61
Off Topic / Re: Registry Fix
« on: December 18, 2013, 05:13:31 PM »
Do what I did, since memtest takes a few hours per stick. Run it when you go to bed and if it shows errors in the morning then you know for sure 
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
62
Off Topic / Re: Registry Fix
« on: December 17, 2013, 07:42:48 PM »
Honestly if your Ram is going bad you could have a perfect registry and it wont make any difference. To know for sure use this tool. You need to burn it to cd and run at boot, it will test your ram and find any bad sticks. I had to use it before.
http://www.memtest.org/
http://www.memtest.org/
63
General UO Chat / Re: EM Gifts
« on: December 16, 2013, 01:59:58 AM »
Was in there killing my daily golder ele's and a jerk kept running around and luring liches outside and then taking off. Finally came in after I dropped them all and said he thought I was scripting.
Im like no only for taming would I do that. Jerk.
Im like no only for taming would I do that. Jerk.
64
General UO Chat / Re: Farming Blackthorn Castle
« on: December 12, 2013, 12:49:40 PM »
TM would be great, get one and make a small video of you sitting at a desk. And just say the following...
"So you want to get Elite status?" *Rips down velcro* *Rub*
Then when people ask about Elite you can just link to that video :p
"So you want to get Elite status?" *Rips down velcro* *Rub*
Then when people ask about Elite you can just link to that video :p
66
General UO Chat / Re: Where is a good place to go sell my Dread Mare FAST?
« on: December 12, 2013, 10:14:00 AM »
Whats your offer Hoby? If you are serious? PM me
67
General UO Chat / Where is a good place to go sell my Dread Mare FAST?
« on: December 12, 2013, 05:00:44 AM »
I am in need of gold or cash or both. So I dont mind offing him to the best payer, or cheaper to a friend. Last I heard the other day they go for 100mil? Or was it 1bill? I think mill, dont remember.
All I know is I will go well below market for friends, even if you want to resell it to make a profit.
So where to go to auction him?
All I know is I will go well below market for friends, even if you want to resell it to make a profit.
So where to go to auction him?
68
General Discussion / Re: No Z Axis for tradeskill equipment. (Forges, Soulforges)
« on: December 12, 2013, 04:40:42 AM »
Well since its not so common knowledge, does Coragin get in the super secret area?
69
Xbox 360 / Re: replacment parts for xbox 360?
« on: December 11, 2013, 04:20:30 PM »
TM I can tell you beyond a shadow of a doubt (on fixing that is) I re-ball the chips, I got all the equipment to do it. And I replace the non-leaded with leaded solder balls and leaded based flux paste, never ever has a problem again.
X-Clamp is 4 screws and 8 washers for each heatsink, it is supposed to fix it so no more flexing from the xclamps, although I have seen them come back 100x worse because of it. Overtightening is the biggest issue, people forget you should only put enough tension on them to snug it. Too many people torque them down with the force of thor.
And yeah bodfather, howd it work?
X-Clamp is 4 screws and 8 washers for each heatsink, it is supposed to fix it so no more flexing from the xclamps, although I have seen them come back 100x worse because of it. Overtightening is the biggest issue, people forget you should only put enough tension on them to snug it. Too many people torque them down with the force of thor.
And yeah bodfather, howd it work?
70
General Discussion / Re: No Z Axis for tradeskill equipment. (Forges, Soulforges)
« on: December 11, 2013, 01:01:46 PM »
lol
71
General Discussion / No Z Axis for tradeskill equipment. (Forges, Soulforges)
« on: December 11, 2013, 12:01:48 PM »
This is an old bug, but not many people know it. There is no Z axis for things you need to stand near to do crafting...
i.e. Soulforge's, Forges, Anvil's, and the like.
What does this mean? Well your crafting room just got bigger!
example: In my keep, the first main room you enter is my crafting room, but I placed the soulforge, forges and anvils on the roof. I am able to smith and imbue on the first floor because the code does not mention Z axis for them. So I have a ton of chests and no forge or soul forge in my crafting room. Gives you a lot of room to store all your supplies for all trade skills within arms reach because you dont need to work around those big bulky things.
Now let me in :p
i.e. Soulforge's, Forges, Anvil's, and the like.
What does this mean? Well your crafting room just got bigger!
example: In my keep, the first main room you enter is my crafting room, but I placed the soulforge, forges and anvils on the roof. I am able to smith and imbue on the first floor because the code does not mention Z axis for them. So I have a ton of chests and no forge or soul forge in my crafting room. Gives you a lot of room to store all your supplies for all trade skills within arms reach because you dont need to work around those big bulky things.
Now let me in :p
72
Off Topic / Re: Ugh Migrane
« on: December 11, 2013, 11:27:34 AM »
Well good news is my doc knows and I have norco (hydrocodone/vicodin for those who dont know) I have that for Fibromyalgia 6/daily at 10/325. I usually dont need all that much so when I get real pain flare ups, I take 1.5/2 and usually I feel better.
They used to have me on morphine and percocette but I felt that was too too much. I honestly said "Really? Morphine? We dont start with something smaller like Tylenol 3?" tried it for like a year and got sick of my eyes always crossing and being tired all the time. As morphine even IV Push has never really helped me as much as smaller drugs do (hence norco instead of precs and morphine.)
I dread the day when it gets bad enough that I have to take oxy or something, I dont like pills to begin with but these actually do help.
They used to have me on morphine and percocette but I felt that was too too much. I honestly said "Really? Morphine? We dont start with something smaller like Tylenol 3?" tried it for like a year and got sick of my eyes always crossing and being tired all the time. As morphine even IV Push has never really helped me as much as smaller drugs do (hence norco instead of precs and morphine.)
I dread the day when it gets bad enough that I have to take oxy or something, I dont like pills to begin with but these actually do help.
73
Off Topic / Ugh Migrane
« on: December 11, 2013, 02:51:26 AM »
Behind my eyeballs.
In my teeth
Anyone know this kind of pain? Know anything that might help?
Already tried cold, hot shower, nettie pot, ugh this sucks.
about to take a zyrtec to see if that helps.
In my teeth
Anyone know this kind of pain? Know anything that might help?
Already tried cold, hot shower, nettie pot, ugh this sucks.
about to take a zyrtec to see if that helps.
74
Xbox 360 / Re: replacment parts for xbox 360?
« on: December 10, 2013, 04:08:25 PM »
Its cheap solder balls, non-leaded kind. They form hairs that touch adjacent solder balls (all under this CPU/GPU chip). This method should get you going.
75
Xbox 360 / Re: replacment parts for xbox 360?
« on: December 09, 2013, 07:11:47 PM »
This is the Ghetto way, but should get it running again...
(Mind you I buy 360's by the pallet broken, fix and resell, last pallet was 80)
1. Turn it on.
2. Take a hair dryer, HIGH heat LOW SPEED.
3. Point it into the rear vents about 6" away from it, depending on strength of heat from blow dryer.
4. Keep an eye on the rear plastic and try not to melt it (Its easy to do when you get it real hot, and that is what you want to do here.)
5. After about 2-2.5 minutes place your palm on the top of the 360, make sure it got nice and hot in there, we want over 100c right around to 110c the melting point of the solder is like 126c. Dont worry you wont break it worse.
6. While the hair dryer is still running turn off the 360 and back on (Remember you want to be heating it up while its running not while its off). If it dont boot continue turning it off and back on until it does. That should reset the internal protection.
WTF didnt post! Better this time!
(Mind you I buy 360's by the pallet broken, fix and resell, last pallet was 80)
1. Turn it on.
2. Take a hair dryer, HIGH heat LOW SPEED.
3. Point it into the rear vents about 6" away from it, depending on strength of heat from blow dryer.
4. Keep an eye on the rear plastic and try not to melt it (Its easy to do when you get it real hot, and that is what you want to do here.)
5. After about 2-2.5 minutes place your palm on the top of the 360, make sure it got nice and hot in there, we want over 100c right around to 110c the melting point of the solder is like 126c. Dont worry you wont break it worse.
6. While the hair dryer is still running turn off the 360 and back on (Remember you want to be heating it up while its running not while its off). If it dont boot continue turning it off and back on until it does. That should reset the internal protection.
WTF didnt post! Better this time!