ScriptUO
Official ScriptUO EasyUO Scripts => Script Library => Crafting => Topic started by: manwinc on January 09, 2010, 12:23:47 AM
-
I'll combine them all into one script Eventually :)
The Woodland Leggings Portion of My Armor Crafter was Designed to Craft HCI leggings Only, and that is all it does for Carpentry Armor.
;=======================================================
; Script Name: MWinc. Armor Crafter
; Author: MWinc.
; Version: 0.2
; Client Tested with: Baja
; EUO version tested with: 163
; Shard OSI / FS: OSI
; Revision Date: 1/10/10
; Public Release:
; Purpose: Crafts Gear So 1 Resist is at Maximum For Imbuing
;=======================================================
; Basic Concept
; When Imbuing Gear, How high the initial Resist on the piece
; Doesn't AFFECT How High the resist Can go.
; So 4 Fire upgardes to 19 Fire
; And 10 Fire Upgrades to 19 Fire(Wasting 6 Resistance from the first one)
; Factoring that In, you want to OPTIMIZE Your Resistances
; And Have basically ZERO WASTE Leaving Plenty of room
; FOR OTHER ADDS
; Finding a Minimum Resistance is Better than Finding
; A maximum Resistance Piece, But Often Enough they travel
; In pairs. For instance A piece with 14 Cold and 3 Poison.
;======================================================
; -Introduction-
; This Script Will Craft A Leather Item of Your Choice
; And Look For Either A Resistance Greater Than or Equal To A Maximum
; Resistance you want, or look for a Resistance less than or equal
; To a Minimum Resistance You want
;======================================================
; Requirements
; 1. A pair of Scissors
; 2. Leather in your Secure (Only regular)
; 3. Ingots in your secure (Only iron if you want to craft Sewing kits)
; 4. A tinker Tool on you if you want it to craft sewing Kits
;======================================================
; Suggestions
; 100 Arms Lore
; Only craft with Regular leather. Imbue the resists you want
; Then Try and Enhance, then Imbue the rest of your adds.
;======================================================
;=======================================================
; Script Name: MWinc. Shuriken Poisoner
; Author: MWinc.
; Version: 0.1
; Client Tested with: Baja
; EUO version tested with: 163
; Shard OSI / FS: OSI
; Revision Date:
; Public Release:
; Purpose: DP's Shurikens
;=======================================================
;Directions
;=======================================================
; Have a secure container with Shurikens In it and
; The poison of your liking (no darkglow or parasitic)
; Have another secure to move the Poisoned shurikens to
;======================================================
; I was at 100 Poisoning, and Never failed/got poisoned by
; The script so never added in Curing :)
;=======================================================
; Script Name: MWinc. Shurikens
; Author: MWinc.
; Version: 1.0
; Client Tested with: Baja
; EUO version tested with: 132
; Shard OSI / FS: OSI
; Revision Date:
; Public Release:
; Purpose: Crafts 10 Use Shurikens
;=======================================================
;Requirements
;=======================================================
; A secure container
; Enough blacksmithing to craft Shurikens
; A ninja Belt
; Iron Ingots to make shurikens with
; Smithing Hammers/Tools
; ONLY IRON INGOTS IN BACKPACK AND SECURE
;=======================================================
;Directions
; Hit play
;=======================================================
-
I hope its okay that I just post them all in one Topic Header, I only view the armor crafter as Anything "Significant" as far as scripts go.
-
Excellent.
Thank you.
-
I'll give them a whirl manw.
Two questions though:
Can the shurikens poisoning also use fuyika darts if I add IDs?
Why only hci woodland legs? I've been ripping out gauntlets/arms/gorgs/and even chest pieces for nice suits.
I'll give some of these a tryout today anyway.
Thanks
-
I forgot About Fuikyas, should just require 3 Changes... Let me add that into the settings.
The only reason that I used the Leggings was because that was the only wood piece I was using in my suit :P. I've only ran 40 hci on my pvp archer since the dawn of time, and felt like i'd change that :). It shouldn't be too hard to add in the rest of them. its a pretty simple setup.
-
Updated the Crafter to make all woodland pieces. and You have the option for which add you are looking for
-
Actually if all you want to do is Poison the Fukiyas. should be as simple as Swapping out the types for shurikens with fukiyas, but I'll add in a variable so it simply does both.
-
Cool, I appreciate it. I use a lot of shurs & darts on OMGBurgers guildies butts on my main shard. ;D
-
Cool, I appreciate it. I use a lot of shurs & darts on OMGBurgers guildies butts on my main shard. ;D
haha Soon to be me also. :) I'm making a necro/mage to fight with them there. You're in trouble. heh
-
Excellent! Now I can size you up with my own eyes. :-*
-
Was missing a } In my Armor Crafter when I updated it, will fix when I get home from work.
-
Can I make a script request?? I would like one to make blank scrolls from the wood pulp. Let me know if you have time for this, if not, I'll see if I can find enough spare time to do it!
-
Sure, Shouldn't be too hard. one sec.
* Just realized all the shards are down, so it might be a little hard. Guess I could Shoot From the Hip*
-
Great stuff M. The armor crafter is powerful and something I had been looking at as well. I think you might want to adjust it to allow crafting with special ingredients since you can imbue them now.
-
??? Crafting with special ingredients? You mean Special resources?
-
I suppose you are right. I switched tags in a script last week according to your semantics, but I was not sure whether it was standard vernacular or just my preference.
I like where you are heading with this regardless. Have you put together a sub that returns durability yet? I have been badgering EN to write a sub that parses out the durability on an item and returns it as a variable so that I can use it to apply PoF prior to imbue... I think I could do it, but it wouldn't be pretty.
-
I believe it's already written. :) I didn't write it, but I've seen a good durability checker somewhere...
-
Any ideas? I will poke around EUO and see if I can find one there, but I thought I already had. Maybe I will start a thread here to see if anyone has one.
-
Hahaha, I can write one easily.
-
Gosub Durability (Id of item)
sets %Durability to the actual durability
sets %Max_Durability to the max durability
sub Durability
event property %1
set %string #property
str CNT Durability
if #strres < 1
return #false
Str Pos %string Durability
set %End #strres + 10
str del %string 1 %End
set %String #strres
str len %String
set %Length #strres
str Pos %String /
set %End #strres - 1
set %End2 #strres
Str Left %string %End
set %Durability #Strres
set %Right_Len %Length - %End2
STr Right %String %Right_Len
set %Max_Durability #strres
return #True
-
But, when it comes to imbuing. You want to do it out of regular leather First, and get the minimum resist and then POF it, Imbue On the resist you want, and then attempt to Enhance it.
Thats the difference between having 19 Fire and 22 FIre on an imbued piece.
Sure you go through POF and Boura Pelts, but were scripters, having butt tons of resources is what we do best :)
-
We are on the same page M, I am just a couple of textbooks behind you... Thanks for the sub!!!
-
np, I needed to make one anyways for the ARMY!!! BUAHAHAHAHA
-
so i am running the shuriken script and it seems to not be working anymore? it opens the crafting menu for the shurikens then it just keeps repeating i believe the line is
wait 1
until #contsize = %CraftMenu || %Timer_Limit < #scnt
630 and 631
goes through that then goes and repopens the tool again. any help on this?
-
I was hoping noone would notice!!! change %Craftmenu at the top of the script to 530_497 I'll do it later tonight when I get home.
-
haha caught you your sneakiness! thank you for the support
-
ahhh the countless hours saved! thank you mwinc for the support
-
Fixed the Armor Crafter, and the Shurikens. I removed the Bola Crafter and the Wood Pulp until I get them Fixed.
-
awesome thanks
-
Is this no longer downloadable?
-
Is this no longer downloadable?
Check your private messages.
-
shirken script works great will test others as i get to them been testing alot differnt scripts past few days
-
Moved to Public Script Library, Crafting.
X
-
Why thank you, I forgot about these
-
so with making the leather armor you just use normal leather and a normal sewing kit?
-
You can use any leather, but yes, you use regular sewing Kits.
-
You can use any leather, but yes, you use regular sewing Kits.
yeah i realized the leather part, got 4 full sets of garg leather armor so far, pretty handy script
-
I frequently make LRC suits that are 100% LRC, all 70 resist, Mana Inc 42, Mana Reg 6. The part that really slows down the process is making sure to hit the all 70 resist. I haven't had the opportunity to use this script but I was wondering if this is something that is going to help me with my suit making process?
I have often desired a script that would do all this for me but can't imagine it would be easy to make a script that would make 5 pieces and then calculate the resists, then figure out which resists need to be adjusted (imbued) to reach the all 70 goal. Once all 70 then it would imbue the MI 7, MI 1, and LRC 17 to each piece.
Is a script that can accomplish this possible?
-
Using the minimum resist feature of my script you can craft blank pieces with a minimum resist that you can imbue up, then you sort those into chests, using an excel sheet you can decide what resists you want to imbue and what the resists that are necessary before imbuing, and there are a few suit combiners out there that will combine all the pieces till it finds the combination you need.
-
Suit combiners?
-
Hmm... Don't know of any exact links, Anyone else reading this forum know of any other scripts out there that look at pieces of armor and combine them until it finds a combination that gives the adds you want?
-
SWArmorCalc (http://www.scriptuo.com/index.php?topic=5158.0)
Not a script, and a bit outdated, but the absolute best armor combining program available.
There's provisions to include newer artifacts in the registry.
Not sure about new "types" of armor. Might have to physically rename specific armor types to "gorget" or something to get it recognized.
-
Thanks... I will give it a look when I get off work tonight.
-
Sooooo going to test the armor crafter out tonight, it sounds awesome.
-
Anyone know if there is a newer version which crafts not only the woodland leggings but the rest of the woodland armor, this would be handy now that reforging woodland armor is popular...
-
I love the Armor Crafter.
I modyfied it, that it also craft the rest of woodland Armor. Very easy...good job.
-
Does that aromor script work for all armor, or just woodland? Gonna try it out :) Am new to scripts, but i have a vendor mall at my house, and these might make my daily crafting life a bit more easier =)
-
it makes also leather armour
but it's easy to implement all other type of armour
-
So under the "My Setup" part of the script you input the resists you want in there and the armor craft script will hold on to the resists that you are looking for?
-
I too was wondering that same very thing.
I tried changing various parts of the script to try and figure out where to change it, unfortunately i couldn't nail down the right one.
Any help would be appreciated!
Thank you
-
Cant download this script anymore?
-
Cant download this script anymore?
You need to go back and look at your introduction post. I posted on there what you needed to do to fix up your introduction so you could become unrestricted. Once you are unrestricted, you will see all 3 downloadable scripts in this thread.
-
I love the armor crafter script! It's such a huge help! Is it possible to modify it so that it can scan for multiple resists? For example, if I'm going to be reforging, and want to set minimums for all 5 resists, and not just one?
-
I dont normally post but i cant figure out how to put woodland armor and stubbed armor into the script if anyone can help I would much appreciate it
-
Wow that script is old. I'll take a swing at showing you how to modify it though. Maybe I'll rewrite that portion.
-
*Vomits* OLD CODINGGGG AHHHHH *Cries*
lets see if we can make a new version
-
That would be awesome for a newer version. Thank you very much Mwincs keep up the awesome work
Post Merge: July 20, 2014, 10:32:56 AM
think we could also a way to put what we would like the resist to be under like say i want fire and phy at like 3 and 4 resist but the others high or any combination where more than one resist will be low. im not sure i think trail has one that like that but thats only a option since i know it may take some time to upgrade anyways ty mwincs
-
I'd have to use my Prop_eval or Tm's Claw in order to do that.
-
what ever works for you mwincs i am terrible at writing scripts so whatever u think would be best i was just throwing out an idea
-
hey Mwincs how are we looking u able to get anywhere on this. Just seeing if you even had a chance to get to it
-
Was Trying to just Change the way it adds/pulls data from the menu and make it easier to add/remove items from the list, but it wasn't plugging in so well. Have to start it from scratch.
-
ahh i see i wish i could help out but only thing i am really good at is moding a script with a line here and there. but ty so much so doing this it is a big help since imbuing has changed so much
-
Thanks manwinc, you rock!! I can't wait to see what you come up with! :)
-
Ok I am a freakin noob when it comes to this resistance stuff and what to set it to look for. I would love some advice/help figuring it out. Here are the variables that can be changed:
; Max Resist comes in handy in gear that doesn't need MULTIPLE resistances
set %Max_PH_Resistance 0
set %Max_FI_Resistance 0
set %Max_CO_Resistance 0
set %Max_PO_Resistance 0
set %Max_En_Resistance 5
; You can have 18 Energy, and 20 Poison after enhancing and Only waste
; 1 Add For instance :)
set %Min_PH_Resistance 20
set %Min_FI_Resistance 20
set %Min_CO_Resistance 20
set %Min_PO_Resistance 20
set %Min_En_Resistance 5
;My Settings:
; Normal Leather (Non gargish) Still testing :)
; Maximum Resistance - 14
; Min Physical - 2
; Min Fire - 4
; Min Cold - 3
; Min Poison - 3
; Min Energy - 3
; Regular Wood
; Min Physical - 6
; Min Fire - 4
; Min Cold - 3
; Min Poison - 4
; Min Energy - 3
;=======================================================
; My setup Stuff
set %Secure *Mwinc_ArmorCrafter_Secure_ . #charid
set %startscnt #scnt ; Start Time
set %MW_Item 0
set %Max_Resist 0
set %MW_Max_Resist 0
set %MW_Min_Resist 10
set %Min_Physical 10
set %Min_Fire 10
set %Min_Cold 10
set %Min_Poison 10
set %Min_Energy 10
Now I am thinking that I would want one resist to be as low as possible for me to imbue that one to max while keeping the other 4 resists under 10 so that it doesn't count it as one of the 5 imbue slots available. Am I correct in thinking this? If so, what would I change to set it to look for that?
If I am wrong, please explain it to this noob!
Thank you in advance!!! 8)
-
Ok I am a freakin noob when it comes to this resistance stuff and what to set it to look for. I would love some advice/help figuring it out. Here are the variables that can be changed:
; Max Resist comes in handy in gear that doesn't need MULTIPLE resistances
set %Max_PH_Resistance 0
set %Max_FI_Resistance 0
set %Max_CO_Resistance 0
set %Max_PO_Resistance 0
set %Max_En_Resistance 5
; You can have 18 Energy, and 20 Poison after enhancing and Only waste
; 1 Add For instance :)
set %Min_PH_Resistance 20
set %Min_FI_Resistance 20
set %Min_CO_Resistance 20
set %Min_PO_Resistance 20
set %Min_En_Resistance 5
;My Settings:
; Normal Leather (Non gargish) Still testing :)
; Maximum Resistance - 14
; Min Physical - 2
; Min Fire - 4
; Min Cold - 3
; Min Poison - 3
; Min Energy - 3
; Regular Wood
; Min Physical - 6
; Min Fire - 4
; Min Cold - 3
; Min Poison - 4
; Min Energy - 3
;=======================================================
; My setup Stuff
set %Secure *Mwinc_ArmorCrafter_Secure_ . #charid
set %startscnt #scnt ; Start Time
set %MW_Item 0
set %Max_Resist 0
set %MW_Max_Resist 0
set %MW_Min_Resist 10
set %Min_Physical 10
set %Min_Fire 10
set %Min_Cold 10
set %Min_Poison 10
set %Min_Energy 10
Now I am thinking that I would want one resist to be as low as possible for me to imbue that one to max while keeping the other 4 resists under 10 so that it doesn't count it as one of the 5 imbue slots available. Am I correct in thinking this? If so, what would I change to set it to look for that?
If I am wrong, please explain it to this noob!
Thank you in advance!!! 8)
No having a resist over 10 doesnt matter it wont count towards 1 of the 5 imbue slots. Like with me I was making stubbed leather with reg leather trying to get low phy and fire so i could imbue fire and later enhance with spine for the physical. ex of pieces i was making are 4 4 8 9 10 or 4 5 7 9 11. so dont worry if they are over 10
-
say can you help me fix this scrip MWinc. Shurikens ?
I tried it this morning don't work or am I doing something wrong ? thx
-
trying to figure out the Shurikens script. once it fills up with the 10 it doesnt remove them from belt an move them to a container. does anyone know what im doing wrong
-
Ugg all these scripts are so old. One sec.
-
thank you mwincs :)
-
Updated on the front page. Redownload the script and try that.
-
thanks man
-
hi won't let me download the script.
-
You are restricted. You need to go to the New Member section and start looking at the sticked posts to see how to become a full member.