone streams with the wifi my desktop will straight up lose connection like it has 0 bandwidth.   I'm actually considering buying an up to date wifi router in hopes of that being an easy fix.   Otherwise I will have to do more research.   Its like my speeds degrade over time and power cycling the wifi router fixes that temporarily.   I unfortunately use 5 he triple play pckg... so the gateway has Void which makes it difficult to by my own modem and stop paying comcast 9-10 bucks a month for it.....   Anyway... bride mode might work well for you assuming my old as dirt router is my problem.... Good luck getting a tech smart enough to do it.   3.5 hours on phone when I did it.   Had to Google how to confirm it was done and then argue with multiple techs..... Apparently the best way to go about it is simply tell them to escalate the call.   I got to 3rd tier and took the guy 1 min at that point.    Keep me posted on what you find out!

3
I cannot remember if you can do this with UOS.   Anyone know how it's done if possible?

4
Hmm.. Thanks Crome..   It's not functioning as far as I can tell for converting UOP -- > Mul atm...

I can take

artLegacyMUL.uop   and convert it to art.mul  and artidx.mul but when I tried to convert those back to UOP it tells me there are no mul files in that location...

5
Hey...   So Anyone know how to Edit Mage Field spells with this currently?  I'd like to have Flat tile Fields like I've had in the past. I used to use Mulpatcher but there is no Tiledata.mul anymore.....    Anyone heh?

6
Ah.. ok thx for the info.   Ultimately I'm trying to use the old program SWarmorCalc again put in piles of Legendary / Major Artifacts into the executable.   The part that takes a wee bit of time is changing the txt file of the armor pieces so that it includes versions of each piece that are adjusted appropriately AS IF you enhanced with Barbed / Horned etc...    So the goal is to be able to use EUO to read through the properties of ARMOR in a chest and write a text file which would basically contain multiple versions of each given piece adjusted correctly for special materials.   The more options I plug into SWarmorCalc the better the chances that craziness pops out....   The Wheel Turns....   What once was will be again....\

I used to use SWarmorCalc exclusively before imbuing came out and now with the crazy Arty's it's worth using again.

7
If I used Event property on the items in a box and then displayed the corresponding #property strings for each item all in one big list menu...   Is it possible to copy that info directly out of the list menu to the clipboard?   Ultimately I'd be producing a txt file out of the information but instead of using UOA's vender agent to do it I was wondering if copying out of a menu was possible?    I know I could execute and write info to a file but it's been awhile since I've played with that stuff and didn't know if a simple copy/paste would do it?

9
Script Debug / Re: Voice control
« on: September 01, 2014, 07:20:17 PM »
My 5 year old INSTANTLY follows my voice commands on when to hit buttons...... she does tend to hold the button down though..  = )

10
Yep.. Crisis FTW !   I actually figured it out in about and hour but that's only because I found my word Document detailing to myself how to use the CLAW and the various parts of TM's Rail System that I use.   I figured at some point I would forget and didn't want to have to dig through the various threads to find the info.   Still Amazing though TM and working great.

11
Hey... quick question about loading looting config files.   I have my new pc setup but it's giving me an error when I try to get my old looting profiles loaded up in the CLAW.   I have EUO installed on the C: and my Documents file with all my scripts is on D:\documents\Shame_Loot.txt   ....

It's been a LONG time since I've actually played uo and just don't remember how I should have it setup.  Anyone?

12
Script Debug / Re: My heartwood quester needs some help
« on: August 06, 2014, 03:56:44 PM »
Yea..... back in the day when Heartwood was brand new and the "Bottle" Quest was dropping insane loot for only a few bottles I wrote a quick down and dirty script for guildmates / myself and simply figured out where the one unique pixel was for my specific Quest and just checked that 1 spot.   If I remember I took some screenshots and ended up magnifying it all in ms paint lol....  I kinda knew what I was trying to do but it took awhile to get there and eventually worked.  That Bottle quest was only good for a short while before they nerfed it but it was well worth it!

13
Script Debug / Re: Regarding Display OK
« on: August 06, 2014, 03:52:11 PM »
Not that I know of.....  doesn't mean it's not possible but I haven't seen it done in a script yet.

14
Yea... I told myself ages ago that I would never use $$ to but the tools so I always pick them up if I see them for a decent gold price.   That does mean that I only use them when 5 he difficulty of the piece require a it...    A 2000+ Sampire luck suit etc.

15
Script Debug / Re: Picking a specific onscreen gump
« on: July 26, 2014, 04:56:00 PM »
If you have multiple gumps open you can only manipulate the focused 1 aka top one.   My quick and dirty fix for this was a subroutine where you input the specifics of the Gump you wanted to focus on focus on and then it would do  a certain number of mouse clicks around your screen looking for that gump.   Say the gump takes up 1/4 of your play area then with 4 clicks you can d focus on that gump or close out other gump covering it etc...

Pages: [1] 2 3 ... 38