ScriptUO

Official ScriptUO EasyUO Scripts => Script Library => Questing => Topic started by: TrailMyx on September 14, 2008, 10:20:56 AM

Title: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on September 14, 2008, 10:20:56 AM
Please read the Site Rules (http://www.scriptuo.com/index.php?topic=447.0) to become familiar with the download requirements of this script

Code: [Select]
;=================================================================
; Script Name: SUOQuester - ScriptUO Heartwood Quester
; Author: Cerveza / TrailMyx
; Version: 1.27
; Shard OSI / FS: OSI / FS?
; Revision Date: 2007/05/05
; Purpose: Heartwood Quester with reload support for beetles
;          Only does Fletching (bows) and Carpentry (stools)
; Special Thanks:
;       SorrowMaster - original SMQuester
;       Cerveza      - Conversion of SorryMaster's work to SMQRail
;       Bad_Maniac   - BMItemEval
;       Machine      - craftItem
;       TrailMyx     - Rail engine, Runebood subs, TM_CLAw
;       j4bber       - Scripting assistance, suggestions and subs
;       Maverick/Drak/Cake2/gatecrasher - Testing and suggestions
;
;=================================================================
; Revision History:
; v0.90 - Initial Beta Release
;       - Fletching ONLY
; v0.91 - Added Carpentry quest
; v0.92 - - Added hiding
; v0.93 - Hardcoded number of boards for packy
;       - Removed loading char with boards
; v0.94 - Added make tools at secure
;       - Added board check (Thanks Drak for the feedback)
; v0.95 - Bug Fixes: delay problems, fletching tools
;       - Added dump loot to secure (thanks J4bber)
; v0.96 - Should keep 2 tinker tools on you, loading from secure
; v0.97 - TrailMyx - Included rail system for testing
; v0.98 - J4bber - Fix for board stacks
; v0.98a- TrailMyx - OCR for toggling quest items
; v0.981nokal - TrailMyx - No KalInEx ocr, modified load_boards1
;             - Fix for make tools
; v0.985nokal - TrailMyx
; v0.987nokal - TrailMyx - complete rewrite of crafting sub
;             - random bag placement
;             - reset of crafting tools to configurable resource color
; v0.988 - TrailMyx same as v0.987nokal with test rails removed, phased out KalOCR
; v0.989 - TrailMyx fixed OCR and carpentry tools setup bug
; v0.9891 - TrailMyx fixed OCR wrong quest, drop bag in pack
;         - added waits for stability
;         - added quest count and safe recall rune support for ending script.
; V1.0    - FINALLY! Thanks TrailMyx / J4bber and all the testers
; v1.01   - stability additions
; v1.10   - Use virtues to clear cursor
; v1.13   - Switch back to key ESC to fix bugged cursor.  Thanks Mystre!
; v1.14   - Removed honor self.  Added ability to use resources other than normal color
; v1.15   - Removed s7 subs for recall.  Added Beetle unhiding feature.
; v1.16   - Now exclusively at ScriptUO.com
; v1.20   - Added support for Advanced CLAw Lite/Full.  Revised UI a little bit
; v1.21   - added CLAw startup check
; v1.22   - Added file saving support.  Added bank support.
;=================================================================
; Preview of SUOuester V2.0:
; - save config
; - bank support (multiple random banking refills)
; - random landing spots in heartwood <-- DONE
; - more (all?) quests, selectable from setup menu
; - menu with status
; - new user configurable loot evaluation system
; - ????
;=================================================================
; Files Needed: Make sure they are all in your EUO directory
; - BMItemEval.euo         - Evaluates loot
; - tool_railengine30g.txt - Rail Engine to move char
; - hw_trinket.txt         - Rail File for path to trinket quest
; - hw_bowcraft.txt        - Rail File for path to bowcraft quest
;=================================================================
; Disclaimer:  By running this script, you are accepting the contents of this licence agreement.
; This script is only authorized to be distributed on www.scriptuo.com.  If you purchase this script,
; acquire it from another website, it is not considered an authorized copy and should be deleted
; immediately.
; You hold the author, TrailMyx, and the distribution site www.scriptuo.com not liable for any loss of
; items, accounts, monitary or time losses associated with the use of this script.  Furthermore, you promise
; not to distribute or sell this script to anyone without the express permission of the author, Trailmyx.
; Violation of the contents of this agreement will result in one of the following: litigation, www.scriptuo.com
; account termination, discimination of bad karma for your next life, and most definitely causing a black mark
; placed on your soul.
;
; I worked very hard to bring this script to you, so please use it responisibily and
; respectfully.  If you have any questions, please reach me at trailmyx@yahoo.com.
; (c) 2007 TrailMyx, All rights reserved.
;===================================================================

(http://www.scriptuo.com/Pictures/suohw122.jpg)


Requirements:
Please check these off before you request help on the forum


Ok, here it is after all.  Finally got around to stubbing in the CLAw looter into this a while ago and am only now publishing it.  There are a couple changes you'll notice:

1) There is now a persistent UI for this script. 
2) Checkmark for BMItemEval or TM_CLAw.  You may use both if you wish.

In order to use the TM_CLAw looter, you must do the following:

0) This script requires all the same minimums as the earlier verison.  Please refer HERE (http://www.scriptuo.com/index.php?topic=69.0)
1) Have the CLAw running in a separate tab and wait until it fully initializes
2) load the starter CLAw configuration file, sampleclawsetup.txt by entering this filename in the "Setup File:" TextBox of the CLAw UI and press "Load File"
3) Wait for the file to load, then press "Save File".  You will only have to do this once to make the looter remember what loot configuration file it will always use.
4) Start the Quester and follow the directions.

Note that the quester will now wait for you to press "Start" in the Quester UI menu, and the menu will no longer disappear.

A big thanks to Bad_Maniac (http://www.easyuo.com/forum/profile.php?mode=viewprofile&u=1432) and Machine (http://www.easyuo.com/forum/profile.php?mode=viewprofile&u=137201) for some of their work included in this script.

Please note that you will also have to download the Rail Engine (http://www.scriptuo.com/index.php?action=dlattach;topic=16.0;attach=6) with the rest of the files attached.

Download the CLAW Lite Autolooter (http://www.scriptuo.com/index.php?topic=17.0) here.


One GOOD into post required to download scripts here at ScriptUO!

Please read HERE (http://www.scriptuo.com/index.php?topic=447.0) for more about the site rules.

Also read HERE (http://www.scriptuo.com/index.php?topic=1750.0) for additional information about your restricted status if you are a newly registered member.

Version 1.24 is posted for people who still require the old crafting menu.  It is no longer actively supported.

BTW, here's a link to the post that helps you setup your beetle pack since EUO is broken:

http://www.scriptuo.com/index.php?topic=374.msg48553#msg48553
Title: Re: ScriptUO Heartwood Quester 1.21 with Advanced CLAw support
Post by: TrailMyx on September 14, 2008, 10:21:16 AM
And here's the Q/A:
Q:
How do I know the CLAw is evaluating the loot?
A:
Locate the "Status:" line at the top of the CLAw UI.  You should see "X items evaluated, Y items looted" after the script opens the pack.  You will also see messages here for CLAw status like "Evaluating..." and "Dragging..."
--------------------------------------
Q:
Is the CLAw looter looting my heartwood saws and kits?
A:
No, that process is handled by the Quester so you don't need a looting rule for those in the CLAw
--------------------------------------
Q:
The CLAw seems to lock up while I'm running the quester.
A:
Do not hide while you use the quester.  This will stall the looter. (Fixed in 0.771 CLAw)
--------------------------------------
Q:
I fizzle alot when I cast spells and can't seem to make tinker's tools
A:
This script is NOT meant for new characters (i.e. less than 50 skills in crafting/magery).  Please take some time to work your skills up so that you will be more successful in spell casting and crafting.  I recommend 65.0 or greater in your tinkering/magery/chivalry/bowcraft/carpentry.  Please do not post issues when your skills are too low!!  You will only get laughed at because of your newbness.
--------------------------------------
Q:
The script doesn't put items into my beetles pack
A:
You may have to re-run the guided setup.  If your beetle dies or you switch beetles, this is a must.
Due to a bug in EasyUO, you need to attempt to open the beetle pack yourself during the guided setup.  Here's a link to that explanation:
http://www.scriptuo.com/index.php?topic=374.msg48553#msg48553
--------------------------------------
Title: Re: ScriptUO Heartwood Quester 1.21 with Advanced CLAw support
Post by: TrailMyx on November 09, 2008, 10:52:56 AM
Anyone having problems with the setup portion of this script should download the latest version of the CLAw (>759).  I fixed an error where #LOBJECTID might become corrupted.
Title: Re: ScriptUO Heartwood Quester 1.21 with Advanced CLAw support
Post by: TrailMyx on February 16, 2009, 10:07:10 PM
OK, I'm about to update this script with a few new features.  I'm adding bank support as well as the script will remember your last setup so you don't have to keep going through the setup each time you run it.  Stay tuned.
Title: Re: ScriptUO Heartwood Quester 1.21 with Advanced CLAw support
Post by: Khameleon on February 17, 2009, 01:15:38 AM
wow its like Christmas for the UN-lite.

Title: Re: ScriptUO Heartwood Quester 1.21 with Advanced CLAw support
Post by: Xclio on February 17, 2009, 05:57:14 AM
No joke, when do we get our christmas????
Title: Re: ScriptUO Heartwood Quester 1.21 with Advanced CLAw support
Post by: Masscre on February 17, 2009, 07:08:26 AM
Hi TM i am trying the newer quester out today 121 and am running into an error about the rail it wants tool_railengine30k.txt but i have tool_railengine30i.txt any way i can get a copy of the k version please?
Title: Re: ScriptUO Heartwood Quester 1.21 with Advanced CLAw support
Post by: TrailMyx on February 17, 2009, 08:37:07 AM
Hey Mas,

It's posted here:

http://www.scriptuo.com/smf/index.php?topic=16.0
Title: Re: ScriptUO Heartwood Quester 1.21 with Advanced CLAw support
Post by: Masscre on February 17, 2009, 08:54:08 AM
Thanx for the pointer TM i did not think it would be in another post my bad :(
Title: Re: ScriptUO Heartwood Quester 1.21 with Advanced CLAw support
Post by: TrailMyx on February 17, 2009, 09:21:16 PM
I have the new save/load feature working pretty well.  You can just load the script and press Start now.  Pretty nice (although the 2.0 users have had this feature for years... ;) )
Title: Re: ScriptUO Heartwood Quester 1.21 with Advanced CLAw support
Post by: TrailMyx on February 23, 2009, 03:55:41 PM
BTW, I'm testing this on Windows 7-64bit and it works pretty well (v1.22).  The bank support is pretty slick.

I haven't been in heartwood for a while.  It's funny how many people use this script.  lol.
Title: Re: ScriptUO Heartwood Quester 1.21 with Advanced CLAw support
Post by: Khameleon on February 23, 2009, 04:47:17 PM
you its funny you say that. so many people use the script yet, Heartwood Kits haven't Fallen in price yet.
Title: Re: ScriptUO Heartwood Quester 1.21 with Advanced CLAw support
Post by: TrailMyx on February 23, 2009, 04:49:47 PM
Well those kits are still almost impossible to get.  After all this time, I've only gotten 1 of each.  And that's alot of wood.  I burned through my entire stock of normal wood and oak during the clean up campaign and didn't get squat (like 1.5M boards)
Title: Re: ScriptUO Heartwood Quester 1.21 with Advanced CLAw support
Post by: Hollywood_Shono on February 23, 2009, 05:28:13 PM
Found It
Title: Re: ScriptUO Heartwood Quester 1.21 with Advanced CLAw support
Post by: TrailMyx on February 23, 2009, 05:32:41 PM
all the files including the rail engine must be in the same directory as where your copy of easyuo resides.
Title: Re: ScriptUO Heartwood Quester 1.21 with Advanced CLAw support
Post by: Hollywood_Shono on February 23, 2009, 05:34:08 PM
all the files including the rail engine must be in the same directory as where your copy of easyuo resides.

Nevermind didnt find it.... Everything is the same folded easyuo all my scripts etc... in the same folder... it saying i need the RailEngine.txt for it to run
Title: Re: ScriptUO Heartwood Quester 1.21 with Advanced CLAw support
Post by: Hollywood_Shono on February 23, 2009, 05:37:11 PM
I saw massare looking for it to you, you said to go here: http://www.scriptuo.com/?topic=16.0  i dont see anything to download
Title: Re: ScriptUO Heartwood Quester 1.21 with Advanced CLAw support
Post by: TrailMyx on February 23, 2009, 05:41:19 PM
This is the link you need:

http://www.scriptuo.com/index.php?action=dlattach;topic=16.0;attach=6

Edit: The links will be messed up for a few days after the site move.  As we find the errant links, I'll fix them.
Title: Re: ScriptUO Heartwood Quester 1.21 with Advanced CLAw support
Post by: Hollywood_Shono on February 23, 2009, 06:44:41 PM
Okay script works great right now...  but i have one problem... it does everything put wood on the beetle... gates to heartwood. walks down to the guy does the quest a bunch of times, gates to the house, gets more wood then I get this MSG: Waypoint of 0 of Rail HW_TRINKET is out of range from character location?
Title: Re: ScriptUO Heartwood Quester 1.21 with Advanced CLAw support
Post by: TrailMyx on February 23, 2009, 06:50:35 PM
Seems like it didn't gate back.  You can't be surfing/using your computer during the script running process.  Give it another try.  To be honest, I've never run this using gating.  You might be on your own in this debugging process.  My crafter has 11 INT.  :)
Title: Re: ScriptUO Heartwood Quester 1.21 with Advanced CLAw support
Post by: Hollywood_Shono on February 23, 2009, 07:07:21 PM
Seems like it didn't gate back.  You can't be surfing/using your computer during the script running process.  Give it another try.  To be honest, I've never run this using gating.  You might be on your own in this debugging process.  My crafter has 11 INT.  :)

yeah i ran it 5 times... it doesnt gate back to it for some reason do u think my rune spot could be to close to the secure i dont know why that would effect it though
Title: Re: ScriptUO Heartwood Quester 1.21 with Advanced CLAw support
Post by: TrailMyx on February 23, 2009, 07:15:00 PM
Not sure, you'll have to play around with it a bit I guess.  The runebook gump can cause some people problems too.  Actually gumps of all styles anymore.
Title: Re: ScriptUO Heartwood Quester 1.21 with Advanced CLAw support
Post by: Hollywood_Shono on February 25, 2009, 10:41:27 AM
I fixed my previous problem, Some reason me being right next to my secure container at my house it was some how messing it up for me it wouldn't gate back to heartwood i remarked it 1 step from the secure so it was still reachable and the script went smoothly I have one suggestion though... 


TM: If you could rail this script down to Ciala The Arborist.

There is a bug where if you get:

The quest down in heart wood:
Glassy Foe - Ryal
Dust to Dust -  Aniel
Circle of Life - Mielani

The people are listed beside the quest name: But If you receive these three quests then go to Ciala you will get the Arch Support quest every time, which would make this run much faster and there would be no scrolling through the quest. It would be done in 5 min instead of around 10 or so. Just my suggestion thats how my previous heartwood script works.
Title: Re: ScriptUO Heartwood Quester 1.21 with Advanced CLAw support
Post by: TrailMyx on February 25, 2009, 11:27:41 AM
Check this link:

http://www.scriptuo.com/index.php?topic=945.0

This is a rail down there.  I have been crafting down there for years.  ;)

Only recently did I realize there was a benefit for it.  (thanks to papa)

And really it's not a bug.  It makes sense for the "system" to not offer you a quest you already have.  It's just taking advantage of the dynamics of the game.  I don't know how may people remember the random world gates based on the phases of the moon.  Now you get to select where you want to go.  Same principle really.
Title: Re: ScriptUO Heartwood Quester 1.21 with Advanced CLAw support
Post by: Hollywood_Shono on February 25, 2009, 12:14:54 PM
Well yeah i m just saying if the script was set up for doing that it would prolly be done in half the time. Im guessing just remove the old one and change the name
Title: Re: ScriptUO Heartwood Quester 1.21 with Advanced CLAw support
Post by: elmagico on February 25, 2009, 12:48:39 PM
Looks great i wil try it THanks
Title: Re: ScriptUO Heartwood Quester 1.21 with Advanced CLAw support
Post by: Hollywood_Shono on February 25, 2009, 02:35:03 PM
Check this link:

http://www.scriptuo.com/index.php?topic=945.0

This is a rail down there.  I have been crafting down there for years.  ;)

Only recently did I realize there was a benefit for it.  (thanks to papa)

And really it's not a bug.  It makes sense for the "system" to not offer you a quest you already have.  It's just taking advantage of the dynamics of the game.  I don't know how may people remember the random world gates based on the phases of the moon.  Now you get to select where you want to go.  Same principle really.

Hi i install the rail changed the txt name to what the orginal was and it just says my rail get an error soon as i gate to heartwood
Title: Re: ScriptUO Heartwood Quester 1.21 with Advanced CLAw support
Post by: TrailMyx on February 25, 2009, 04:21:21 PM
You have to locate the line that sets %label_trinket and change it to hw_newtrinket
Title: Re: ScriptUO Heartwood Quester 1.21 with Advanced CLAw support
Post by: Hollywood_Shono on February 26, 2009, 06:15:36 AM
You have to locate the line that sets %label_trinket and change it to hw_newtrinket


i changed everything its still using the other rail I changed all the Hw_trinkets to Hw_NewTrinket and all the labels like you said still nothing..
Title: Re: ScriptUO Heartwood Quester 1.21 with Advanced CLAw support
Post by: TrailMyx on February 26, 2009, 08:28:40 AM
Dunno man...
Title: Re: ScriptUO Heartwood Quester 1.21 with Advanced CLAw support
Post by: Hollywood_Shono on February 26, 2009, 03:59:13 PM
Emo maybe i can switch my other rail with this... ill play with it
Title: Re: ScriptUO Heartwood Quester 1.21 with Advanced CLAw support
Post by: TrailMyx on February 27, 2009, 02:06:53 AM
Since we're not really talking about this script anymore, I moved your discussion over to it's own thread in script debug:

http://www.scriptuo.com/index.php?topic=1003.msg8091#msg8091
Title: Re: ScriptUO Heartwood Quester 1.21 with Advanced CLAw support
Post by: Marlando on February 27, 2009, 05:40:08 PM
Well this looks very nice thanks for sharing it with us :)
Title: Re: ScriptUO Heartwood Quester 1.21 with Advanced CLAw support
Post by: TrailMyx on March 03, 2009, 10:45:21 AM
Posted version 1.22

New to version 1.22:

Note:

I will probably not be updating v1.16 any longer.  v1.22 does everything that 1.16 does, so it doesn't make sense for me to keep updating it.  We'll still support it, but just look for any further updates to come from this version.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Hollywood_Shono on March 03, 2009, 12:00:40 PM
Hell yeah bank use with this script would be ideal... specially for siege players that is cause we have to do in fell so its easy to follow some body. If its easy enough think you could add in a journal scann saying if your being attacked your character says Guards?

Be useful for a few im sure.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on March 03, 2009, 12:15:46 PM
Sounds like a wonderful personal addition... ;)

We're going to make you a script writer yet!
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Hollywood_Shono on March 03, 2009, 12:33:09 PM
Sounds like a wonderful personal addition... ;)

We're going to make you a script writer yet!

hehe.. Alright what do you recommend for me TM... if you knew nothing about scripting where would you start. You guys seem to be the best so teach me grandmaster scripter.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on March 03, 2009, 12:58:21 PM
You should just write a little script that runs at the same time.  It's an easy thing with my journal handler.  There's even some sample code there. 

http://www.scriptuo.com/index.php?topic=33.0

EDIT:

Just create a new post in the script debug section if you have any questions and we can work through it.
Title: Re: ScriptUO Heartwood Quester 1.21 with Advanced CLAw support
Post by: Ganesh89 on March 04, 2009, 10:01:00 AM
all the files including the rail engine must be in the same directory as where your copy of easyuo resides.

tx that was it :)
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: bendel on March 06, 2009, 03:42:10 AM
Hey TM your script is verry good.

All working perfectly but i have 2 little problem of lag with.

1. When he try to find the good quest simple bow its slow .
2. When he want to clic on Toggle Quest item, it take some time also :(

But verry nice work
Thanks :)
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Cerveza on March 06, 2009, 04:11:39 AM
1. When he try to find the good quest simple bow its slow .
2. When he want to clic on Toggle Quest item, it take some time also :(

How slow? Seconds? Minutes?
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: bendel on March 06, 2009, 04:25:46 AM
5-7 secondes
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Cerveza on March 06, 2009, 05:06:08 AM
So....

Is it 5-7 seconds of cycling through quests, or 5-7 seconds once the Simple Bow quest comes up?

The more descriptive you can be, the easier it is to help.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: bendel on March 06, 2009, 06:13:48 AM
5-7 seconds once the Simple Bow quest comes up
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: bendel on March 06, 2009, 07:18:07 AM
I'll try now on a other Computer, maybe this one is too old :)
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on March 06, 2009, 07:26:32 AM
Ya, tis the nature of the beast with OCR in EasyUO.  If you are using a computer that's a bit older, it will take some time.  Also, be sure you aren't running anything else in the background like file sharing, browsers etc.

For me, it takes perhaps a second once the Simple Bows quest comes up.  (But I have a spiffy new quad-core..) Overall, it takes about 32 seconds per quest.  I'll add that's faster than ANY other quester out there hands down.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: bendel on March 06, 2009, 09:02:09 AM
Aah, working fast with a good pc :)

Thanks for support


If i can add something for the script, Make an bip sound if a gm is talking to you, because when it make bow & toggle quest on bow, i have some spam text and sometime i can't see if the gm is talking to me :(

But all is perfect !:)
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on March 06, 2009, 09:19:07 AM
Well, there's a few GM detectors lurking around out there.  I have my own I use, but probably won't be releasing that one.  I definitely won't be building that into the script since it's pretty much a separate entity.  So just look around for something.  Basic GM detectors are actually pretty easy to write, but they can get complicated if you want them too.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Cerveza on March 06, 2009, 09:21:37 AM
The problem I see with GM detection is giving the user a false sense of security.

If you get caught running Hartwud while unattended, you say "oh well" and move on. If we were to put GM detection into the script then anyone ever caught would be in here YELLING AT US!!!! because they got caught.

So better to not include it.

If the user wants some type of GM detection, they should run another tab, like TM said.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: bendel on March 06, 2009, 10:17:54 AM
its verry strange, i got again the same problem :/
on a laptop asus dual core 4go de ram

check the video


Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Cerveza on March 06, 2009, 10:19:01 AM
I'll have to look later...  >:(
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on March 06, 2009, 10:24:41 AM
Dunno man, it's working great for me.  Just be sure don't have any other unnecessary processes running.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Cerveza on March 06, 2009, 10:28:05 AM
Whats your screen color quality set to?

Highest [32 bit] or Medium [16 bit]

Sounds kind of like your OCR isn't being recognized as quickly as it should...
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: bendel on March 06, 2009, 10:30:30 AM
Got an ATI HD 3470
 32 bit selected
1440 x 900
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on March 06, 2009, 10:30:32 AM
One other thing to make sure is the mouse cursor isn't on another gump.  If you are accidentally selecting another gump, then you have to wait for the gump timeout to occur.  Make sure your mouse is pointing to the ground somewhere.

Plus, we've found that laptops don't run this very well.  Sometimes they operate in lower power mode, so their CPU isn't running at 100%. 
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: bendel on March 06, 2009, 10:32:34 AM
My Cursor are on the black screen of out, and i don't do anything when the script is played .
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on March 06, 2009, 10:41:28 AM
Hmm, dunno.  I always avoid running scripts of any sort on laptops since you don't have alot of control over CPU utilization.  You might want to run your laptop in 100% mode although that still doesn't guarantee you are getting 100% CPU utilization.

Is there a good desktop you can try?
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: bendel on March 06, 2009, 10:54:45 AM
Thanks again, I put Power4Gear High performance on high and now its faster :)


Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on March 06, 2009, 10:57:16 AM
Thanks again, I put Power4Gear High performance on high and now its faster :)


Darn laptops!!  :)
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on March 06, 2009, 11:18:42 AM
Just be careful now that you don't melt your laptop.  Most aren't engineered to be run at 100% for full-duty cycle.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: bendel on March 06, 2009, 11:48:29 AM
I totally Hate systems like that the laptop only work on Vista & no drivers for XP. I tried to find a way for Drivers on linux but, the ATI are not verry compatible with so i can't do anything.
Linux is so cool for changing the performance on Laptops.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on March 06, 2009, 01:14:35 PM
That's one of the reasons I stick with Fedora/nVidia. They provide kernel support packages for nVidia cards via the Livna repo (now RPM Fusion).  For the last few releases, 3d support has been nearly effortless.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: bendel on March 07, 2009, 12:52:41 PM
I'm sorry to disturb you again with that, but i installed on a new computer XP Home Edition (PC : 7600gr nvidia 6300e dual core intel)
And got the same lag :(

I installed nothing on the computer except drivers, internet & uo.

I'm lost sorry :(
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on March 07, 2009, 12:55:15 PM
You'll just have to play with it.  I think you know what the various things are that you can play with.  There's limited things we can do with the script; it's going to be intensive since the OCR functions do take some time.  However you seem to have some extra issues.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Khameleon on March 07, 2009, 12:56:08 PM
how many rules do you have?
how many items are in the corpse or box you are trying to loot?
please send us a pic after you have tried to loot something.

sorry - is the quester laggy or is the CLAw Laggy?
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: bendel on March 07, 2009, 01:05:44 PM
I don't selected the option Bmitemeval &tm claw looter but its requiered when i start the Quester script.

When i pause the TM claw, the script is running without lag.

Whats wrong  with that ?

My screen :

(http://www.imagup.com/imgs/1236489042.html)
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on March 07, 2009, 01:11:07 PM
The CLAw kicks up the #LPC to 100.  If that's causing you an issue, I'd be surprised.  Another reason to get yourself a better computer.  ;)
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: bendel on March 07, 2009, 01:13:21 PM
Eerh, Intel Core 2 CPU  6300  | 1.86GHz + 2,00 Go RAM  + 7600GT Nvidia is not enough ?
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on March 07, 2009, 01:15:32 PM
Well, I was running a 4.4 AMD x2 4GB and 7600GT without an issue.  Your system is better than my last one.  So that's what's making me think that's something else is up with you.  Are you using Razor or UOA?

There was something I started at one time where the CLAw will shift to an #LPC of 10, but I didn't complete that.  Didn't really need to since it wasn't a problem with me.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: bendel on March 07, 2009, 01:19:43 PM
No, only UO & Easyuo.
All microsoft updates done, Drivers installed, resolution screen 1280x1024.

Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on March 07, 2009, 01:21:19 PM
Dunno man.  You might try and set that both EasyUO and UO have the same CPU affinity.  Intel doesn't handle that very smartly.  Otherwise, I'm at a loss; you'll just have to use BMEval.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Khameleon on March 07, 2009, 01:49:32 PM
eewwww, you said a naughty word... BMEval
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: crameep on March 08, 2009, 01:03:32 AM
Ok, just gave this a whilrl on the FS i play on with flething quests. Only needed a few tweaks.

1st was when it was opening beetle pack it was trying to release it so i changed

exevent popup %beetle

to

exevent popup %beetle 11

Second I had to add the Tinker tool type for my shard into the script.. easy enough to find.

3rd havent realy fixed yet but its not an issue, i dont need a rail. I can recall into heartwood. Would be nice if i could turn rails off :)

After that, the script is great. Thanks alot TrailMyx

Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on March 08, 2009, 01:35:04 AM
That's the nice thing about playing on a RunUO shard, the exevent popup actually works correctly.  On OSI shards, you can't issue things like:

Code: [Select]
exevent popup %beetle 11

You have to wait for the window to pop up and then perform an offset click manually.  Glad you got it going on your freeshard!

It's easy enough to turn off the railing by just commenting out the references to TM_RunRail.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: crameep on March 08, 2009, 09:12:42 AM
Hehe, this is proving more difficult than it looks right, I've just removed the rail parts from your travel subs, and now it wont recall when I clearly left the recall gosubs in there.

EDIT: I'm stupid sorry, removed rail vars from the crafting setup part. woops
but when trying Ingenious Archery part 3 the text on the quest menu that pops up is
Ingenious Archery, Part III

should it be %QUEST_Ingenious_Archery,_Part_III 21307596 and where does this number come from :)
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Cerveza on March 08, 2009, 09:49:37 AM
OCR
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: crameep on March 08, 2009, 09:54:16 AM
Got the number, still not sure on what to do the this comma, it passes up the quest every time.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on March 08, 2009, 10:43:06 AM
That's one of the reasons why we don't support the quester on freeshards.  The spelling of that particular gump is different vs. OSI, so the "magic number" computed will also be different.  The best thing I can tell you is to located the OCR handler in the quester and single step the computation routine to see what numbers are passed back, and when you get to the right quest selection, make a note of the resulting "magic number".  This will be the one you can use to select the quest for your particular shard.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: crameep on March 08, 2009, 06:04:03 PM
Way ahead of you buddy, got that already, but .. can I leave the text out? or do I use the comma? Not sure what to do on this side, I can do the legwork just asking for a little help :)
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on March 08, 2009, 07:45:50 PM
Ah, good deal.  You can name it whatever you want.  All you needed was that nember. :)
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: crameep on March 08, 2009, 08:00:17 PM
Ah, i thought that it searched for the string of text you put in ;(
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on March 08, 2009, 10:06:14 PM
Ah, i thought that it searched for the string of text you put in ;(

Nope nope.  It's just a variable.  All the needed information is included in that integer value that's returned.  Glad you figured it out; not many others will even take the time to think through "why" it works.  Kudos to ya!
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: crameep on March 09, 2009, 08:58:20 AM
Yeah, got it working, very well I might add, i just added some lines that spits out the "Magic Number" as event sysmessage. Simple enough
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Paulonius on March 10, 2009, 09:09:47 PM
Great script. I ran it through 10K boards and got a yew and an ash kit.  I wonder if I can play with the scroll checker variables and keep a few more scrolls?  I found the variable, just wonder what your thougts are on whether adding a few would screw up the cycle. 

Very impressive -- and the CLAw is really a work of art.

Nice work.

-P
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on March 10, 2009, 09:13:32 PM
Very impressive -- and the CLAw is really a work of art.

Just wait until you get your mitts on the CLAw FULL version.   Right now, the CLAw LITE is using only OR logic, but the FULL version can parse expressions with AND, OR, NOT and OMIT logic.  Talk about specific.  ;)
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Petkiller on March 11, 2009, 10:34:28 AM
It runs great for me, I noticed a lot(4 one night) of people using the default rail on Atlantic.  I didn't want to be one of them so I spent the time to make a new rail.  I am sure anyone who spends the time making making a new rail will figure out you still need to end up within dumping distance of the trash can(I think its 3 tiles or less).  The only problems I have had was when my runes got blocked, by someone camping at the heartwood gate, or getting killed by the invasion spawn.  I played around with the lethal dart quest but it is on a timer of about 2 mins unless you do any other heartwood quest. 
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Cerveza on March 11, 2009, 10:35:32 AM
It's good to hear that. Making your own adaptations make the script seem less Twinkle McNugget to people watching.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on March 11, 2009, 10:41:01 AM
It runs great for me, I noticed a lot(4 one night) of people using the default rail on Atlantic.  I didn't want to be one of them so I spent the time to make a new rail.  I am sure anyone who spends the time making making a new rail will figure out you still need to end up within dumping distance of the trash can(I think its 3 tiles or less).  The only problems I have had was when my runes got blocked, by someone camping at the heartwood gate, or getting killed by the invasion spawn.  I played around with the lethal dart quest but it is on a timer of about 2 mins unless you do any other heartwood quest. 

Ya, the lethal darts quest is one that everyone wants to do, but with that timer, it just doesn't make sense.  2 minutes for that vs. 32 seconds for the carpentry quest.  If you are out for kits, then it makes NOOOO sense to make darts unless you have a matchbox for a wood pile.  lol

Anyhow, I agree with Cerveza and congratulate you for the initiative.  It drives me nuts to walk into heartwood and find 6 bugs parked on the same spot.

If you look a bit deeper into the script, since it uses my Runebook subs, you can have a range of runes to use to get into heartwood.  ;)  A hint for the enlightened.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Paulonius on March 11, 2009, 11:12:16 AM
Pet killer, I was one of the four of us last night on Atlantic. I was walking off of the end of the rail from time to time and I watched it run for 90% of my three or four runs.  I thought the same thing about the rail end point and will make a new rail as well.  I didn't have time today, so I put off doing the runs until I can finish looking over the code.

Can you confirm which side of the heartwood gate I should start the rail from?  I was looking to see whether the rail starts on the Yew side of the gate or if the gate jump is built into the script.

I also looked over the thread for the previous version and there is some good info in there about coding in the different quests. My fletcher is not gm yet, so I am thinking of switching to the heavy crossbow quest. 


As I watched the quest selection I also wondered if it would speed things up to already have a couple of the quests you are not working on. I think it could put you in a loop if you pull them from the wrong NPC, so it might not be worth doing.

Fun stuff. Thanks again TM!!!
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on March 11, 2009, 11:26:11 AM
definitely the south side.  If you do a custom rail that doesn't have a 1st waypoint, then you don't need to worry about where you need to put your rune location.  The basic rail has a waypoint outside (and right to the south of the gate), so that's why you are required to have your rune to the south.  Actually, the other rail I posted doesn't have that 1st waypoint, so that rail works N,S,E and W.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: crameep on March 11, 2009, 04:16:59 PM
Still got it going great on this shard TrailMyx, but There's usually what looks like 3-4 more people running this same script at a time (with rails) when on this shard you can actually recall to the spot you want. :) I was instantly jailed the first time i started using.. GM runing it watching me? I reamed him since EUO is legal on this shard aside from afk Resource gathering, i was clearly not afk (yet). And, we had a debate weather I was gathering resources or using them. I burnt through about 10k wood, so I argued that I was using. Ended up geting out of jail. But with a warning, not to do it again. There are still others there doing it who never seem to get jailed, so I have been working up something to detect when I'm being called upon by a GM, or moved to  jail. This should eliminate my problem.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on March 11, 2009, 04:29:09 PM
Well, Kits/Saws are a resource, no?  Consumable=resource.  lol
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: crameep on March 11, 2009, 07:19:07 PM
:) I know, I know, was just making a point hehe.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Sparta05 on March 16, 2009, 08:46:54 PM
thanks guys keep up the good work, i am going to test if this will work on my free shard i play on :)
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on March 16, 2009, 08:55:35 PM
thanks guys keep up the good work, i am going to test if this will work on my free shard i play on :)

Remember that you are pretty much on your own with Freeshards....  Good luck otherwise.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TomAlek on March 17, 2009, 08:48:38 AM
Hey! I run this script on EasyUO 1.46 and i click START but nothing happens! SAVE,LOAD,SETUP,START are frozen!
Can somebody help me? :)
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Cerveza on March 17, 2009, 09:23:27 AM
Hey! I run this script on EasyUO 1.46 and i click START but nothing happens! SAVE,LOAD,SETUP,START are frozen!
Can somebody help me? :)

Well there you go. Lots of script functions are 1.5 ONLY.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on March 17, 2009, 11:32:33 AM

Well there you go. Lots of script functions are 1.5 ONLY.

And I'd go so far as to say that EVERY script found on this site requires EasyUO 1.5.  Otherwise people won't have their precious REPEAT/UNTILS and WHILES.  :p
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TomAlek on March 18, 2009, 01:11:48 AM
So i use EUO 1.5 Version 148 but still frozen :( It say beforce run "TM_CLAW HAS NOT BEEN INITIALIZED, DO YOU WISH TO PROCEED WITH BMEVAL" i click Yes and START etc. are frozen ;<
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Khameleon on March 18, 2009, 01:13:36 AM
not to mention exevent macro's.. remember back in the day, when you wanted to drop on a back pack you had to find the the FindMod!, oh the good ole days!

updating every script to work with the new ContKind id's!  boy I'm glad this program has evolved
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Khameleon on March 18, 2009, 01:15:44 AM
So i use EUO 1.5 Version 148 but still frozen :( It say beforce run "TM_CLAW HAS NOT BEEN INITIALIZED, DO YOU WISH TO PROCEED WITH BMEVAL" i click Yes and START etc. are frozen ;<

well... did you start this Script (http://www.scriptuo.com/index.php?topic=17.0) First? then run the quester.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TomAlek on March 18, 2009, 01:18:02 AM
Sorry im not good in english.
Can somebody tell me what i need to do?
Im playing on RAZOR, i think that's problem but how to start WITHOUT razor on freeshard?
Shard: server.fantasyrealms.eu/2593
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on March 18, 2009, 01:35:55 AM
I have to say again that you are on your own regarding use of this script on a freeshard.

We just don't support it for anything other than EA/OSI.  Just about every freeshard implementation of ML is different, so it's just impossible to support it.  If you'd like to try and solicit help regarding this script for your specific freeshard, you might try posting in the freeshard section and perhaps someone who plays your shard might help you.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TomAlek on March 18, 2009, 01:53:15 AM
Heh so I must use faking macros ;P
Thanks for help.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: crameep on March 18, 2009, 12:18:48 PM
What is a faking macro?
Title: Re: ScriptUO Heartwood Quester 1.21 with Advanced CLAw support
Post by: Hollywood_Shono on March 23, 2009, 05:58:11 AM
You have to locate the line that sets %label_trinket and change it to hw_newtrinket

i've changed this and played with it and asked friends i still cant get this rail to work... i just gate a rail failure error soon as he gates to heartwood........... I do not understand :(

i even copy and pasted the new trail under the old railed document hopen that would work and it sitll failed
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Cerveza on March 23, 2009, 06:08:04 AM
Go back to page 1 of these posts. Follow ALL the instructions there. Once that is done, run everything. Then come back here and post a reply with what exactly happened. Not "it doesn't work" but a detailed explanation of what you did to set up the script and what occurred when it failed.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Hollywood_Shono on March 23, 2009, 06:14:23 AM
Running it normally runs fine... But he has another rail written to go further down to to the other heartwood saw person which I'd like to use. But just cant get to work here it is..

Okay what I am trying to do is use TM's other rail script that goes down to heartwood to do the carpentry quest.... He gave me the link which is on page to. Told me to put that in the folder. He then says "You have to locate the line that sets %label_trinket and change it to hw_newtrinket"

Which i have done now when i run the script he gates to outside of heartwood and gets a rail fail error pop up on his screen.

now i've played with this changed changed reinstalled it done it over and over again...
Then I thought oh well maybe if i just copy and paste the new rail into the old rail change the Hw_Trinket to Hw_NewTrinket it may work but it didnt it just went to the old rail some how sitll.... all I am trying to do is make it so teh rail go to Cialia The Harbormist instead of the other one....
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Cerveza on March 23, 2009, 06:34:59 AM
I think I remember mention of where your landing spot is for your recall to the Heartwood gate... search back through here and see if you can find it.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Hollywood_Shono on March 23, 2009, 06:49:10 AM
What does my landing spot have to do with it?

It gates a few steps west of teh heartwood gate like normal. The Regular HW_Trinket script works... it walks into heartwood accepts the quests tu rns it in etc.....


I am trying use TM other HW_Newtrinket script which goes to a differnt npc to do the quest. Basically I've changed everything TM said to do but it fails to recognize it so it just stops after gating at the heartwood entrance......

I just need someone else to test this to see if they are having the same problem or its just me that is doing something wrong.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Cerveza on March 23, 2009, 07:02:50 AM
i just gate a rail failure error soon as he gates to heartwood.......

What does my landing spot have to do with it?

Perhaps I don't fully understand where your failure is occurring. You first mentioned "i just gate a rail failure error soon as he gates to heardwood" which leads me to believe your error is occurring outside Heartwood prior to taking the gate in.

Now you say "what does my landing spot have to do with it?" and you mention the regular rail works fine. Well it is a different rail, so it might need a different landing spot to begin.

Again, please just answer this simple question.... You recall to the Heartwood gate, and what happens? Do you actually move to the Heartwood entrance gate and go down to heartwood? Or does it just freeze up at your landing spot?

BTW, it's impossible to know tones in posts, but this statement "What does my landing spot have to do with it?" kind of strikes me as an abusive tone. Is it?
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Hollywood_Shono on March 23, 2009, 07:33:47 AM
i just gate a rail failure error soon as he gates to heartwood.......

What does my landing spot have to do with it?

Perhaps I don't fully understand where your failure is occurring. You first mentioned "i just gate a rail failure error soon as he gates to heardwood" which leads me to believe your error is occurring outside Heartwood prior to taking the gate in.

Now you say "what does my landing spot have to do with it?" and you mention the regular rail works fine. Well it is a different rail, so it might need a different landing spot to begin.

Again, please just answer this simple question.... You recall to the Heartwood gate, and what happens? Do you actually move to the Heartwood entrance gate and go down to heartwood? Or does it just freeze up at your landing spot?

BTW, it's impossible to know tones in posts, but this statement "What does my landing spot have to do with it?" kind of strikes me as an abusive tone. Is it?

No, no no abusive tone. Sorry to make it sound like that just agervating alright. If I run the current scripts that are posted it runs perfectly fine.... Sets the secure, Gates To Entrance, Goes Down There, Does The Quest, Returns, Rinse Repeat...


But i asked Tm about another railing going to Ciala The Arbormist he said he had a script already written for that but it wasnt added to this version. The link is here:

http://www.scriptuo.com/index.php?topic=945.0


What he told me to make it work was to  locate the line that sets %label_trinket and change it to hw_newtrinket

Which I believe I have done. So Now when I Run this script... everything works except it goes to the heartwood entrance and imeditally gets the error Rail Fail pops up and stop the script from worken..

Are you saying I should make my rune spot farther back that could screwing it up... I figured it it did work and that was the case he would just run past the entrance or to a differnt spot which would make sense about the land marking... So my question is if you can test this for me and see if you can get it to work maybe im missing a label change in it I dont know i've looked through the whole thing and still get the issue.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Cerveza on March 23, 2009, 08:36:25 AM
Unfortunately, I can't test it from here.

The failure is at the outer gate to Heartwood, then it seems to be an actual rail issue. To test the landing spot, just mark a different rune to the opposite side of the Heartwood gate and see if you get the exact same thing.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on March 23, 2009, 09:44:13 AM
Well, there's on big problem.  It still should work for you, though.  the original additional rail I posted was the wrong one.  I just can't imagine that anyone didn't let me know about that.  It works, but doesn't take you down to the other area.  This posted one is better because it doesn't require you to be south of the "sparkle".

I will add this other rail to the post.

Specifically, you need to change your code to look like the following (starting at line 93):

Code: [Select]
if %use_custom_rails = #FALSE
{
  set %railbowcraft hw_bowcraft.txt  ; label = hw_bowcraft index=0
  set %railtrinket hw_trinket2.txt    ; label = hw_trinket  index=1
  set %label_bowcraft hw_bowcraft
  set %label_trinket hw_trinket_2
}

Note the changes to %railtrinket and %label_trinket.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Hollywood_Shono on March 23, 2009, 10:05:17 AM
Well, there's on big problem.  It still should work for you, though.  the original additional rail I posted was the wrong one.  I just can't imagine that anyone didn't let me know about that.  It works, but doesn't take you down to the other area.  This posted one is better because it doesn't require you to be south of the "sparkle".

I will add this other rail to the post.

Specifically, you need to change your code to look like the following (starting at line 93):

Code: [Select]
if %use_custom_rails = #FALSE
{
  set %railbowcraft hw_bowcraft.txt  ; label = hw_bowcraft index=0
  set %railtrinket hw_trinket2.txt    ; label = hw_trinket  index=1
  set %label_bowcraft hw_bowcraft
  set %label_trinket hw_trinket_2
}

Note the changes to %railtrinket and %label_trinket.

Okay so if i change what yout saying on line 93....

Do I also change all the %label_Trinket to %label_Hw_Newtrinket...          let me know what i need to do please or if you could just change the main downloads to use this rail it be easier for everyone I would think either way inform me of what needs to be done again sorry to be confused.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on March 23, 2009, 10:15:31 AM
make you section starting at line 93 look like what i posted.  you will be changing 2 lines.  best is just to past over the same section with what i posted.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Hollywood_Shono on March 23, 2009, 03:35:19 PM
make you section starting at line 93 look like what i posted.  you will be changing 2 lines.  best is just to past over the same section with what i posted.

Do i delate the first hw_Trinket that came with the script and just the the Hw_newtrinket in the folder is what im asking do i have to change all the name or just change line 93 with what you previously posted
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on March 23, 2009, 04:47:44 PM
just make sure you have copied the rail to the same location as the other ones.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Hollywood_Shono on March 24, 2009, 09:33:13 AM
just make sure you have copied the rail to the same location as the other ones.


What do you mean by this TM? Make sure I have copied the rail to the same location as the otehr ones. Can you give me an example please. Im just confused I changed the line 93. to what you wanted it. I have the new rail you had gave me with that link. Now what am I doing from their?
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Hollywood_Shono on March 24, 2009, 09:37:34 AM
Ahh i see you added a new rail to the old link okay im going to try that

my one other question is how can i go about changing the entrance to heartwood... so I can run multiple clients going into there... Right now there right into each others gates and its getting screwed up if i try and run two at a time?

Can you teach me how to change the cordinates so instead of entering the west side it goes in the east side etc..
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Hollywood_Shono on March 24, 2009, 09:44:58 AM
Okay your rail acutally goes around instead of straight there. So that works one problem its trying to click Aniel to get the quest I need to it go click Ciala. How do i change the npc id or where is it located in the script?
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on March 24, 2009, 09:58:11 AM
Hollywood, you've got some pretty specific requirements, and I really think you just need to keep working at it an figure it out yourself.  You just have to look at the script and you'll get your questions answered.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on March 24, 2009, 10:19:13 AM
Here's a hint for the vendor thing.  Investigate what you might need to change this line to:

Quote
set %vendortype trinket , #spc , weaver$arborist$
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Hollywood_Shono on March 24, 2009, 11:54:32 AM
Here's a hint for the vendor thing.  Investigate what you might need to change this line to:

Quote
set %vendortype trinket , #spc , weaver$arborist$


TM thats acutally the exact line i've been looking at... I found the Property for Ciala the$Arbormist i didnt weather to copy that property into were it says weaver$arborist$ .........orr the #spc is that acutally id Number of the vendor.... If so How do I get the right ID Number i tried doing last target on Cialia but that didnt give me it....  Im guessing weaver$arborist$ is just looking for the arborist and the SPC is there ID.... could you tell me at least where in easyuo I would find the ID then i can try and search up how to get that id to show up for Cialia...

Thanks for the help.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on March 24, 2009, 12:08:30 PM
This script doesn't use IDs, it looks for the name and determines the id.    Things you have to ask yourself is:

"What's that #SPC thingy anyhow and why is TM using it?"

and how do I make "Cialia the trinket weaver" compatible with EUO, especially when the clue you're looking for is included in the line already there:

Code: [Select]
set %vendortype trinket , #spc , weaver$arborist$

I'm going to make you figure this one out.....
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Hollywood_Shono on March 24, 2009, 01:29:57 PM
This script doesn't use IDs, it looks for the name and determines the id.    Things you have to ask yourself is:

"What's that #SPC thingy anyhow and why is TM using it?"

and how do I make "Cialia the trinket weaver" compatible with EUO, especially when the clue you're looking for is included in the line already there:

Code: [Select]
set %vendortype trinket , #spc , weaver$arborist$

I'm going to make you figure this one out.....

Okay found out #spc is a constant that represents teh space on on your keyboard or in the code....

I found out that the vendor Ciala isn't a trinket weaver... its just an arborist.. so im guessing i just change the it to set %vendortype arborist, #spc , weaver$arborist$


Buy then it still doesnt know weaither to go to Ciala or Aniel since they are both arborists
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on March 24, 2009, 01:55:08 PM


Buy then it still doesnt know weaither to go to Ciala or Aniel since they are both arborists


But what happens when you describe her full name and title while using #SPC for spaces?  :)

Think about what her name is and what she does and compare it to the way the script is already written.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Hollywood_Shono on March 24, 2009, 02:13:50 PM


Buy then it still doesnt know weaither to go to Ciala or Aniel since they are both arborists


But what happens when you describe her full name and title while using #SPC for spaces?  :)

Think about what her name is and what she does and compare it to the way the script is already written.

I tried that

set %vendortype Ciala #spc the #spc arborist , #spc , weaver$arborist$

and it said vendor can not be found so then i went
set %vendortype Ciala #spc , the #spc , arborist , #spc , weaver$arborist$

Same msg so im gona try it all one word see what happens..

tried set %vendortype Ciala #spc, weaver$arborist$

set %vendortype Ciala#spcthe#spcarborist , #spc , weaver$arborist$ of course that one failed i expected....

trying set %vendortype arborist , #spc , weaver$arborist$ see if that works

Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Hollywood_Shono on March 24, 2009, 02:24:01 PM


Buy then it still doesnt know weaither to go to Ciala or Aniel since they are both arborists


But what happens when you describe her full name and title while using #SPC for spaces?  :)

Think about what her name is and what she does and compare it to the way the script is already written.

Her is Ciala she is the Arborist  umm The script looks for weavers and arborists...
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Hollywood_Shono on March 24, 2009, 02:27:31 PM


Buy then it still doesnt know weaither to go to Ciala or Aniel since they are both arborists


But what happens when you describe her full name and title while using #SPC for spaces?  :)

Think about what her name is and what she does and compare it to the way the script is already written.

Her is Ciala she is the Arborist  umm The script looks for weavers and arborists...

wait is it! Ciala #Spc , Trinket #spc ,!? *Failed*
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on March 24, 2009, 02:34:42 PM
Well, there's a couple ways to approach it.  Right now the script is looking for all Weavers *AND* all Arborists.  What happens if you just get rid of the offending one? (i.e. separated by "$")

I'm trying to get you to look at the code and see how that actually works.  Once you realize that these scripts aren't powered by magic is when you'll realize you can actually tweak them to do your own bidding.

Just have to think about it a little bit.  I'm not gonna give you the answer. 
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Hollywood_Shono on March 24, 2009, 02:38:43 PM
Well, there's a couple ways to approach it.  Right now the script is looking for all Weavers *AND* all Arborists.  What happens if you just get rid of the offending one? (i.e. separated by "$")

I'm trying to get you to look at the code and see how that actually works.  Once you realize that these scripts aren't powered by magic is when you'll realize you can actually tweak them to do your own bidding.

Im trying i really am i've been screwing with it over and over...

I tried doing it this way  Set %vendortype trinket , #spc , Ciala , #spc the , #spc arborist , #spc , weaver$arborist

So are you saying just go  Set %vendortype trinket Ciala$     or Set %vendortype trinket , #spc , Ciala , #spc the , #spc Arborist
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on March 24, 2009, 02:39:00 PM
Also, before you start just trying things to see if they work, you might try to understand what the comma operator is doing, and how you are building a string.  Try to convince yourself that:

this is a test
is the same as
this , #SPC , is , #SPC , a , #SPC , test

and that
this is a test
is NOT the same as
this is , #SPC , a test.

(EUO speaking that is.)
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on March 24, 2009, 02:40:56 PM

So are you saying just go  Set %vendortype trinket Ciala$     or Set %vendortype trinket , #spc , Ciala , #spc the , #spc Arborist

What I'm saying is take a look at the function that is utilizing the value contained within %vendortype and try to understand what the function is doing.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Hollywood_Shono on March 24, 2009, 02:43:21 PM
Well, there's a couple ways to approach it.  Right now the script is looking for all Weavers *AND* all Arborists.  What happens if you just get rid of the offending one? (i.e. separated by "$")

I'm trying to get you to look at the code and see how that actually works.  Once you realize that these scripts aren't powered by magic is when you'll realize you can actually tweak them to do your own bidding.

Just have to think about it a little bit.  I'm not gonna give you the answer. 

If i just run set %vendortype trinket , #spc , arborist$

it fails to find any vendor
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Hollywood_Shono on March 24, 2009, 02:45:40 PM

So are you saying just go  Set %vendortype trinket Ciala$     or Set %vendortype trinket , #spc , Ciala , #spc the , #spc Arborist

What I'm saying is take a look at the function that is utilizing the value contained within %vendortype and try to understand what the function is doing.
'


%vendortype is determining the type of vendor that you are trying to look for right?
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on March 24, 2009, 02:47:23 PM

If i just run set %vendortype trinket , #spc , arborist$

it fails to find any vendor

Think for a second.....

Is there any object around you that's named "trinket arborist"?  I don't think so.  I don't think there's anything with that in the title anywhere....

Remember that
trinket , #spc , arborist
is equal to
trinket arborist
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Hollywood_Shono on March 24, 2009, 02:51:22 PM

If i just run set %vendortype trinket , #spc , arborist$

it fails to find any vendor

Think for a second.....

Is there any object around you that's named "trinket arborist"?  I don't think so.  I don't think there's anything with that in the title anywhere....

Remember that
trinket , #spc , arborist
is equal to
trinket arborist


So your saying put Ciala , #spc , arborist and it will only look for Ciala but because it was set to Trinket , #spc , weaver$arborist$ it was finding the nearest one npc that was an arborist or weaver?



Goddd dammmit this is so simple and i cant figure it out...


Wouldn't it be....

set %vendortype Ciala , #spc , the , #spc , arborist

Meaning The Vendor Type should be set to Ciala The Arborist ?
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on March 24, 2009, 03:00:03 PM
Again it comes down to what you want to do with the script.  And that you really need to understand what the subroutine findvendor is doing.  Here's another hint....

The script is setup to look for *2* different kinds of venders(arguments separated by "$" in the variable %vendortype), Trinket weavers AND arborists.  What happens if you only want to look for one type?

Again, this is all in the code, there's no magic in what findvendor is doing. 

But really this sub can be used to locate anything with a specific text. You just have to specify the text correctly.  And for that you have to understand how strings are "strung" together in EasyUO.

I'm sorry this is painful for you, but it's pretty important for you to know how these work.  When that happens you can learn how to do these yourself, and perhaps help me answer all these questions in the future.  ;)
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on March 24, 2009, 03:03:34 PM

set %vendortype Ciala , #spc , the , #spc , arborist

Meaning The Vendor Type should be set to Ciala The Arborist ?

If this value is found somewhere in the text of the item you are looking for then you are very close.  However, you seem to be missing an important character *cough-$* at the end of the text.  Again, if you look at findvendor you'll see it relies on this character to be able to see how many different things you are trying to search for.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Hollywood_Shono on March 24, 2009, 03:20:32 PM
Again it comes down to what you want to do with the script.  And that you really need to understand what the subroutine findvendor is doing.  Here's another hint....

The script is setup to look for *2* different kinds of venders(arguments separated by "$" in the variable %vendortype), Trinket weavers AND arborists.  What happens if you only want to look for one type?

Again, this is all in the code, there's no magic in what findvendor is doing. 

But really this sub can be used to locate anything with a specific text. You just have to specify the text correctly.  And for that you have to understand how strings are "strung" together in EasyUO.

I'm sorry this is painful for you, but it's pretty important for you to know how these work.  When that happens you can learn how to do these yourself, and perhaps help me answer all these questions in the future.  ;)

TM this is driving me f'en crazy i've added things removed thinkgs i got rid of the weavers its stiill finding the other arbormist if i remove teh trinket and it doesnt find any vendor if i add any names it doesnt find any vendors I add the full name it doenst do anything what the hell i do it doesnt work i cant stand it i know its something fricken simple
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Hollywood_Shono on March 24, 2009, 03:25:01 PM
set %vendortype Ciala , #spc , the , #spc , arborist$

I did that and still says vendor cant be located..
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on March 24, 2009, 03:30:03 PM
Have you tried to transfer the quests to the other one?  That just might be easier..
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Hollywood_Shono on March 24, 2009, 03:37:50 PM
Have you tried to transfer the quests to the other one?  That just might be easier..

Well way too torcher me you big meanie but that means i didnt learn anything! I still want to know how i go about doing it...
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on March 24, 2009, 03:44:55 PM
Lol, well you mostly had it by making sure you were looking for just the specific one, either arbotist$ or trinket, #SPC , weaver$ and making sure the text you had in the variable appears EXACTLY like it does in the item/vendor description.

*shrugs*

So something else it up, and that can be due to mis-spelling, vendor out of range, or any one of a whole host of things.  Since I can't see your setup, you just have to shift to what you know that works and use that instead.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: koski1977 on March 27, 2009, 06:15:23 AM
This is quite possibly the awesomest thing ever, thanks TM!!! :D
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Petkiller on March 30, 2009, 06:06:09 AM
I tried to set up the heartwood quester for lethal darts because a friend of mine has 20k of bolts to waste.  I tried and tried but it would just cycle through the quest without stopping on lethal darts.  I then gave him the old craftamatic script(just had to change item id from darts to bolts) but his backpack filled up with shatchels in bout an 2 hours.  I "borrowed" part of heartwood quester that looked for runics kits in the shatchels and then dumped them in the trash.  He has used bout 4k of bolts so far and has recieved 1 oak 2 ash and 1 yew kit.  The good part is 4k of bolts will last him almost 13 hours and he can stay hidden and not have a bug visable.  I wasted bout 1k of bolts testing the script and only ended up with an oak kit.  Here is what I included into the craftmatic script:

 wait 50
  finditem ZJF C_ , #BACKPACKID
  if #findkind <> -1
  {
      wait 20
      set %bag #findid
      set #lobjectid %bag
      event macro 17
      wait 40
      finditem ZFG C_ , %bag
      set %kit #findid
      exevent drag %kit 1
      wait 20
      exevent dropc #backpackid
      wait 20
      finditem UFG C_ , %bag
      set %kit #findid
      exevent drag %kit 1
      wait 20
      exevent dropc #backpackid
      wait 20
  }
  finditem JKF G_3
  set %trash #findid
  set #lobjectid %trash
  event macro 17
  wait 20
  finditem ZJF C_ , #backpackid
     set #lobjectid %bag
     exevent drag %bag
     wait 20
     exevent dropc %trash
wait 50
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: dennislcf on April 05, 2009, 07:11:12 PM
TM. it looks good n i'll try it....thank you for your script
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: koski1977 on April 08, 2009, 11:31:01 AM
I installed this script and used it for a bit, then it got hung up on a bow quest (for crossbows) and for some reason after this initial time ( I didn't change anything within the script, as I know 0 about scripting) it wont work?

Any Ideas why?

Brilliant script though, if I can get it to work for me it will be awesome!! :)
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on April 08, 2009, 11:31:53 AM
What's "hung up" mean?
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: koski1977 on April 08, 2009, 11:39:31 AM
It gets stuck on the crossbow quest and I click on the 'close' repeatedly and it won't close, so I endup having to kill the client.

Another question, off topic of that though.  When my character recals from home to the heartwood, is there a way i can set up the script so they don't mount the beetle?  Found that it was just not working (1600 +character weight)

Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on April 08, 2009, 11:44:22 AM
It gets stuck on the crossbow quest and I click on the 'close' repeatedly and it won't close, so I endup having to kill the client.

Remember this script only does the "Simple Bow" quest, so it should be making bows and not crossbows.  Have you edited it?

Another question, off topic of that though.  When my character recals from home to the heartwood, is there a way i can set up the script so they don't mount the beetle?  Found that it was just not working (1600 +character weight)

I wouldn't do that.....  The pathfinding function doesn't do anything to wrangle a beetle in tow.  You'll loose the beetle and the script won't work.  You must be trying to use your  computer at the same time and you can't run with a mounted/loaded beetle.  We just don't support that and won't.  That's why we recommend dedicating the computer to the script, or simply run the script in a virtual machine where you can isolate your mouse from the host OS.  In a VM, I can actually minimize the VM window.  ;)
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: koski1977 on April 08, 2009, 11:47:07 AM
That was the odd part, I didn't edit it.  After it did that, I uninstalled it, reinstalled and it did the same thing.  I will try again later tonight though.

And as far as the beetle, knowing me, I was trying to do somthing else, if nothing more than moving the mouse around looking at different packs on my character :P

Thanks for the help, I'll give it a whirl! : :)
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on April 08, 2009, 11:53:52 AM
I just ran the basic bare 1.22 and it's working dandy for me, shucking bows until my fingers are nubs.  Are you playing OSI?  Also remember you can't have the screen blocked by anything since it uses "OCR" to determine what the quest is.

I highly recommend you setting up a virtual machine if you do intend to do something else on your computer.  I have 4 Win2000 sessions running at times, and all of them minimized while I surf the web. 
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: koski1977 on April 08, 2009, 11:55:45 AM
Hehe, I know only the basics honestly.  I'm so uneducated in this, so, a couple questions.

What is OSI?  lol

And I'm not sure, but the Virtual Machine thing I have nooo clue how to set that up.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on April 08, 2009, 11:56:33 AM
So you're playing a freeshard? 
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: koski1977 on April 08, 2009, 11:58:53 AM
Oh god no, trust me, I pay for it :P dearly, lol
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on April 08, 2009, 12:02:13 PM
Ok, was about to make you read the first line of the check-list of the first post.  :p (well, in 1.16)
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Elite331 on April 16, 2009, 08:41:56 AM
Loving the quest, Although Im having an Issue I cant seem to correct,
Once it loots the specific items its going to loot, once I get back to my bank box
It tries to drop it into my loot bag in my bank, but it just bounces right back into my loot pack?

Doesnt seem to matter what bag I use it just doesnt seem to work? any ideas?
Also small side note, Arborist do i need to replace the labels or add them? to have my
script rail down to that person?
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on April 16, 2009, 08:53:03 AM
The loot pack must be in the main level of your bank.  Otherwise, you might want to re-setup your loot pack again through the guided setup.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Elite331 on April 16, 2009, 09:04:52 AM
Hmm, See I thought the same things, sorry i'll try to be more detailed with my trail and error...

It is in the main level, Like I said I have also tried other main packs ,and Also thought just perhaps I missclicked on guided setup so i Have indeed tried to redo the setup multiple times, still no luck.? any ideas...

(oh and perhaps a link for arborist reading material)
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on April 16, 2009, 09:11:03 AM
The only thing I can recommend is you verify there's a valid value stored in the variable that holds information about your secure container.  If there is a valid #FINDID, then I have no idea what's up.

You'll have to prowl through the thread again for the arborist mods.  I can't remember where those were.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Elite331 on April 16, 2009, 01:02:49 PM
this is what i have ..
gosub open_source %lootbag -1
  finditem * C_ , %lootbag
  if #FINDCNT > 0
  {

    for #FINDINDEX 1 #FINDCNT
      gosub DragItem #FINDID #FINDSTACK C %lootstorebag
  }
}
else
{
  gosub LocateBank
  if #RESULT <> #TRUE
  {
    gosub open_source %lootbag -1
    finditem * C_ , %lootbag
    if #FINDCNT > 0
    {
      for #FINDINDEX 1 #FINDCNT
        gosub DragItem #FINDID #FINDSTACK C %lootstorebag

I cant lie not entirely sure...but im pretty sure that looks right? unless im totally missing something
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on April 16, 2009, 01:14:00 PM
You should watch the value in %lootstorebag

Take a vardump (Tools/VarDump) and see if there's a valid value here.  If it's N/A, then it's not saving your particular bag.

It's working fine for me, so I'm not sure what you are doing differently.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Elite331 on April 16, 2009, 01:31:14 PM
Hmm,

So I have found that it does actually say N/A what type of bag are you using, I have tried multiple im not sure why it wont be reading any of them? If i manually change the N/A to an Id would that work, or do i need to toy with it untill the setup actually takes a holds the item id of the bag... Tricky little thing these scripts
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on April 16, 2009, 01:33:53 PM
Well, you can certainly set it by hand just to get you going.....

I just checked mine and I do have my specific loot bag there.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on April 16, 2009, 01:41:06 PM
Actually, I think you found a bug! 

Since I don't really run from the bank with this particular script, I didn't see this. 

Goto around like 230 and change this line:

Code: [Select]
gosub DragItem #FINDID #FINDSTACK C %lootstorebag

to this:


Code: [Select]
gosub DragItem #FINDID #FINDSTACK C %lootstorebag_bank

Good job finding that.

You should probably verify you have a valid value in the %lootstorebag_bank variable....
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Elite331 on April 16, 2009, 02:00:49 PM
So im running it right now to see, Although im looking at the script and even though I have changed that line it is still registering my loot bag as N/A so im not to sure if its going to work but ill let it run and try it out and see how it goes, otherwise i guess ill have to change it manually.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on April 16, 2009, 02:05:10 PM
Well there I can't help ya.  I'm kinda surprised nobody else griped about this particular bug since so many have downloaded this version now.  I guess everyone is still used to their secure container.

Also, you might want to save your setup after you do the guided setup.  Then restart the script and see if the value is still N/A
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Elite331 on April 16, 2009, 02:09:25 PM
Alright its still going! And I am so glad I could help lol! Makes me feel like im doing something to help actually!!
I will try that for sure once its done this round.... I know its a little off topic, but what do I have to do to fix the script to run to the Arbroist not the tinker...I  the files d/l'd just not sure how to make the script take the rail
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on April 16, 2009, 02:13:12 PM
You're going to have to do a bit of debugging since others have gotten it to work. 

Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Elite331 on April 16, 2009, 02:14:55 PM
Ok i'll do my best...
And just to let you know the script runs absolutely fine now with that small change, so just to let anyknow who wants to use a bank secure line 230 needs to be
gosub DragItem #FINDID #FINDSTACK C %lootstorebag_bank

Works like a charm! lol ty vm TM apprecaited.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: napalon on April 22, 2009, 01:46:11 PM
Im just made bowcrafter with 50 skill. I only get few bow guests and then npc stops giving em. Do i need to be gm to make this thing work? Thanks
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on April 22, 2009, 01:47:50 PM
You'll probably have to adjust the number of boards dragged from your beetle to your pack until you get your skill up.  This will cover the failures you are having.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: _C2_ on April 22, 2009, 01:48:36 PM
Im just made bowcrafter with 50 skill. I only get few bow guests and then npc stops giving em. Do i need to be gm to make this thing work? Thanks

are you using a trial acct.  there have been changes that only let you repeat the quest once now.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on April 22, 2009, 02:01:35 PM
Oh yeh, that's right.  It's pay to play now... ;)
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: napalon on April 22, 2009, 02:05:16 PM
ye that resolved problem obv :) Thanks for fast replys. What about the version. Should i use 1.22 or 1.16?
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on April 22, 2009, 02:10:04 PM
It's up to you really.  If you want to run from the bank, then 1.22 is the way to go.  Frankly, I won't be actively updating 1.16 anyhow, so it might be best to just get used to 1.22.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: napalon on April 22, 2009, 03:27:27 PM
oK after i get account up ill start making those bow quests. What about other quests? witch guest gives best chance to get heartwoods?
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on April 22, 2009, 03:37:42 PM
They are all the same.  Best thing you can do is to maximize your attempts/hr for better possibilities, or minimize the amount of time spent scrolling through the possible quests. 
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: yuchaldye on April 24, 2009, 01:00:03 AM
will this work with easyuo or just suo
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: UOMaddog on April 24, 2009, 06:10:20 AM
will this work with easyuo or just suo


All scripts on this site work with EUO. SUO is not technically "functional" for running scripts yet so it would be pointless to WRITE scripts for a non-functioning program (unless you're a severe overachiever).
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: summer on April 29, 2009, 11:12:49 PM
Is this the bowcrater quest script ?
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Khameleon on April 30, 2009, 01:26:18 AM
and capentry script
and tinker script
and..... ect.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Minus on May 03, 2009, 07:23:27 PM
I had it working today. Well i made it in and thru Heartwood and actully did some quest... But It keeps trying to make me run when my pet is maxed out on logs. I do not have always run on. I am running like 1440x1440 was wondering if that has something to do with it...
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on May 03, 2009, 07:32:06 PM
Make sure you don't have "always run" checked in your UO setup.  Also remember that you can't be using your computer when you use this script since using the mouse can mess up your loaded beetle.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: KilroyIsDead on May 04, 2009, 03:41:40 PM
not sure if there's an upper bound on stupid questions, but for the heartwood quester, do we just want normal boards? or are colored boards useful?
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on May 04, 2009, 03:46:58 PM
The script is configured to use normal boards, but you can change the hue of boards used in the setup of the script.  The color of boards has no effect on your likelihood to receive a kit/saw however.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: KilroyIsDead on May 04, 2009, 03:51:32 PM
well then it sounds silly to use hued boards.  I really started this script to try for a talisman.  Should I be doing fletch or carp?  Is there a UO guide for these quests? I have never done them before
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on May 04, 2009, 03:55:47 PM
Some people have a huge surplus of oak, so there is definite uses.  I had a few piles of 60K a while back, so it was nice to burn through it.

As for the quest, I would definitely suggest the footstools quest since there's fewer quests in the possible quest list, so you spend less time hunting for the correct quest, and more time actually performing the quest.  If you know the "trick", you can guarantee the selection of the quest each time.  ;)
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: KilroyIsDead on May 04, 2009, 04:03:32 PM
5 minutes in and I have an oak ruic ;)
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on May 04, 2009, 04:05:14 PM
Nice!  I'll do it all day and not get anything.  It's totally random.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: KilroyIsDead on May 04, 2009, 06:22:47 PM
and one hr later a heartwood runic
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on May 04, 2009, 06:27:52 PM
and one hr later a heartwood runic


YOU BASTARD!!!!!  (jk)

I have totally lost track of all the wood I've gone through.  I'd have to say that I'm nearly at 5M boards with only 3 heartwood kits to show for it. 

I remember my last setup file that track the performance (from the 2.0 quester) and after 9000 quest iterations, I received only 1 kit.  So hopefully you'll have more luck than I.  Sounds like you are off to a great start.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Khameleon on May 04, 2009, 07:14:18 PM
I remember when I first came back about a year ago...
I was introduced to heartwood... had no idea what a heartwood kit or yew was....  by hand I got a Heartwood kit.. I asked a guy that was also doing the quest.. though he must have been using the quester since he was standing next to the trash can, and non responsive.  later that day I sold it for 10 mill.. not a bad start for having a 2 4 year absence.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Hoby on May 11, 2009, 01:39:35 AM
Problem i am having is when i start the script it says 30rail.whatever not found.  Its in the same folder as  everything else is.  any ideas.  I can run 116 it doesnt give me that error. 
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on May 11, 2009, 09:05:00 AM
Just be sure to double check the name of the rail and what's called out in the script.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Fellers on May 15, 2009, 08:47:14 AM
Why was my post removed?
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on May 15, 2009, 09:49:00 AM
Sorry, I had to prune it to delete another.  But thanks for that thanks.  ;)
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: HamsterEU on May 19, 2009, 10:49:16 AM
Thanks for this and your great autolooter :)
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Khameleon on May 20, 2009, 05:27:42 PM
thats AutoLooter Lite :P
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Methyl on May 25, 2009, 12:16:31 PM
I want to use claw, but it seems really complicated..
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Khameleon on May 25, 2009, 01:55:32 PM
that is exactly the Opposite of the claw is about... the idea is to make looting easier.
everything is setup though the Menu, so there is absolutely no internal editing, which TM does a great job at making sure no one has to edit his scripts or change anything.  download it play around with it... you'll be surprised how fast you'll be setting up a loot list.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Blackie420 on May 25, 2009, 10:13:21 PM
im having a problem with the script choosing the quest it will go through the menu and will just keep going it wont choose one
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on May 25, 2009, 11:07:48 PM
Be sure to go through the checklist and also go through the 1.16 thread.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: coldi on May 26, 2009, 01:19:19 AM
Thanks
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Khameleon on May 26, 2009, 01:41:26 AM
Thanks

LOL good first post.  closes the door closes quickly
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Cerveza on May 26, 2009, 05:37:29 AM
Thanks

Your account has been placed into "restricted" status. There's very little you'll be allowed to do on ScriptUO.

This is probably a result of your first post being a request or comment instead of an introduction.

Please read the SITE RULES (http://www.scriptuo.com/index.php?board=55.0) which explains what we expect of you, and what you can expect from us here at ScriptUO.

Once you have complied with our rules here, we'll see about removing that restriction and allowing you access to one of the great UO Scripting communities anywhere.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Hoby on May 26, 2009, 06:22:57 PM
Heres my issue now.  Was working fine, now when i start it my toon dismounts his beetle and runs around spamming all follow me.  Any ideas? NM.  Think I figured it out.  My previous beelte disappeared and I just got a new one, guess i have to rerun the setup.  Thnks
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Khameleon on May 26, 2009, 08:08:19 PM
a good Observation :)
I have learned in the past if you are dismounted from your beetle for a long period of time, loose connection, and stay dismounted, while your pet is loaded it will disappear into the void.  I have had this so many times I can't keep count.  I have a character just holding blue bugs for me now.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Hoby on May 26, 2009, 08:22:08 PM
yea, been feeding my beetle daily.  Guess that didnt help.  Poof!!  Gone.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: minax6501 on May 27, 2009, 02:22:08 AM
is i need,thanks man
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Cerveza on May 27, 2009, 04:05:01 AM
is i need,thanks man

Your account has been placed in "restricted" status.

This is probably due to your first post being a comment or request.

Read THESE RULES (http://www.scriptuo.com/index.php?board=55.0) to see what you need to do to change your status.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Khameleon on May 27, 2009, 02:04:23 PM
sometimes its fun to pick and poke at those in Jail.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Kane12 on May 27, 2009, 08:01:11 PM
Just a word to the wise (as I wasnt lol).

I had been running this overnite over the last few nites .....

Dont do it........I woke up to a room full of wispy blue gates lol.....

and didnt even get anything loot wise to show for it....

But I did manage to get 1 heartwood, 1 yew, 2 ash, and like 8 oak fletching kits the prior few days before getting jailed...

So just a heads up warning to others out there.

Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Briso on May 28, 2009, 12:39:16 PM
nice script man, it works very well  ;)
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Cerveza on May 28, 2009, 12:43:57 PM
nice script man, it works very well  ;)

Three posts... THREE POSTS.

You couldn't even look up three simple posts?

Oh well, here goes....

Your account has been placed in "restricted" status.

This is probably due to your first post being a comment or request.

Read THESE RULES (http://www.scriptuo.com/index.php?board=55.0) to see what you need to do to change your status.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Khameleon on May 28, 2009, 01:51:45 PM
nice script man, it works very well  ;)

I believe this script might be getting around other ways now. how does he know the script works well?
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: upgrade1989 on May 30, 2009, 03:09:15 PM
good script

Post Merge: May 30, 2009, 05:09:55 PM
but..

Post Merge: May 30, 2009, 03:16:08 PM
thanx
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Khameleon on June 01, 2009, 07:24:17 PM
lol
if Post count = 3
and Merge = 2
PC - M = Restricted!
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: upgrade1989 on June 07, 2009, 04:44:49 AM
i want it
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Cerveza on June 07, 2009, 05:47:27 AM
i want it

And it can be yours, in it's entirety, once you learn HOW TO FOLLOW THE RULES.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: bryweyh on June 09, 2009, 02:44:00 PM
this script rules
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on June 09, 2009, 02:46:15 PM
this script rules

keep in mind that posting will not clear your restricted status.  You need to post a new member intro to life your restriction.

"Hi, I'm new" just won't cut it.  Let us know about yourself, where you live, how long you've played, etc, etc.  Get creative!
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: creedgaming on June 09, 2009, 06:43:55 PM
This script is great!

[modbreak]Deleted quote - TM[/modbreak]
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: u8524009 on June 12, 2009, 08:37:41 AM
thanks a lot, I have found this script for a long time.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: mariete on June 12, 2009, 08:40:53 AM
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Toptwo on June 12, 2009, 08:46:08 AM
I dont think either of you two can even think about getting this script untill you post proper introductions...you might want to read over the site terms found here: http://www.scriptuo.com/index.php?topic=447.0

you might also want to read this:

http://www.scriptuo.com/index.php?topic=1683.0

with what you have posted so far your accts will remain restricted
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Cerveza on June 12, 2009, 08:47:23 AM
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: mariete on June 12, 2009, 09:14:18 AM
Thanks for the information i should read the rules first :(
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: 8 Ball on June 13, 2009, 08:47:27 AM
Just started running this today in a VM, very impressive script :) One thing though, I'm running it from a bank and when it goes to drag items from my loot bag into the loot bag within the bankbox it picks up each item once but doesn't drop them into the bank lootbag. Is this a known issue?
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Khameleon on June 13, 2009, 10:03:17 AM
Redo you guided setup and try again.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: marcelohpborges on June 15, 2009, 10:13:48 AM
GOOD
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Cerveza on June 15, 2009, 10:16:41 AM
GOOD

Not so much... Please read the rules before you post. Most times we just keep you restricted, so you won't have access to anything. Sometimes the temp ban hammer falls, and you get a few days to think about it.

In this case, I'm going to assume that English isn't your native language. I hope you will take the time to translate an into and post it appropriately. Only then will your restriction be lifted, and you will be able to get this "GOOD" script.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Coragin on June 23, 2009, 12:41:57 AM
Couple questions as I ran this script for a few days, simply because its a pain to turn in regular boards to vesper, just not worth the time.  And the chance for a runic rules.

First I will start with quest related questions, having nothing to do with the script.

1. I know about runic saws and fletching kits.  Can you get runic hammers and sewing kits from the blacksmithing/tailoring portion? (I am pretty sire its just recipes right?

2. Is there a runic tinkering tools?

Now on the the script itself questions.

1. Are there any plans to add in tinkering, smithing and tailoring rails and options?
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on June 23, 2009, 12:47:30 AM
I don't think you you get runics from the other quests.  Just recipes.  I could be wrong, though.

The public versions of the quester only have carpentry/fletching, but the Elite version (2.0) has blacksmithing/tailoring/tinkering as well.  There are no plans to modify the quester here to do anything else since it's really a runic farmer.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Coragin on June 23, 2009, 07:59:54 AM
Thanks TM, all I needed to know.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: dudabello on June 28, 2009, 01:36:39 AM
thanks a lot :o
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Cerveza on June 28, 2009, 02:11:13 AM
thanks a lot :o

Your welcome a lot, and once you post a good intro, telling us about yourself, you too will have access to the fine features here at SUO.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Toptwo on June 28, 2009, 04:30:47 AM
thanks a lot :o

WOW, 2 posts totalling 4 words..A post under somebody else's intro, and a post in the heartwood questor...I guess it isn't to obvious what YOU are here for.

Cerveza must have had a GREAT day and be in a SUPERIOR mood, cuz I think I would have just banned ya!
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on June 28, 2009, 10:10:33 AM
We're a lot more relaxed now that everyone is restricted until they post something worth while.  *blood....presssure......falling......"
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Nightmare on July 10, 2009, 06:18:24 PM
Thanks!
I have found this script for a long time,finally i found here,Thanks a lot... ;)
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: wincents on July 11, 2009, 12:08:00 AM
Thanks!
I have found this script for a long time,finally i found here,Thanks a lot... ;)

yeah I too ! very good script thanks ! ;)
Title: Still keep having problems walking with packie full
Post by: Minus on July 14, 2009, 06:32:16 AM
Hell o i posted about this before but i been kinda on a break for a while New Baby and all... Anyways i turn this script on and it loads teh bettle recalls to heart wood. And then for some reason he keep trying to run i do not have always run on and this is nothing at all open other then the stuff for the game. I asked before if it could be my resolution or soemthing of thqt sort i have tjryed everything i can think off except dropping how much my beetle carrys any help would be awsome:P
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Cerveza on July 14, 2009, 06:43:57 AM
Minus - please take a few minutes and read through this post in it's entirety. Pay special attention to the FIRST page of posts, but continue to read the entire thing.

Often users will d-load the script, start it up, find there's an issue, and come to the end of these 17 pages of postings and ask a question that was already addressed earlier in the same post.

All we ask is that you very carefully read through everything here and if you still have a problem, please post it with as much information as is possible. We would be very glad to help you.

*OH and if you think it's a resolution issue, then run at a normal resolution to test it. If you think it's a UOAssist conflict, then run without UOAssist and see if it works. Take a little responsibility as a user and at least try to fix things on your own. Remember, this script works without fault for 99% of the people who use it. If you are having issues, then it's going to be a problem on your end, which is difficult for us to fix.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Minus on July 15, 2009, 04:13:08 AM
Woot I got it all i had to do is watch where my cursor was at and center my screen on it and poof iot works like a charm i got a yew last nite... I kinda thought it was a reso problem.. But it  kinda was running in wide screen and having my uo window centered made it wanna run all the time. And cervase maybe i missed this in the first of the 17 pages man but i looked thru them 2 times yesterday and try changing a bunch of setting in uo.



OH Almost for got Thanks This script save my little fingers from working to the bone and first nite working i got a yew...

Post Merge: July 16, 2009, 05:29:49 PM
Wow thanks for this script i got one heart wood yeasterday and 5 yew runics and i got 2 heartwoods today thanks so much
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: apollo99999 on July 19, 2009, 10:01:11 AM
look like very good, i want try~
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Ultima on July 19, 2009, 10:13:29 AM
Woot I got it all i had to do is watch where my cursor was at and center my screen on it and poof iot works like a charm i got a yew last nite...

Ah-ha! Finally some verification about the cursor!

I would have thought at some point someone would have come in and thanked me for my 2 cents about the cursor proving that I'm not crazy. Afterall I couldn't be the only one experiencing the issue. But they're probably to busy raking in runics. ;)

At last some vindication about the cursor. 8)
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Blizer on July 21, 2009, 08:43:57 AM
Hmm recall fail check not working.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Cerveza on July 21, 2009, 08:59:32 AM
P
Hmm recall fail check not working.

Perhaps a little more information might be useful.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Blizer on July 21, 2009, 10:40:34 AM
P
Hmm recall fail check not working.

Perhaps a little more information might be useful.

Spell fizz or recall spot is blocked it continue script and try move to heartwood.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Cerveza on July 21, 2009, 10:43:01 AM
Reread the entire post, paying special attention to the first post and how to properly setup your runebook.

Are you on OSI, freeshard, hybrid???

The blocked is because you are trying to recall to the spot your standing on, you have something setup wrong. I don't know why you are fizz'ing. Are you using Magery? What is your current skill in magery?
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on July 21, 2009, 11:25:10 AM
If you start having issues with locations being blocked, just move your runes!  Fizzles are handled unless you are using chivalry.  I'd recommend using Magery.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Blizer on July 21, 2009, 11:56:27 AM
I am using magery. I dont have fizzle problem anymore with better +magery items but rune location was once blocked so thats end of it, must to restart script
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Cerveza on July 21, 2009, 12:00:31 PM
You need the Deluxe version that will move people or objects which block your recall position.

Perhaps if you contribute to SUO, and continue to post excellent advice, help and test results, you'll be invited to be an Elite member, and get access to the Deluxe "object and people moving" version of the scripter.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Blizer on July 21, 2009, 12:16:59 PM
One thing can be nice don't now if that elite version have this but my another account farmer got only 50 bowcraft and 50 tinkering on start. So you fail with that tinkering skill when making more tool and loosing ingots. When u are out of ingots and tools its halt script, would be nice if you return back to house and get more. OK OK i know stack more ingots in your beetle and bags, but if forgot do that sucks to wake up on morning with pop-up "out of ingots HALTING"
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on July 21, 2009, 12:20:54 PM
Just craft a whole bunch before and put them in your secure.  This script is meant for a more established character and not a newly started one.  I suggest you work some of the skills ahead of time.

With my GM crafter, I can run this script forever.  You are asking the script to do things that are difficult for you to do when you are sitting at the keyboard.  Just take some time to work up your tinkering and your used craft skill to make sure the script runs within its design envelope.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Cerveza on July 21, 2009, 12:28:31 PM
Blizer - please don't take this wrong.... From what I see in your last few posts, here are your concerns:

1 - Spells fizz cause you don't have enough magery
2 - Locations are blocked because other people play the game besides you
3 - Your tinkering is too low to make simple tools

These are not script issues. These are your issues. You can't expect a script that works perfectly for 99% of the people who use it to be completely torn up and modified so that it works for you, can you?

The script is designed for someone who has enough skill to recall, is smart enough to mark a rune in a good location, has enough skill in tinkering to NOT fail when making tools (what is it, like 60?).

Surely you can see that these aren't Quester issues right? It's like saying "My car sucks because I'm legally blind", maybe your car is fine and it's your driving that sucks?
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Petkiller on July 21, 2009, 02:20:24 PM
Has anyone else on Atlantic noticed an increase in high runics(yews heartwoods), since that patch last week I have gotten a total of 14 yews and 4 heartwood kits.  I though at first I was just lucky but looking at find uo and search uo I am seeing a LOT of kits forsale and prices falling a bit.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Cerveza on July 21, 2009, 02:24:00 PM
I fired up the quester for the first time in a LONG time and overnight got a runic saw, then the next day got a runic kit. It did seem a little too good.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: KilroyIsDead on July 21, 2009, 03:06:16 PM
They are very common in the last few days I have 18 fletching kits since Saturday 3 are heartwood
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on July 21, 2009, 03:08:24 PM
It's funny; it was too difficult before, but now it's too easy!  Duh.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Blizer on July 21, 2009, 08:10:42 PM
I have got 10 heartwood and about 20 yew kits in 3 day :)
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: YnojY on July 25, 2009, 07:51:48 AM
GOOD
Eu sou do Brasil!!!
Vlw pelo Script, tomara que funcione perfeitamente =)

PS: Duvido que vc entendam alguma coisa que eu disse.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Blizer on July 25, 2009, 10:32:12 AM
hmmm brasils...
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on July 25, 2009, 10:36:51 AM
GOOD
Eu sou do Brasil!!!
Vlw pelo Script, tomara que funcione perfeitamente =)

PS: Duvido que vc entendam alguma coisa que eu disse.

I am of Brazil!!!  Vlw by the Script, hopefully functions perfect =)

PS:  It doubts that vc understand something that I said.  

Great translation site:  http://www.freetranslation.com/
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: YnojY on July 27, 2009, 11:28:09 AM
Hello to everybody, I registered myself and not I know as download of that script.
Would be able to me of the some instructions?
Of prefer using an English well classic, or I am not going to obtain to understand.

Thanks!!!  ;D
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Superslayer on July 27, 2009, 11:33:02 AM
Language barrier, rats. :)
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: samda25 on July 28, 2009, 02:41:55 AM
This is soooo great. And I am very interesting in this site...Nice Job@@
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: madatu on July 30, 2009, 05:17:58 AM
As usual works effortlessly. Ass all of your scripts do TM. I have a question i use Windows Vista Ultimate. When i was using xp pro i didnt have this issue but i do with Vista. When i get a runic or an good item the script use to do tada. It no longer does it and i would like it to. I read thru the script and found where it is suppose to do it or so i believe. It says sound tada. i changed it to   C:Windows/Media/tada.wav (sound) but it still isnt doing it. can you give me a pointer or two.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Cerveza on July 30, 2009, 05:21:11 AM
Thats where it's supposed to call the sound from, you'll have to isolate it in Vista, or copy the sound file somewhere else on your system and call it from there.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: madatu on July 30, 2009, 10:37:46 AM
OK thisis what is in the script for notification --  sound tada.wav       On Vista the sounds are in C drive, windows, media is where the sounds are at. i tried   C:Windows/Media/tada.wav (sound) but it dont like that. Can you advise me what is should be.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on July 30, 2009, 10:39:27 AM
take and copy the tada.wav file to your EUO directory and just change the path to just "tada.wav"
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: madatu on July 30, 2009, 11:36:56 AM
like this "tada.wave"  or sound  tada.wave  ot plain tada.wave.  i tried plain tada.wave didnt work  will try the others. I did as you said i plaved a copy of the tada.wave in the same place as the easy.exe and the heartwood scripts.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on July 30, 2009, 11:39:02 AM
It's probably called tada.wav (not wave)

and you just make that line "sound tada.wav"
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: madatu on July 30, 2009, 01:57:49 PM
Sorry ifi am a pain. I made a copy of the tada.wav file and put it in my easy.exe file with the heartwood script stuff in it. I still cant get it to work. I changed the line to "sound tada.wav" which made the words green, i tried the sound tada.wav and i still get nothing this made the lettering black. Last i will try sound "tada.wav" i guess if i cant get it to work i just not going to have the alert. There are four places in the script where there is sound they are all in the same area in the script. I have been changing them all when i change them.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on July 30, 2009, 02:12:39 PM
the only other think I can thing for you to do is to locate like 1108, and change it to this:

Code: [Select]
sound #CURPATH , tada.wav

If that doesn't work, then you're just gonna have to get used to it without sound....
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: seeriusly on August 01, 2009, 09:29:56 PM
WOWZAZ!!  This script is flipping insane!  I can't imagine the time put into it, and wanted to thank you guys that put such HUGE effort into this.  Unbelievable!!  I got a yew, 3 oak and some 27 talismans in the first 25k boards.  Thankyou Thankyou Thankyou...  I went out today and bought another computer because my old one wasn't cutting it.  I was going to buy one anyways, this just made my mind up... LOL!!

  So I tried to fish through it, I found where I could add items, and intensities.  Havn't messed with the original yet, but I will soon enough.

  I can usually figure things out, but this time, there wasn't enough hints on this forum (that I could find anyway...) to solve my only problem.  And that's dumping loot into the bank secure.  I have tried all different kinds of containers, tried restarting the guided setup, and tried for a couple hours collectively to find out where in the script the code is for dumping to loot bag, but it's mostly greek to me.  I didn't want to ask, being so new to the place, but I can't help it now.  I will try to figure it out myself, if I could get a hint of some kind.  Unless you guys are willing to share your supreme knowledge, and give me a bit of advice.


Thankyou Thankyou Thankyou for the awesome script...  It works very very well without dumping into bank loot, but it's just a little annoyance that is hindering me.

Any help on this and I will be in debt to whomever.  Thanks in advance
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Superslayer on August 01, 2009, 09:35:59 PM
Although I can't personally shed any light on the incredible script that TM has shared with everyone, ( haven't even dl'd it to use (not much of a player of pvm atm) ) but I will say BRAVO to you sir for showing great enthusiasm and a willingness to go head first into thinking, looking and trying for yourself FIRST before making posts like, ' this is brokn, doesn werk' or ' gimme fix, doesn start when i pres play'.  So kudo's to you sir, thank you for being cool headed.  8)

+ 1 Karma
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: dunarrack on August 02, 2009, 06:48:27 AM
Thank you so much for the script.
Anyone know why the script sometimes dont take the correct quest?
It then hangs. But most of the time if I am not laggy, it works perfectly.
Thanks again.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Toptwo on August 02, 2009, 06:51:31 AM
Question...since you are on restricted status, mind telling us where you got this?

Also, since you want help, you might want to consider going here:

http://www.scriptuo.com/index.php?board=55.0

and following the site rules
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: dunarrack on August 02, 2009, 07:34:38 AM
Question...since you are on restricted status, mind telling us where you got this?

Also, since you want help, you might want to consider going here:

http://www.scriptuo.com/index.php?board=55.0

and following the site rules

I dont know if this violates anything, but I am gonna tell the truth... yes this is my first time on the site and I've used a few scripts from this site sent to my by my buddy.
He usually send me scripts when I ask him something like "hey dude is it possible to do A then do B while I am using C", he usually icq me a script that works with that situation. He has a script library, that he kept roughly 500 different scripts (mostly modified to work the best on the template he chose). And he is a decent script writer too, he made a few not so perfect scripts from other sites into personalized script that work perfectly depending on my template.

So there. Sorry if I violated the rules but I didnt know...

Oh yea I was typing it after leaving that first post. Thanks.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on August 02, 2009, 10:43:34 AM
Well, you've come clean, registered and have posted a thoughtful intro, so you're not doing anything wrong.  However, your friend shouldn't be distributing scripts found here when they are easy enough to get just by dropping by.  Someone like that I would probably put on infinite restriction.  :)

As for your question, the only time I've ever had it select something wrong is when I was using the computer and trying to do something else.  You just can't do the heartwood quest thing and try to use your computer.  You should dedicate the computer or run the script in a dedicated virtual machine.  That'll fix you 100% of the time.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on August 02, 2009, 10:46:20 AM

  I can usually figure things out, but this time, there wasn't enough hints on this forum (that I could find anyway...) to solve my only problem.  And that's dumping loot into the bank secure.  I have tried all different kinds of containers, tried restarting the guided setup, and tried for a couple hours collectively to find out where in the script the code is for dumping to loot bag, but it's mostly greek to me.  I didn't want to ask, being so new to the place, but I can't help it now. 

I have been meaning to publish the fix for this, but for now here you go:
change line 230 to this:

Code: [Select]
gosub DragItem #FINDID #FINDSTACK C %lootstorebag_bank

That should fix it assuming you've already run through the guided setup.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: seeriusly on August 02, 2009, 12:43:50 PM
That's it man!  You rock...  Works like a charm!  Though since my last post here, I'm starting to think that I should be dropping them at a house, so if i get locked up or banned, I'll still have the loots haha...

I appreciate you taking a look at it.  And get on them kits man, before they change the drop rate!! or they drop in price  ???
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: mark on August 02, 2009, 05:47:37 PM
That's incredible!
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on August 02, 2009, 06:01:27 PM
That's incredible!

Really?  You'll BE TOTALLY AMAZED when you can actually download it.  ;)
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: mark on August 02, 2009, 06:04:54 PM
I wish I could test it.

Its a brazilian guy trying to find out a really good one macro.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Toptwo on August 02, 2009, 06:10:42 PM
Testing it isnt that easy, it requires following the site rules...
you can find them here:

http://www.scriptuo.com/index.php?topic=1750.0
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: PjPjPjPj on August 02, 2009, 11:46:47 PM
script looks awsome, would love to try it out :)
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Cerveza on August 03, 2009, 03:56:40 AM
Now that you've met the boards required intro post, you may.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TabulaDes on August 04, 2009, 09:52:21 AM
Well, I have all the files in same directory. Set up the script and click run. It packs up my beetle, heads to heartwood and works great that far, but then it just toggles thru the quests, over and over again. Seems to be unable to select the quest?
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on August 04, 2009, 10:02:37 AM
You're just gonna have to read through this thread and the 1.16 thread.  This question has been beaten to death.  100% of the time it has something to do with the way you have your system setup or how you are using the system at the time.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TabulaDes on August 04, 2009, 10:07:47 AM
Then read i shal!! Thanks for the response
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on August 04, 2009, 10:12:33 AM
I apologize for the grumpy response, but sometimes the same heartwood questions just make my right eyelid start to twitch!  lol
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Paulonius on August 04, 2009, 01:05:43 PM
I have noticed that most people do not modify their rail to HW and I have been guilty of this as well.  I suspect that not everyone knows how to make new rails, so I thought I would drop a quick post to help folks modify their files. You don't have to make a complete rail, you can simply change the coordinates of your last stop so that there are not six people standing on top of each other virtually screaming "I USE TRAILMYX'S HW QUESTER!!!". To change your HW Quester spot do the following:

1. Locate the rail file that you are using to get into HW.  Open the file, but don't run it.  The file will be in the same folder as the HW quester and will be titled based on which quest you are doing: eg. hw_bowcraft, hw_trinket, or hw_newtrinket.

2. Go to the HW spot that you usually run to.  

3. Expand the "Character Info" section at the top of the right side window pane of EasyUO

4. Now look at the rail file in the left pane of EasyUO.  There should be just two lines. The top line is the rail and that line is considerably longer than the 80 or so characters you see on the typical screen.  Scroll the left pane to the right until you come to the end of the long line of text.  Look for two numbers that are the same or very close to the values that appear in the right pane of EasyUO after #CHARPOSX: and #CHARPOSY: These two values are your current coordinates.  If you managed to go to the spot you run to when you run the quester, these values will match the values for the end point of the rail that TrailMyx so generously created for you to use.

5. Now move a bit off of the end point of the rail to get coordinates for your NEW endpoint.  Just pick another spot in the same general area.  Replace the coordinates of the old endpoint with the coordinates (#CHARPOSX: and #CHARPOSY:) for the spot you picked and save the rail file.  Just change the numbers and keep the syntax the same. You don't need to change anything in the HW quester.

The next time you start the HW quester it will end up at the new rail point.  If you screw it up, you can always download the rail file again.  

Happy questing!

-P
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: mark_21 on August 04, 2009, 09:09:32 PM
WOW this is an awesome site! this site has so much more friendly people and awesome utilities that other sites dont offer! woot keep it up!!
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Toptwo on August 05, 2009, 04:49:05 AM
Thank you,

  Now, if you want to be a part of this fantastic site, you will need to go here:

http://www.scriptuo.com/index.php?topic=1750.0

and follow the simple site rules....Thanks

Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: seeriusly on August 05, 2009, 08:16:48 PM
Thanks Paulonious!  Very well taught...  I have been meaning to change that since I started.   :D  I want to redo the whole rail due to the jogs it makes my character do, and I read it somewhere how to do it, just don't remember where.  I appreciate you taking the time for that!
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: seeriusly on August 05, 2009, 09:00:20 PM
So I have a question about editing the looted items part of this script.  I have commented-out the artifact items in the script, because I had 60 something recipes in the bank and don't need anymore...  I wanted to however loot talismans with 25% bonuses and Id like to get a 100% merkatus killer talisman also...  Here's what I have:

Code: [Select]
  ;set %artifact1 blight , #spc , gripped , #spc , longbow
  ;set %artifact2 faerie , #spc , fire
  ;set %artifact3 feywood , #spc , bow
  ;set %artifact4 mischief , #spc , maker
  ;set %artifact5 the , #spc , night , #spc , reaper
  ;set %artifact6 aquarium
  ;set %artifact7 bramble , #spc , coat
  ;set %artifact8 ironwood , #spc , crown
  ;set %artifact9 phantom , #spc , staff
  set %artifact11 bonus: , #spc , 28
  set %artifact12 bonus: , #spc , 29
  set %artifact13 bonus: , #spc , 30
  set %artifact14 killer: , #spc , 100
  set %artifact15 Merkatus
  set %artifact16 bonus: , #spc , 25
  set %artifact17 bonus: , #spc , 26
  set %artifact18 bonus: , #spc , 27
  set %recipecount 13

So I will be looting only %artifact 11-18.  I am confused with the last line of that code, should the recipe count be 18? or 8 and the items I want to be looted should they be numbered 1-8 and just get rid of the others completely???  Thanks in advance.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on August 05, 2009, 09:39:54 PM
You should probably create a rule for that in the CLAw instead.  You can do ranges greater than a value.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: seeriusly on August 05, 2009, 09:47:07 PM
I tried working with claw, and couldn't quite figure it out completely.  So I just used BMEval.  I'll read up on it, Thanks TM
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on August 05, 2009, 09:54:37 PM
If you insist to have the artifacts looted with the quester instead, make note here that your list HAS to start at %artifact1.  I notice you are starting at %artifact11.  That won't work.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: JustAnotherFace on August 09, 2009, 03:01:20 PM
Hi TM!

I have a bit of a question.  First of all, I will be the first to admit that I SUCK with OCR! Having said that, and stating that I have read back thru all 20-some pages of this thread, I am having a bit of difficulty.  I am following the instructions :

Code: [Select]
KEEP UO screen uncovered. This is so the OCR can see the quest
32-bit video card setup, will not function at 16-bits or 8-bits
Do not run this quester in full screen mode or the OCR functions will not work properly.

However, obviously some settings are different on my machine which is causing me to get a different # for the simple bow quest and I just keep toggling thru all of the available quests never choosing one.  I realize what the problem is, my problem is that I have stepped thru the script and I cant figure out how you are arriving at
Code: [Select]
set %QUEST_A_Simple_Bow 6641256 for the bow quest #. 

Would you be either kind enough to explain it to me so that I can figure out how to get the number I need, or maybe you have a snippet of code that I can run to get the correct quest # using my machine.

Sorry for my ignorance. Any help that you can provide would be greatly appreciated.  I may even learn something! lol

Thanks,

JaF
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on August 09, 2009, 03:09:24 PM
At one point, I wandered through the entirety of Heartwood and calculated all these numbers for you.  I actually used the same code found in the quester to reveal what the numbers are.  You can easily do this to by locating the lines of code around 2217 and place a "pause" right after the gosub:

Code: [Select]
   gosub NewSampleArea NULL !clickxposition1 !clickyposition1 !clickxposition2 !clickyposition2 8701514
    pause
    if #RESULT = !questval
    {

Just look at the numbers being returned in the #RESULT.  When you get the number that corresponds with the quest your are interested in, then that's the one.  Just update your script with whatever this value is so it knows what a "match" is.

The number "8701514" is just what the script considers the text color.

Hope that makes sense.

Edit:  There are extreme examples of people that just have different values computed per pixel, or their assumed text color value is different.  You can try and determine that your actual text color is.  I wrote a total OCR script a while ago that tells me that these values are, but it doesn't help others who have different math occurring. 
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: JustAnotherFace on August 09, 2009, 03:15:50 PM
Thanks for your help TM! That makes perfect sense. I think I should be able to get it now.  Thanks for the quick reply!

JaF
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on August 09, 2009, 03:18:36 PM
Check out my edit; some people just have different values happen.  What kinda of video card do you have and have you updated your drivers recently?
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: JustAnotherFace on August 09, 2009, 03:37:33 PM
I have an Nvidia 8800 GTX and yes, I just updated drivers last week.  I inserted the pause and watched the #result field. For some reason for every quest its returning 2700 for me.... guess I still have some figureing out to do. But thanks again for your help.

JaF
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on August 09, 2009, 03:52:49 PM
sounds like the value for the "text" color isn't correct for your computer.  For me and about 99% of the rest of us, it's 8701514.  Not sure what it could be for you.  Is this OSI?
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: JustAnotherFace on August 09, 2009, 04:12:36 PM
Yes, its a production OSI shard.

Post Merge: August 09, 2009, 04:23:16 PM
ok, well now i feel like a total idiot!! I just checked my display settings again. and low and behold somehow in the last 2 hours it changed from 32bit to 16bit.  I changed it back and the script works like a charm.  So so sorry for the problems TM.  Gotta love windows  :-[
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Scrripty on August 09, 2009, 10:28:50 PM
I was going to say before I got to the last post... you're in 16 bit. :)  If it's skipping your quest you are 99.9 percent of the time in the WRONG DISPLAY RESOLUTION.  You *MUST* be in 32 bit display resolution for OCR TO WORK. :)
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on August 09, 2009, 10:50:25 PM
I have developed a fix for the 16-bit thing too, whenever I get around to really needing to update the quester, I'll integrate that change.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Paulonius on August 11, 2009, 07:20:28 AM
Strange thing happened to me yesterday while running HWQ.  I came back to my computer and my character was doing quick burst pathfinding that looked like it started at my house.  Beetle was no where to be seen.  I had to shut down the computer because the cursor didn't want to mind. After I did, I logged and the beetle was indeed lost.  I got a new beetle, checked runes and what-not to make sure I was ready to roll and started it up again.  The craziness started right up during the startup process, I believe because the script was unable to find the house secure.  I shut it down again and re-ran setup and the problem was fixed. 
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TabulaDes on August 11, 2009, 08:26:32 AM
Before I ask my question, a quick disclaimer! I swear I read back, I read back from page 21 to page 13, however my very short attention span forces me to resort to asking. Forgive me hehe
Anyways! In the wonderfull world of UO, the most Useless wood type is Oak, Can't use it, can't sell it. I was hoping there may be a way to set up the script to use it? I've poked around in the script a bit to try to find where to change it, but to be honest, it is still all gibberish to me =]
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on August 11, 2009, 08:37:37 AM
That information is in there,TabulaDes.  Read, read read!  Might be in the 1.16 thread also.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on August 11, 2009, 08:59:42 AM
Ok, so I'm feeling a bit generous today.  :)

Locate the line:

Code: [Select]
set %reshue 1 ; 1-wood, 2-oak, 3-ash, 4-yew, 5-hearwood, 6-bloodwood, 7-frostwood

located in either your fletching setup or your carpentry setup and change the value of %reshue accordingly.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TabulaDes on August 11, 2009, 09:16:28 AM
I was about to dislike you! but all is forgiven now =]
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: jeffs on August 11, 2009, 10:40:48 AM
Question:  downloaded this today and got it working with BTItemEval (was having some problems with CLAw...I'll worry about that later ;) ).  It's a nice script and I got it working, kinda, but I had to drop the number of boards it loads at a time onto the beetle to 500 -- when it was loading 1540 boards, the mount was getting fatigued in heartwood and only going 2 or 3 steps at a time then having to pause for 10 seconds or so to regain stamina.  Is it supposed to do this?  I'm guessing I must be doing something wrong...is there a way to make it so that the beetle follows me into heartwood rather than me trying to ride it?

Thanks in advance.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Cerveza on August 11, 2009, 10:49:32 AM
You have "always run" selected. Turn it off and it'll work fine.

That's a guess.... how'd I do?
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on August 11, 2009, 11:06:58 AM
<-----------------  Points at the checklist and views the last entry.

I promise if you refer to that checklist and the Q/A, you'll get most of your questions and problems answered.  Also remember that you can't be using the computer during the questing process.  You can't even be multi-clienting it without the movement of one script interfering with the movement of another.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: jeffs on August 11, 2009, 11:09:55 AM
Doh!  Actually I did go right down the checklist.  I just misread it as "Make sure Always Run *is* selected."

Clearly I am getting old.  I actually had Always Run unselected and selected it especially to run the script. ;)

Anyway, thanks for the help. :)
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Cerveza on August 11, 2009, 11:11:13 AM
YES! I won!! Woot...

Can I get a Woo Woo ?
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on August 11, 2009, 11:12:06 AM
+1 karma for Cerveza!
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: seeriusly on August 11, 2009, 07:43:00 PM
Ok, so I'm feeling a bit generous today.  :)

Locate the line:

Code: [Select]
set %reshue 1 ; 1-wood, 2-oak, 3-ash, 4-yew, 5-hearwood, 6-bloodwood, 7-frostwood

located in either your fletching setup or your carpentry setup and change the value of %reshue accordingly.

Thankyou.... Thanks....  And TY Again.  I just flipped the plain and oak #'s in the setup sub and was coming back to the computer with it saying, insufficient boards. until I clicked oak in the fletch menu.  So Thankyou!


10 Minutes later....

Now it is trying to make Dull Copper Fletch Kits since I changed that reshue to 2 for oak.

  *Goes back to rigged way*
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on August 11, 2009, 08:05:43 PM
You'll probably just have to keep a bunch of fletching tools on you.  That's the easiest way to get you going.

Edit:

you can also try changing the %reshue value at line 889 to 1 like this:

Code: [Select]
    gosub CheckAndCraftItems %tinktools %tool %toolresource %toolresourceamt 1 %maxcraftingtools %craftitemchain_tool ; iron or normal wood for tools

Probably should put a switch in there because some tools are made with ingots and some are made with wood.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: jeffs on August 12, 2009, 02:43:40 PM
Ok, I have another question (forgive my noobishness).

The quester works great except I'm having one problem -- after it's been to heartwood, done the quests and run through all the boards, then recalls back to my home, it gives me the error: "Not enough boards to run script, halting."  There are lots of boards in my secure, but it's not going to the secure...instead, it seems to be just checking the beetle's pack and not finding any there (which there aren't, of course, because it just used them all).  I ran through the checklist again, and I'm pretty sure I have everything set up correctly now.  I thought I might need to have the secure right at the edge of my home plot, so I moved it there and set the recall spot right next to it, but I'm still getting this error.  Any ideas?
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Cerveza on August 12, 2009, 02:46:57 PM
Setup? You have to ensure the secure at your house is visible wherever you recal to.

You might run through your setup again just to make sure you have secure and storage set right.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: jeffs on August 12, 2009, 02:51:45 PM
Setup? You have to ensure the secure at your house is visible wherever you recal to.

You might run through your setup again just to make sure you have secure and storage set right.

Hmmm...if it has to be visible, it might be a UO issue then.  When I recall from Heartwood, my house has unloaded, and to see the lockdowns and secures again, I have to step back onto the plot.  I've got it set to cache the max number of houses, but I live in a crowded area and have a heavily decorated front yard.

Oh, and I did re-setup when I moved my secure (wasn't sure if this was necessary or not).
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Cerveza on August 12, 2009, 04:06:25 PM
That might be it, most guys leave a space in the front steps and mark their rune there. Put a bag or something on the steps next to that and your good to go.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: jeffs on August 12, 2009, 05:29:51 PM
That might be it, most guys leave a space in the front steps and mark their rune there. Put a bag or something on the steps next to that and your good to go.

A-ha!  Thanks.  Locking my secure down on the steps looks like it'll do the trick -- it's visible now even when the rest of the house's lockdowns haven't loaded.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TabulaDes on August 15, 2009, 01:51:56 PM
Ok, so I'm feeling a bit generous today.  :)

Locate the line:

Code: [Select]
set %reshue 1 ; 1-wood, 2-oak, 3-ash, 4-yew, 5-hearwood, 6-bloodwood, 7-frostwood

located in either your fletching setup or your carpentry setup and change the value of %reshue accordingly.

Thankyou.... Thanks....  And TY Again.  I just flipped the plain and oak #'s in the setup sub and was coming back to the computer with it saying, insufficient boards. until I clicked oak in the fletch menu.  So Thankyou!


10 Minutes later....

Now it is trying to make Dull Copper Fletch Kits since I changed that reshue to 2 for oak.

  *Goes back to rigged way*

I had this same problem also, However there is an easy way to fix it. well two easy ways. 1. Carry dull copper ingots! lol. 2. After the script has started it will attempt to create fletcher tools, wait until the tinkering menu pops up, then pause the script. Manually switch to iron ingot and hit play, it will pick up where it left off, using iron ingots instead of dull copper. And I usually only have to do that the one time at the begining, after that it continues to use the iron.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Insideout on August 18, 2009, 06:22:33 PM
I like the script Thanks TM. Is there a way to Mod it to where you have to load and such manually?

I don't really like using all the rails and such. I don't do unattended basically. Do you have one that you can walk down and it does the questing part and that be it?

Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on August 18, 2009, 06:25:13 PM
I like the script Thanks TM. Is there a way to Mod it to where you have to load and such manually?

I don't really like using all the rails and such. I don't do unattended basically. Do you have one that you can walk down and it does the questing part and that be it?



Nope, but what you ask is easy to modify.  Just follow the main loop and comment out the railing and the resource loading loading.  Pretty simple.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Insideout on August 18, 2009, 06:54:38 PM
Well that's
a bit Greek to me but i'll get it figured out .

Post Merge: August 18, 2009, 07:39:01 PM
Figured what the heck ran it with rails. Got where i needed to be and it just kept cycling the quests wait it did make 10 simple bows first. I thought I saw a thread on this somewhere. Stuck on dial up so takes years for anything to load
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on August 18, 2009, 08:02:19 PM
Go through the checklist and Q/A for this and the 1.16 quester.  Your problem is common and the solution is there.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Insideout on August 18, 2009, 09:12:18 PM
Well I guess I'm a moron. I cannot get this script to work. I have color set to 32 bit.  Pretty sure the screen is not set to full screen. Couldn't find where to change it other than the minimize button. I'm stumped
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on August 18, 2009, 10:05:20 PM
There have been a couple people that just couldn't get it to go for any reason.  So solution was found.  But let us know if you do finally figure it out.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Insideout on August 18, 2009, 10:18:45 PM
Finally !!! only problem is I think  heartwood entrance rune location keeps recalling back to the marked spot for about 10 tries then it goes
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on August 18, 2009, 10:50:13 PM
Finally !!! only problem is I think  heartwood entrance rune location keeps recalling back to the marked spot for about 10 tries then it goes

What did you do to fix it?
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Insideout on August 18, 2009, 11:00:16 PM
Honestly I have no clue computer crashed tried it again and it worked.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: purplecush44 on August 25, 2009, 11:02:53 PM
mine says cant find config file when i try to load setup
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on August 25, 2009, 11:54:05 PM
mine says cant find config file when i try to load setup

Hmm, can't be talking about the SUO Quester; you shouldn't be able to download it yet.  :)
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: bear2233 on August 28, 2009, 07:27:40 AM
Nice script Trailmyx. Just started using this one and so far no problems except all i've gotten so far is a oak runic saw hehe.

My old script i had to get the resources and use a bag sorter then manually look at the bags. So this script is making me cautious as i gotta rely on BMItemeval. But i guess it did sort the oak. Will post back when i get a heartwood.

Post Merge: August 28, 2009, 09:28:26 AM
Ok got my first heartwood. Now it's a VERY nice script hehe.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: NObama on August 30, 2009, 06:22:22 PM
TM has single handedly generated more gold and more uber bows than any other coder in any forum.  I've left heartwood because of all the haters, but this script will always have a special place in my heart.

Thanks so much.

=D
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on August 30, 2009, 06:29:23 PM
Ya, it's probably time for lots of people to take a break from the script so the script haters can go find something better to do with their time.

And don't remember the true father of this script is Cerveza.  I just gave it a soul like Frankenstein got his first birthday!  I guess that's why I think neck bolts are sexy!
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: NObama on August 30, 2009, 06:56:49 PM
My apologies to Cerveza!

I have 100M on a vendor that I owe to you!  (not that I'm sharing...)

=D
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Cerveza on August 30, 2009, 08:12:21 PM
Huh? Oh thought I heard my name...

I suppose the history behind "The Script That Changed UO Forever" should be someplace. Perhaps engraved onto a stone at EA headquarters? :)

SorrowMaster wrote a very slick quest selector that would make stuff and convert it to quest items. Freddy offered to write a free script for whoever got the first 100 posts on his forum. I won that, and asked (as a suggestion from my friend Papa) that he write an interface to rail into and out of Heartwood. He was too busy, so I played with it myself, and got loading beetles and moving around added to SorrowMaster's donation script. It functioned.... barely. The rail was extremely basic and failed far too much. Along comes TrailMyx who mentions in passing that he has a decent rail that would be pretty easy to interface up... understatement... his rail (like his other work) is some of the finest scripting you'll ever find. So suddenly, my little mash of a few scripts with the tidbits that I could add in, was working pretty good. TM started really looking at the project and saw several areas that could be improved, including the OCR recognition of quests. His work really transformed a decent, rail driven heartwood quester into a slick, finished product. Add in TM's incredible looter instead of BM's simple evaluator, and you have perhaps the best written, most game changing script UO has ever seen.

I'm sure I've left out some stuff... but that's the overall. TM, anything to edit/add?
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on August 30, 2009, 08:20:04 PM
I'm sure I've left out some stuff... but that's the overall. TM, anything to edit/add?

Eloquence as always.  Actually, there was some backstory I didn't even know about.  Cool!
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Scrripty on August 30, 2009, 09:46:50 PM
I'm sure I've left out some stuff... but that's the overall. TM, anything to edit/add?

Eloquence as always.  Actually, there was some backstory I didn't even know about.  Cool!

I love things that work correctly out of the box, and I've noticed that about TM's stuff.  Always works as advertised. :)   Thanks for the hard work guys.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on September 02, 2009, 05:16:14 AM
So what are the harassment methods being employed by the scripting haters?  I haven't paid much attention to this since I have been fishing nearly 24/7.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Scrripty on September 02, 2009, 06:41:02 AM
So what are the harassment methods being employed by the scripting haters?  I haven't paid much attention to this since I have been fishing nearly 24/7.

Candelabra's at the heartwood gate.  Gm's are asking non specific question when paged to circumvent Overseer.  Such as, "What color is your armor?"  "Are you there?" "What kind of weapon are you holding?"  And so on... :)  Have you noticed how BARREN heartwood is???  It's an injustice I tell you!
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: NObama on September 02, 2009, 02:55:43 PM
You know, this is probably the best opportunity for a Turing script ever!  Think of the brainpower we could put into a script to foil these non-predictable questions!

"What color robe are you wearing?"
A: "Ha!  That's a good one!  What color robe are YOU wearing!"
journal scan for _color_ and then repeat the word found after it in the reply

"What weapon are you holding?"
A: "Never ask a man about his weapon!"
journal scan for _weapon_

"What is my name?"
A: "What's in a name, really?"

I could have a blast with this, if someone could code what I think up...

 :)
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Paulonius on September 03, 2009, 08:35:09 AM
The walking mumbling miner makes random comments to throw off GM's.  It was a good idea, but after a while the GMs had seen the bot enough that they knew what to look for and the comments virtually screamed "I am scripting".  Made it important to personalize the comments.  Probably relevant to your idea too and something that could be built into the setup.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on September 05, 2009, 01:35:17 PM
Oh yeh, those walking mumbling scripts always made me laugh.  Think about it.  Do you talk to yourself in game?  Why should the script?  heh.

Anyhow, I have done a few AI question/response scripts.  Unfortunately they are only as good as knowing what questions are asked.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on September 05, 2009, 04:25:07 PM
Yup, pretty easy.

New rail, setup resources and target item and the "magic" number to select the correct quest.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: atothezuo on September 09, 2009, 10:37:01 AM
Why wont this run on a freeshard with razor? :( i see the checklist i havent tried but just wondering what the issue is with it
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on September 09, 2009, 10:40:48 AM
Most all freeshard implementations of Heartwood are "unofficial" since there is no "official" release of ML content.  So who knows if it'll work on a specific shard since there are lots of differences from shard to shard.  That's why we don't support suggested changes on freeshards.

Now if freeshard designers want to use this script to test their Heartwood implementations and it passes, then they have implemented Heartwood correctly... ;)
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on September 16, 2009, 01:40:25 AM
Due to changes in the crafting gump, we'll need to update this script.  As soon as EUO gets updated, I'll get both versions up and running.  Since I'm a very established account on Alexandria, I'll be able to get the script ready to go so when the masses have access to EUO, this script should work fine.

And NO, please don't PM for access to EUO ahead of time. 
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: NObama on September 21, 2009, 08:23:53 PM
*sings*

Did you ever know that you're my heroooooooo? 

Seriously, though:  I'm already jonesing for a heartwood fix.  Soon, I will have burned through all my oaks and ashes for imbuing training.

How ironic is it that I want to run this script for low end runics?

 :)
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Masscre on September 22, 2009, 11:34:59 AM
Hey the low end ones came easy in the day but only i was rat holing them away peeps where leaving them on the luna bank floor, on ground in heartwood, and on vendors for pennies.  Well needless to say i had around 1.2 thousand of the oak fletchers kits.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on September 27, 2009, 12:01:52 PM
I have this script updated already.  Once EasyUO is up and running again, it should work just dandy.
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: NObama on September 27, 2009, 03:28:03 PM
I don't suppose we can infer that you have inside knowledge of the progress...?

 :D
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on September 27, 2009, 03:48:58 PM
Nope, just guessing where the new gump click locations are.  Nothing more; I'm just a user just like anyone else. 
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: Scrripty on September 27, 2009, 04:20:05 PM
I don't suppose we can infer that you have inside knowledge of the progress...?

 :D

EasyUO still works for me... I don't know what you're talking about. :)
Title: Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
Post by: TrailMyx on September 28, 2009, 04:22:06 PM
Updated to 1.24

New to version 1.24:

Please note this will break client support for clients earlier than 7.x.x.x. 

ALSO!!!  The maker's mark has been updated, so you will need to default your tool back to automatically mark your items with your name.
Title: Re: ScriptUO Heartwood Quester 1.24 with Advanced CLAw support
Post by: Dude1598 on September 28, 2009, 06:21:56 PM
I dont know if anyone else is having this problem but when I run the script it keeps wanting to make tools at start up and not advance from there
Title: Re: ScriptUO Heartwood Quester 1.24 with Advanced CLAw support
Post by: TrailMyx on September 28, 2009, 06:25:27 PM
It will try and make 4 tools.  That's normal.
Title: Re: ScriptUO Heartwood Quester 1.24 with Advanced CLAw support
Post by: TrailMyx on September 28, 2009, 06:27:28 PM
what quest were you doing?
Title: Re: ScriptUO Heartwood Quester 1.24 with Advanced CLAw support
Post by: Dude1598 on September 28, 2009, 06:29:30 PM
I was doing carpentry and it I knew it normally made 4 but this keeps going on after 4
Title: Re: ScriptUO Heartwood Quester 1.24 with Advanced CLAw support
Post by: TrailMyx on September 28, 2009, 06:31:20 PM
what type of tool is it making?  Also, is your main pack open?
Title: Re: ScriptUO Heartwood Quester 1.24 with Advanced CLAw support
Post by: Dude1598 on September 28, 2009, 06:32:20 PM
smoothing plane

also I paused it when it was repeating making the tools it looks like its in the sub GumpAndSizeWait Dont know if that helps at all
Title: Re: ScriptUO Heartwood Quester 1.24 with Advanced CLAw support
Post by: TrailMyx on September 28, 2009, 06:36:38 PM
Hmm, it's working for me just fine.  I just got rid of all my planes and it made me 2 and off to heartwood I went.  Are you running razor or UOA?
Title: Re: ScriptUO Heartwood Quester 1.24 with Advanced CLAw support
Post by: TrailMyx on September 28, 2009, 06:37:10 PM
Be sure you have your main pack open, that'll cause your issue.
Title: Re: ScriptUO Heartwood Quester 1.24 with Advanced CLAw support
Post by: Dude1598 on September 28, 2009, 06:43:18 PM
Figured out the problem when I download the new upgrade one it was SUOQuester124-1

Then I just redownloaded and now its SUOQuester124-2 and is working great
Title: Re: ScriptUO Heartwood Quester 1.24 with Advanced CLAw support
Post by: TrailMyx on September 28, 2009, 06:44:26 PM
I'm not quite sure what SUOQuester124-1 SUOQuester124-2 are?  I only attached it once.  Did you download SUOQuester122?  That's the old one.  ;)
Title: Re: ScriptUO Heartwood Quester 1.24 with Advanced CLAw support
Post by: Dude1598 on September 28, 2009, 06:49:03 PM
Nope just open the other and it was the newer one

One thing I do want to say is Thanks for quick response
Title: Re: ScriptUO Heartwood Quester 1.24 with Advanced CLAw support
Post by: TrailMyx on September 28, 2009, 09:03:53 PM
I'm leaving 122 there just because there are still some freeshards out there who use the older client and some people have managed to get the quester to work in those places.
Title: Re: ScriptUO Heartwood Quester 1.24 with Advanced CLAw support
Post by: Hoby on September 30, 2009, 03:34:00 PM
im having that same issue.  After i go through setup and hit start it starts making a crap load of jointing tools.  Trying to run the carpenter quest.  Checked everything you mentioned a few posts ago. 
Title: Re: ScriptUO Heartwood Quester 1.24 with Advanced CLAw support
Post by: TrailMyx on September 30, 2009, 03:52:07 PM
You need to download the 1.24 version....  You are using the 1.22 apparently.
Title: Re: ScriptUO Heartwood Quester 1.24 with Advanced CLAw support
Post by: onlyindreams on September 30, 2009, 06:15:20 PM
Thanks for the update!... Guess I should've read this one first since it's the one I use  8)
Title: Re: ScriptUO Heartwood Quester 1.24 with Advanced CLAw support
Post by: Hoby on September 30, 2009, 07:31:08 PM
Quote
ript Name: SUOQuester - ScriptUO Heartwood Quester
; Author: Cerveza / TrailMyx
; Version: 1.24
; Shard OSI / FS: OSI / FS?
; Revision Date: 2007/05/05
; Purpose: Heartwood Quester with reload support for beetles
;          Only does Fletching (bows) and Carpentry (stools)

This is the one im using
Title: Re: ScriptUO Heartwood Quester 1.24 with Advanced CLAw support
Post by: TrailMyx on September 30, 2009, 07:42:53 PM
Dunno what to tell you hoby.  Try downloading it again.  That happens to me on OSI now when I run the 1.22 quester.  1.24 works fine.  Be sure you aren't running Razor or UOA.  It's been downloaded a bunch now, and nobody is having an issue. (except for you.)  :)
Title: Re: ScriptUO Heartwood Quester 1.24 with Advanced CLAw support
Post by: onlyindreams on September 30, 2009, 09:35:27 PM
Time for me to be noob-like.... Whenever I start up the script it gets to the part where I dismount from my beetle and it tries to open the secure. Instead of opening the secure I just start pathfinding around aimlessly.

I am using UO's most current patch
Running SUOHWQ 1.24
I am NOT running UOAssist
Always Run is NOT checked
My backpack/character status/paper doll/loot bag are all open with nothing covering them

After trying to run the script twice I re-did my setup. However, after doing setup I still have this problem. What have I overlooked?


*EDIT* After doing setup a third time it worked. The only thing I did different was move the quester menu window off to the lower corner of the screen before clicking start.
Title: Re: ScriptUO Heartwood Quester 1.24 with Advanced CLAw support
Post by: TrailMyx on September 30, 2009, 09:45:58 PM
Trick is just to do the setup slowly to be sure you do the clicks correctly and make sure the context menu isn't covered.
Title: Re: ScriptUO Heartwood Quester 1.24 with Advanced CLAw support
Post by: Darknite on October 02, 2009, 07:29:17 AM
having a small problem with v1.24
Everything setup great i followed setup instructions ( real easy to setup nice job )
script takes me from my house to heartwood and runs fine
The problem is when i run out of boards the script stops and out says i am out of resources
I have to return myself to house and restart script (not a huge deal since I am running it from work)
Any clue where i went wrong

No uoa
all scripts are on desktop along with euox

also is there way to keep all the loot using bms item evl
Title: Re: ScriptUO Heartwood Quester 1.24 with Advanced CLAw support
Post by: TrailMyx on October 02, 2009, 10:38:21 AM
What are you making?  Bows or stools?  Also, what's the skill of your crafter?

Edit:  I just tested this on my end again for a few cycles.  No problems.  There must be something wrong with your setup or your character configuration.  Give us more detail about your character skills and general setup.
Title: Re: ScriptUO Heartwood Quester 1.24 with Advanced CLAw support
Post by: Darknite on October 02, 2009, 12:20:04 PM
Making bows
gm bowyer

I made one mistake i didnt wait long enough from time i ran out of boards before it starts moving me back to my house
It stops at my recall spot and i stay there

http://i990.photobucket.com/albums/af22/Darknite_02/error.jpg

SO I know i set something up wrong or need to move my recall spot for home

Or should i set it up in my bank box


Title: Re: ScriptUO Heartwood Quester 1.24 with Advanced CLAw support
Post by: TrailMyx on October 02, 2009, 12:25:05 PM
Either spot works fine.  Just be sure you have your rune indexes set correctly.  One time I targeted my runebook (dungeon) and ended up recalling into the blood elemental spawn in Shame.  Ooops.
Title: Re: ScriptUO Heartwood Quester 1.24 with Advanced CLAw support
Post by: Darknite on October 02, 2009, 02:49:08 PM
Ok TM hehe

Reset everything up for home use (will now try bank)

My rune book setup
http://i990.photobucket.com/albums/af22/Darknite_02/Runebook.jpg

It works fine to get me from house to heartwood and doing the quest

I get 2 errors

I run out of supplies the script just stops and waits for me to click ok and move him manually
http://i990.photobucket.com/albums/af22/Darknite_02/error2.jpg

The other was the last post it just stops outside my house
I reset runebook and remarked home rune for a couple steps off my stairs
but i cant test that cuz im still stuck in heartwood with other error

by the way thanks for the help TM
Title: Re: ScriptUO Heartwood Quester 1.24 with Advanced CLAw support
Post by: TrailMyx on October 02, 2009, 02:59:05 PM
Umm, why don't you put a few tinkers tools in your pack?  Also be sure to keep your main pack open.

Have you ever run this script before?
Title: Re: ScriptUO Heartwood Quester 1.24 with Advanced CLAw support
Post by: Darknite on October 02, 2009, 03:11:18 PM
first time running this script today

I have 2 tinker tools in my backpack but no ingots left ill try that.
and pack is open

It works great
ive gotten
2 hwoods
3 yew
1 ash
4 oaks
Title: Re: ScriptUO Heartwood Quester 1.24 with Advanced CLAw support
Post by: TrailMyx on October 02, 2009, 03:53:28 PM
Ya, just keep like 500 ingots in your pack and it'll run forever.
Title: Re: ScriptUO Heartwood Quester 1.24 with Advanced CLAw support
Post by: Dude1598 on October 02, 2009, 03:57:31 PM
TM  I am going to drive you nuts again. I am having the problem again where it spams making smoothing planes. Before I posted this I download 124 and redid setup and still spams making the tools.

Anything you can think of for me to try because I did everything that I could think of and cant think of anything else
Title: Re: ScriptUO Heartwood Quester 1.24 with Advanced CLAw support
Post by: Darknite on October 02, 2009, 04:49:07 PM
thks TM the ingots fixes my main problem

do i need to make a rail from my home rune into my house
Title: Re: ScriptUO Heartwood Quester 1.24 with Advanced CLAw support
Post by: onlyindreams on October 02, 2009, 06:25:08 PM
thks TM the ingots fixes my main problem

do i need to make a rail from my home rune into my house


Mark your home rune within a tile or two of the steps. Within that tile or two radius, put a secure on the steps with wood and the drop off bag inside.
Title: Re: ScriptUO Heartwood Quester 1.24 with Advanced CLAw support
Post by: Darknite on October 03, 2009, 08:32:03 PM
Thks for the suggestion dude1598 that worked great lol
Thks for the help with ingots TM

I have one more question TM
I Got everything to work great
I tried setting it up on a second pc not my main everthing works fine unit we get down to the quest part
It will make the bows but when it cycles threw the quest it misses the simple bow one and just keeps cycling threw the quest and doesnt stop.
 
Has anyone run into that before
Title: Re: ScriptUO Heartwood Quester 1.24 with Advanced CLAw support
Post by: TrailMyx on October 03, 2009, 08:50:15 PM
You're going to have to read back through the thread or the 1.17 thread.  It's a common issue.  Start out with the checklist.  Don't think you've done everything; actually check it off and look into each of the checked items.
Title: Re: ScriptUO Heartwood Quester 1.24 with Advanced CLAw support
Post by: Darknite on October 03, 2009, 08:52:34 PM
Thks tm ill do that  :)
Title: Re: ScriptUO Heartwood Quester 1.24 with Advanced CLAw support
Post by: TrailMyx on October 03, 2009, 08:58:57 PM
Also look at the Q/A sections in each quester thread; saves us from having to answer the same questions over and over again.. ;)
Title: Re: ScriptUO Heartwood Quester 1.24 with Advanced CLAw support
Post by: dodobo on October 05, 2009, 01:00:32 AM
It's so good. :)
Title: Re: ScriptUO Heartwood Quester 1.24 with Advanced CLAw support
Post by: Cerveza on October 05, 2009, 03:36:16 AM
And so off limits to you until you comply with the forum rules and post up a decent intro.
Title: Re: ScriptUO Heartwood Quester 1.24 with Advanced CLAw support
Post by: sdg1017 on October 05, 2009, 09:03:44 AM
I tried to do the quest manually...but my finger starting painful because too much click :'(
I hope i can use this program well..and thanks to the author..
Title: Re: ScriptUO Heartwood Quester 1.24 with Advanced CLAw support
Post by: Cerveza on October 05, 2009, 09:08:47 AM
I tried to do the quest manually...but my finger starting painful because too much click :'(
I hope i can use this program well..and thanks to the author..

And now you have full access to the latest version. Thanks for the great intro.

-Enjoy
Title: Re: ScriptUO Heartwood Quester 1.24 with Advanced CLAw support
Post by: Scrripty on October 05, 2009, 01:07:20 PM
Do you have any documentation detailing adding Claw support to a script?  Or just look at the Heartwood Quester? :)
Title: Re: ScriptUO Heartwood Quester 1.24 with Advanced CLAw support
Post by: TrailMyx on October 05, 2009, 01:26:08 PM
Easiest to just look at the 1.24 quester.  If you look at the CLAw thread, you'll see the interface commands posted as a separate file.  I'd use the 1.24 quester as gospel though.
Title: Re: ScriptUO Heartwood Quester 1.24 with Advanced CLAw support
Post by: Scrripty on October 05, 2009, 03:07:03 PM
Easiest to just look at the 1.24 quester.  If you look at the CLAw thread, you'll see the interface commands posted as a separate file.  I'd use the 1.24 quester as gospel though.

So am I going to need to open corpses myself, then have the looter kick in to evaluate with the set rules?  Cause that's the way I'll have to do it with BM's to make it stable and quit crashing me occasionally and in lots of spawn huh?  Like SPECIFICALLY only loot one corpse, then continue fighting, then loot a corpse...?  Or have you addressed all that and I just need to add support? :)
Title: Re: ScriptUO Heartwood Quester 1.24 with Advanced CLAw support
Post by: TrailMyx on October 05, 2009, 03:10:06 PM
Most has been addressed.  I have added global variables to let your script know when the CLAw is "busy" so you can monitor those variables to make sure you don't try and do something and mess up timing.  You might want to move this over to the CLAw thread so peeps can learn a bit from your experiences.

But yes, open the corpse yourself and pass that ID to the CLAw.  If you look at the 1.24 quester, you'll see what I mean.  You can use the initialization code directly from the quester to prevent using your script without first waiting for the CLAw to initialize.
Title: Re: ScriptUO Heartwood Quester 1.24 with Advanced CLAw support
Post by: sheen on October 06, 2009, 07:34:31 PM
Thanks for this great script TrailMyx!
Title: Re: ScriptUO Heartwood Quester 1.24 with Advanced CLAw support
Post by: Venosa on October 07, 2009, 11:43:23 AM
Awesome can't wait to try this script out. Kudos for updating the script it certainly helps those that have arthiritis. woot.
Title: Re: ScriptUO Heartwood Quester 1.24 with Advanced CLAw support
Post by: bfong5116 on October 07, 2009, 12:09:21 PM
This is great script !
i have never see this script beofre  :o
Title: Re: ScriptUO Heartwood Quester 1.24 with Advanced CLAw support
Post by: Cerveza on October 07, 2009, 12:13:44 PM
Someone else wanna handle this one... I'm beat.
Title: Re: ScriptUO Heartwood Quester 1.24 with Advanced CLAw support
Post by: TrailMyx on October 07, 2009, 12:20:08 PM
Someone else wanna handle this one... I'm beat.

Restriced, blah, blah.  Intro, blah blah.
Title: Re: ScriptUO Heartwood Quester 1.24 with Advanced CLAw support
Post by: smallrr on October 07, 2009, 06:08:38 PM
i used 1.16 before , can it work right now ? :P
Title: Re: ScriptUO Heartwood Quester 1.24 with Advanced CLAw support
Post by: Toptwo on October 07, 2009, 07:11:13 PM
I don't know...can you work right now..and go to the site rules, take a read, then go to the new member page and post up a introduction?
Title: Re: ScriptUO Heartwood Quester 1.24 with Advanced CLAw support
Post by: SunTigress on October 07, 2009, 07:12:45 PM
what he means to say (but doesn't want to catch slack about it) is this:

go here:

http://www.scriptuo.com/index.php?topic=1683.0

and try again
Title: Re: ScriptUO Heartwood Quester 1.24 with Advanced CLAw support
Post by: Toptwo on October 07, 2009, 07:26:33 PM
Someone else wanna handle this one... I'm beat.

Restriced, blah, blah.  Intro, blah blah.

  See what happens when the "site police" takes a half day off!.. Cerv gets all tired, and TM gets even snittier then me!  :)
Title: Re: ScriptUO Heartwood Quester 1.24 with Advanced CLAw support
Post by: cgeorgemo on October 07, 2009, 09:12:02 PM
Cgeorgemo is wondering if TT logged into ST's account and self linked by proxy?   
Hmm?
Cgeorgemo thinks that sounds just sneaky enough to attribute that to that infamous self linker.
Title: Re: ScriptUO Heartwood Quester 1.24 with Advanced CLAw support
Post by: cgeorgemo on October 07, 2009, 09:21:13 PM
Hey TM I was wondering if you'd noticed the little button on the new crafting interface that says "Quest Item".....probably not since you didn't upgrade.....
Well IF you click it everything you make will be a quest item if you have a quest that requires those items.
Sooooooooo if you were to want to say oh I don't know um.....kinda.....what's the word?
"Update?" this script in the future having that button clicked will let you drop a sub that marks the items as quest items in your backpack. If peeps don't have a quest and have that clicked it just makes a regular one anyway.

So you could change the order slightly to

1st get the quest.
2nd craft the bows as quest items
3rd turn in the bows
Goodies

from
1st craft the bows
2nd get the quest
3rd mark the items
4th turn in the quest
Goodies
Title: Re: ScriptUO Heartwood Quester 1.24 with Advanced CLAw support
Post by: TrailMyx on October 07, 2009, 09:32:04 PM
Ya, I'll play with it a bit.  Right now, it's guaranteed to work regardless of whether anyone has that selected or not.  At the moment it's guaranteed to work with anyone, but a little slower.  Coragin has already posted a mod to allow you to take advantage of this "feature".
Title: Re: ScriptUO Heartwood Quester 1.24 with Advanced CLAw support
Post by: Cerveza on October 08, 2009, 05:19:20 AM
Ah, the oldest dilemma in the scripting world.

Should I update this script to work X% quicker if it messes up Y% of it's users?

Careful consideration must be given to that X% and Y%.

Sure, toggle on the button when you start... but what if the button is already toggled?

I'd rather take X% more time per cycle, KNOWING it works solid, then speed the process up by X% and have to listen to Y% people complain.
Title: Re: ScriptUO Heartwood Quester 1.24 with Advanced CLAw support
Post by: NObama on October 11, 2009, 04:34:39 AM
I vote "Stability."

I also submitted TM for a Nobel Peace Prize.  Using this script is like a real life version of "Cloudy with a Chance of Meatballs." 

Runics falling from the sky.

 :)
Title: Re: ScriptUO Heartwood Quester 1.24 with Advanced CLAw support
Post by: Thal on October 11, 2009, 08:02:54 AM
Very nice work
Title: Re: ScriptUO Heartwood Quester 1.24 with Advanced CLAw support
Post by: Abyss on October 11, 2009, 08:06:35 AM
Yeah I'ma start using this one as soon as possible. I had it before from an old site we were both on and I miss running it. You made me alot of money with this :)
Title: Re: ScriptUO Heartwood Quester 1.24 with Advanced CLAw support
Post by: Phoenixxx on October 11, 2009, 10:17:03 PM
ill give a try  ;D :P
Title: Re: ScriptUO Heartwood Quester 1.24 with Advanced CLAw support
Post by: Toptwo on October 12, 2009, 04:46:33 AM
ill give a try  ;D :P
Very nice work

  Its a wonderful script! One of the best ever...and just think, as soon as the two of you actually READ and FOLLOW the rules you can download it and start using it!

http://www.scriptuo.com/index.php?board=55.0
Title: Re: ScriptUO Heartwood Quester 1.24 with Advanced CLAw support
Post by: Fellers on October 14, 2009, 05:52:31 PM
has this script been updated to work with the new SA ?
Title: Re: ScriptUO Heartwood Quester 1.24 with Advanced CLAw support
Post by: TrailMyx on October 14, 2009, 05:58:32 PM
Yup, same issue as 1.17 for tinkers tools, though.  No biggy, just make sure you have a bunch of them in your pack.
Title: Re: ScriptUO Heartwood Quester 1.24 with Advanced CLAw support
Post by: Remaker on October 15, 2009, 10:02:14 PM
i've still yet to DL and try this out... i guess i missed out on the good days of expensive kits tho.  they're down to like 4 mil on GL
Title: Re: ScriptUO Heartwood Quester 1.25 with Advanced CLAw support
Post by: TrailMyx on October 26, 2009, 03:11:43 PM
Updated to 1.25

New to version 1.25:
Title: Re: ScriptUO Heartwood Quester 1.25 with Advanced CLAw support
Post by: paezao on October 29, 2009, 04:49:37 AM
This looks like an awesome script! Im going to give it a try :)
Title: Re: ScriptUO Heartwood Quester 1.25 with Advanced CLAw support
Post by: TrailMyx on November 22, 2009, 01:32:45 AM
For those having issues with errant creation of moulding planes, it's actually trying to make tinkers tools.  So goto line 851 and change:

Code: [Select]
gosub CheckAndCraftItems %tinktools %tinktools ENK 2 1 %maxtinkertools cat_3-sel_4

to this

Code: [Select]
gosub CheckAndCraftItems %tinktools %tinktools ENK 2 1 %maxtinkertools cat_4-sel_4
Title: Re: ScriptUO Heartwood Quester 1.25 with Advanced CLAw support
Post by: Petkiller on November 22, 2009, 04:52:11 AM
Great Script I have used it a lot over the months but when people are selling heartwoods for 1.5 on my shard I kinda of lost heart using it.   The only kits I can sell now are oaks to the imbuers.  It just saves them money making balanced or spell channel starter bows.
Title: Re: ScriptUO Heartwood Quester 1.25 with Advanced CLAw support
Post by: Fellers on November 23, 2009, 04:00:35 PM
THANK YOU SO MUCH TrailMyx for fixing those pesky lil smoothing planes.
Appreciate it!
Title: Re: ScriptUO Heartwood Quester 1.25 with Advanced CLAw support
Post by: TrailMyx on November 23, 2009, 04:29:36 PM
Funny thing is that I thought I had already fixed this, but the change didn't get committed to 1.25.  I have my internal version 1.24 that's the same.  lol.  Oh well, I'll post 1.26 when I get back from Germany.
Title: Re: ScriptUO Heartwood Quester 1.25 with Advanced CLAw support
Post by: NObama on November 24, 2009, 07:00:07 AM
For those having issues with errant creation of moulding planes, it's actually trying to make tinkers tools.  So goto line 851 and change:

Code: [Select]
gosub CheckAndCraftItems %tinktools %tinktools ENK 2 1 %maxtinkertools cat_3-sel_4

to this

Code: [Select]
gosub CheckAndCraftItems %tinktools %tinktools ENK 2 1 %maxtinkertools cat_4-sel_4

*squints really hard at his tiny handheld screen*

umm...is it just me or are those two lines of code exactly the same?

Title: Re: ScriptUO Heartwood Quester 1.25 with Advanced CLAw support
Post by: Cerveza on November 24, 2009, 07:10:14 AM
Code: [Select]
gosub CheckAndCraftItems %tinktools %tinktools ENK 2 1 %maxtinkertools cat_3-sel_4cat_3-sel_4

to this

Code: [Select]
gosub CheckAndCraftItems %tinktools %tinktools ENK 2 1 %maxtinkertools cat_4-sel_4cat_4-sel_4

Quote
*squints really hard at his tiny handheld screen*

umm...is it just me or are those two lines of code exactly the same?

Title: Re: ScriptUO Heartwood Quester 1.25 with Advanced CLAw support
Post by: Paulonius on November 24, 2009, 08:27:01 AM
No, they are not the same. The first is selecting category 3 and the second is selecting category 4
Title: Re: ScriptUO Heartwood Quester 1.25 with Advanced CLAw support
Post by: afkbob on November 28, 2009, 10:05:52 AM
TM,

Hey just wanted to let you know I ran this quester this morning and burned through about 30K boards and ended up with a heartwood runic saw, two yews and a oak runic saw.  Only had one small problem...when I first set it up for the carp quest it kept taking me over to the fletcher instead of the tinker.  I redid the setup a couple of times with the same problem.  I finally ended up closing EUO and restarting it all from scratch.  Worked flawlessly from there.  Going to try the fletch one a little later this afternoon!  Awesome script so far!

I need to mess around with the Advanced CLAW rules this afternoon too...just been running th BMItemEval this morning.  When I loaded the sampleclawsetup.txt file I didn't see any rules pop up.  I am assuming I need to come up with some of my own :)  BMItenEval only looted two items from all those boards and neither were that great...will let you know how I fare with the CLAW.

Title: Re: ScriptUO Heartwood Quester 1.25 with Advanced CLAw support
Post by: Cerveza on November 28, 2009, 10:34:01 AM
Wow, a new user of the Heartwood script - who had a few problems - took the time to figure it out for himself. AND was able to continue to quest, including getting some good runics. He EVEN is motivated to utilize the advanced features of the script!

Bravo to you afkbob! Well done, sir. It's far and few between that we receive GOOD feedback on this particular script. Most is "no work, how fix?" as you'll notice if you read back through all these posts.

It's refreshing to see someone taking the initiative to get it running.

+Karma for you, sir.
Title: Re: ScriptUO Heartwood Quester 1.25 with Advanced CLAw support
Post by: Kazaf on December 01, 2009, 11:45:57 PM
Hi all
this my 1st post on here , can anyone tell me where i can DL the HW quester 1.25?

thanks!
Title: Re: ScriptUO Heartwood Quester 1.25 with Advanced CLAw support
Post by: TrailMyx on December 02, 2009, 01:01:48 AM
Please check out the rules regarding how new users can download scripts.  All your questions will be answered with 5 minutes of reading.

About restriction:
http://www.scriptuo.com/index.php?topic=1750.0

All the rules:
http://www.scriptuo.com/index.php?topic=447.0
Title: Re: ScriptUO Heartwood Quester 1.25 with Advanced CLAw support
Post by: Nellie on December 05, 2009, 01:11:19 PM
Hi all, Please dont yank my head off, I believe i have run through everything i need to, have downloaded the 4 files from the download bit of the 1st page, and the Clawlite thing, and pressed start, I put the locations of my runes in the book, then headed to the bank like the script asked me to, i then followed the instructions and targeted varius things untill the script seemed to be ready. I then pressed start, the script loaded 1560 boardsonto the beetle and stood there and proceeded to make planes, not sure what i did wrong... were all my tools supposed to be in the bank? (ok just tried this, it loaded beetle, put tinker tools and iron into backpack and started flashing up not enough wood to make that).

I know it's probably something really silly i have missed,

Thanks in advance for any help.

Nel
Title: Re: ScriptUO Heartwood Quester 1.25 with Advanced CLAw support
Post by: TrailMyx on December 05, 2009, 01:16:37 PM
You have to change one of the lines.  Haven't had a chance to update yet, but see this post and make the appropriate change:

http://www.scriptuo.com/index.php?topic=374.msg27552#msg27552
Title: Re: ScriptUO Heartwood Quester 1.25 with Advanced CLAw support
Post by: Nellie on December 05, 2009, 02:04:08 PM
*slaps self* yup that did the trick.

thanks again

Nel.
Title: Re: ScriptUO Heartwood Quester 1.26 with Advanced CLAw support
Post by: TrailMyx on December 06, 2009, 09:28:26 AM
Updated to 1.26

New to version 1.26:
Title: Re: ScriptUO Heartwood Quester 1.26 with Advanced CLAw support
Post by: Nellie on December 07, 2009, 01:13:39 AM
Let me start by saying, I have tried and love this script and the fact that it does everything for you and can possibly work 23.5/7/365 if you wanted it to. But i also feel this is it's downfall. Everything it does is the same, there is no randomness (is that even a word?). This script can be seen a mile off and as i value my account i cannot use it in it's current state for long periods of time.

Options to make the script less automated or automated in a different way would be good, i.e. Packy support, ability to keep the bags of stuff you get so you can turn the stuff into residue, ability to self load, make your own way to heartwood, then set the script running, auto offload bags onto the mules your emptying wood off ect.

As you can probalby tell i am not a full auto fan and prefer some interaction with the game so that it requres me to be there for the script to run.

Nel.

Title: Re: ScriptUO Heartwood Quester 1.26 with Advanced CLAw support
Post by: Toptwo on December 07, 2009, 04:25:51 AM
I can tell you that the Elite version of this script has some VERY nice features that the public version does not. Like random endpoints on the rails..and a few other nice variations...Its nice to be Elite!
Title: Re: ScriptUO Heartwood Quester 1.26 with Advanced CLAw support
Post by: Nellie on December 07, 2009, 04:34:30 AM
*Goes to read up on how to become an Elite*

:P

Nel.
Title: Re: ScriptUO Heartwood Quester 1.26 with Advanced CLAw support
Post by: Coragin on December 07, 2009, 05:16:36 AM
TM there is a bug with your runebook subs.  If it tries to recall from home to heartwood and "the location is blocked" it gives a rail error instead of trying again.  I dont know if its supposed to try again, but would be a good idea to add that.
Title: Re: ScriptUO Heartwood Quester 1.26 with Advanced CLAw support
Post by: TrailMyx on December 07, 2009, 06:55:43 AM
Not really a bug with the runbook sub.  There's just no check in the script to sense a failure.  Best thing is just to move your rune.

Additionally, it's a clear sign that you are AFK if you keep trying over and over again to recall when a location has been plugged up with something like a bagball or torso.  I'd still vote to let it die.

My other scripts like the 2.0 quester give you a range of runes to use, so when rune #1 fails, it'll default to the next rune in the range. 
Title: Re: ScriptUO Heartwood Quester 1.26 with Advanced CLAw support
Post by: Coragin on December 08, 2009, 09:45:13 PM
TM I figured out the problem.  ATL runs slow for some reason, not like my main shard.  And well it isint that something is in the way its that when its suposed to be recalling TO Heartwood, its either missing setting default to Heartwood and keeping it at home as default.  Finally I decided to check my runebook after this was happening so much and sure enough, it was still set to home as default.

Questions: Is there any way to slow this down to make sure the gump is in fact open?
I have a good 60 ping to ATL, I dont know why its getting laggy, but does anyone know any tweaks to the uo files to help with that? 

Either way, I think the lag spike is hitting right when its setting runebook to default heartwood.  So how can I slow it down?
Title: Re: ScriptUO Heartwood Quester 1.26 with Advanced CLAw support
Post by: Rn on December 13, 2009, 07:40:04 AM
With the newest pash, targeting your secures causes uo client to crash.
Title: Re: ScriptUO Heartwood Quester 1.26 with Advanced CLAw support
Post by: Rn on December 14, 2009, 04:03:54 PM
With the newest pash, targeting your secures causes uo client to crash.
Looks like this was a problem with easyuo build 160.
Title: Re: ScriptUO Heartwood Quester 1.26 with Advanced CLAw support
Post by: Gimp on December 27, 2009, 10:56:36 AM
This was the first script I used from here, and I can't praise it enough.  It's very intuitive as far as what has been made and qty of resources you have in your pack.  Successes thus far - 5 oak, 4 yew and 3 ash (Just need the heartwood).  Up until this point, I've only succeeded in obtaining an oak and yew, and lost a few more brain cells that I can't spare.

Not only did I get some runic fletching kits, but it also helped in other ways:

- Got to spend quality time with the family watching movies.
- Got exercise from jumping off the couch and running into the computer room when I heard the ringing phone wav!

CLAw is VERY impressive.  It's going to come in really handy once I can get my lazy, good-fer-nuthin fletcher off his hiney to make my ABC archer some new bows to go hunt some meanies.
Title: Re: ScriptUO Heartwood Quester 1.26 with Advanced CLAw support
Post by: Scrripty on December 27, 2009, 12:19:45 PM
Wow, I'll bet you guys never thought the HWQ would allow someone to spend quality time with their family.  KARMA FOR ALL THE DEVELOPERS OF HEARTWOOD/CLAW! :)
Title: Re: ScriptUO Heartwood Quester 1.26 with Advanced CLAw support
Post by: Cerveza on December 27, 2009, 01:10:34 PM
Accepted
Title: Re: ScriptUO Heartwood Quester 1.26 with Advanced CLAw support
Post by: Scrripty on December 27, 2009, 01:53:02 PM
Accepted

I think that should be the slogan for the site.  SUO - Generating quality family time for UO players worldwide... :)
Title: Re: ScriptUO Heartwood Quester 1.26 with Advanced CLAw support
Post by: TrailMyx on December 27, 2009, 01:53:28 PM
Wow, I'll bet you guys never thought the HWQ would allow someone to spend quality time with their family.  KARMA FOR ALL THE DEVELOPERS OF HEARTWOOD/CLAW! :)

Twinkle McNugget has become a true believer in the powers of the CLAw; especially the FULL version where you can make any logical rule and really dial down on the loot you want to grab.  The true benefits of Elite status.  ;)
Title: Re: ScriptUO Heartwood Quester 1.26 with Advanced CLAw support
Post by: NObama on December 27, 2009, 03:17:09 PM
*cries*

It's like this enormous, tasty-looking carrot hanging in front of me.  I reach for it, and then the hidden stick wallops me on the side of the head.  A constellation of tiny stars circles my unconscious form, mocking my pain...mocking...

 :)
Title: Re: ScriptUO Heartwood Quester 1.26 with Advanced CLAw support
Post by: Scrripty on December 27, 2009, 03:41:13 PM
Wow, I'll bet you guys never thought the HWQ would allow someone to spend quality time with their family.  KARMA FOR ALL THE DEVELOPERS OF HEARTWOOD/CLAW! :)

Twinkle McNugget has become a true believer in the powers of the CLAw; especially the FULL version where you can make any logical rule and really dial down on the loot you want to grab.  The true benefits of Elite status.  ;)

Yea but I still can't get -20/-21 mage weapon working right, and I think 4 or less mods on a weapon should be a rule... :)
Title: Re: ScriptUO Heartwood Quester 1.26 with Advanced CLAw support
Post by: TrailMyx on December 27, 2009, 08:31:31 PM

Yea but I still can't get -20/-21 mage weapon working right, and I think 4 or less mods on a weapon should be a rule... :)

I probably won't even fix that.  In fact, I'll probably remove it completely since it's not really a skill intensity.  No sense in having one exception impacting the performance of every other search.
Title: Re: ScriptUO Heartwood Quester 1.26 with Advanced CLAw support
Post by: Scrripty on December 27, 2009, 09:12:38 PM

Yea but I still can't get -20/-21 mage weapon working right, and I think 4 or less mods on a weapon should be a rule... :)

I probably won't even fix that.  In fact, I'll probably remove it completely since it's not really a skill intensity.  No sense in having one exception impacting the performance of every other search.

FIX IT!  Don't remove it cause I DO actually find things that are nice.  Just get -25 and -27 items too. :)
Title: Re: ScriptUO Heartwood Quester 1.26 with Advanced CLAw support
Post by: TrailMyx on December 27, 2009, 10:36:09 PM
FIX IT!  Don't remove it cause I DO actually find things that are nice.  Just get -25 and -27 items too. :)


Well it doesn't make sense to allow for an intensity search for something with a non-standard intensity.  By removing the mage weapon from the intensity search doesn't take away the ability to search for "mage weapon".  It just takes away a little bad advertising.

Actually that's another thing you can try.  Just do a user defined search for "mage weapon -21 skill" and get rid of the other stuff.

But like I said, I'm not going to put into the mix a corner-case bit of logic that will be applied to EVERY rule just to satisfy one little case.  The CLAw has VERY few corner cases at the moment and I'd really like to keep it that way.  Those are the things that'll really slow down overall performance.
Title: Re: ScriptUO Heartwood Quester 1.26 with Advanced CLAw support
Post by: camotbik on December 27, 2009, 11:04:07 PM
Tested today this script, it's little bit slow, but works really great. Thank you.
Title: Re: ScriptUO Heartwood Quester 1.26 with Advanced CLAw support
Post by: Larppa on December 30, 2009, 07:34:58 PM
about to test if i can mod this to work on couple freeshards, i will post if i succeed. CLAw lite has been such a wonderful tool, can't wait to get my hands on full  :D
Title: Re: ScriptUO Heartwood Quester 1.26 with Advanced CLAw support
Post by: ggamangom on January 02, 2010, 05:17:28 PM
Wow,, What a nice script

Thx for ur work, ur my superstar~
Title: Re: ScriptUO Heartwood Quester 1.26 with Advanced CLAw support
Post by: mm_ithink on January 03, 2010, 09:36:47 AM
thxs!!
i been serching that one!
Title: Re: ScriptUO Heartwood Quester 1.26 with Advanced CLAw support
Post by: Khameleon on January 03, 2010, 09:49:07 AM
tm playing around again?
Title: Re: ScriptUO Heartwood Quester 1.26 with Advanced CLAw support
Post by: YewSew on January 03, 2010, 06:34:58 PM
omg this script is amazing!!
Title: Re: ScriptUO Heartwood Quester 1.26 with Advanced CLAw support
Post by: Scrripty on January 03, 2010, 08:21:33 PM
You should see the elite version... :)
Title: Re: ScriptUO Heartwood Quester 1.26 with Advanced CLAw support
Post by: caledion on January 04, 2010, 04:51:30 PM
thank you
Title: Re: ScriptUO Heartwood Quester 1.26 with Advanced CLAw support
Post by: Superslayer on January 04, 2010, 04:53:03 PM
Lol..for?...*cough*
Title: Re: ScriptUO Heartwood Quester 1.26 with Advanced CLAw support
Post by: Khameleon on January 05, 2010, 05:33:38 PM
for letting him read the thread!
Title: Re: ScriptUO Heartwood Quester 1.26 with Advanced CLAw support
Post by: Valeth on January 11, 2010, 02:27:02 PM
Okay, lemme give a brief description of what I have and the problems I'm having.
1. I play on a free server. RunUO. Thats not really my issue because I've repaired the problems stemming from that.

2. I have to use version 1.16 because its the only one that works for me. I have no idea why but neither 1.18 or 1.26 do anything once arriving at the heartwood fletchers. It opens up the crafting menu but does nothing after that point. No clue why it doesnt do anything but I just kinda gave up on it.

3. I'm actually quite happy with version 1.16 but I have ONE problem keeping me from running it flawlessly. The rail out of Heartwood come up about 5 steps short of the gate. After a moment or so, I get the waypoint 0 error gump. After closing it, I get railerror gump. Once I close those, the script recalls to my home and works flawlessly. The problem is that I have to watch the script VERY closely to keep it going. I really just need a little help. How can I get rid of the rail error gumps? If it would just recall home once I got to the end of the railpoint, I would be happy. Or even telling me how to change the rail so that it move up 5 spots would help.

Thanks in advance to anyone that can help.
Title: Re: ScriptUO Heartwood Quester 1.26 with Advanced CLAw support
Post by: Khameleon on January 11, 2010, 02:34:12 PM
I don't believe this is supported for Free shards since so many of them have been altered in some way in order for this script to be fubar.   the crafting menu has been changed on production shards so that is the reason you probbaly can only get the older version to be changed.  as far as your character not reaching the gate, you'd have to look to see if they moved the gate in a different position then osi shards and change the move x y cords.... 
Title: Re: ScriptUO Heartwood Quester 1.26 with Advanced CLAw support
Post by: Valeth on January 11, 2010, 02:43:30 PM
I don't believe this is supported for Free shards since so many of them have been altered in some way in order for this script to be fubar.   the crafting menu has been changed on production shards so that is the reason you probbaly can only get the older version to be changed.  as far as your character not reaching the gate, you'd have to look to see if they moved the gate in a different position then osi shards and change the move x y cords.... 

That makes sense and I'm not asking for a handout but do you think you can kinda point me in the right direction? I know I have to change the x y coords in the tool_railengine.30k text but I have no clue where or how to find the x y coords. Just a hint or tip would be nice and it would help me learn a bit.
Title: Re: ScriptUO Heartwood Quester 1.26 with Advanced CLAw support
Post by: Khameleon on January 11, 2010, 02:47:13 PM
that's one script I dare not to touch.. I learned my lesson after I tried to debug the CLaW....
Title: Re: ScriptUO Heartwood Quester 1.26 with Advanced CLAw support
Post by: Valeth on January 11, 2010, 02:50:33 PM
Ya, I've made rails before for taming using bad maniacs rail maker but looking over the tool_railengine is mindboggling. It just leaves me sitting at the pc while drooling. Remember "Jeffy Dahmer" from the Ringer? Ya, thats how I feel.
Title: Re: ScriptUO Heartwood Quester 1.26 with Advanced CLAw support
Post by: Khameleon on January 11, 2010, 02:59:03 PM
you might be able to use TM's Rail Engine to make your own rail file, and just name it the same.
Title: Re: ScriptUO Heartwood Quester 1.26 with Advanced CLAw support
Post by: TrailMyx on January 11, 2010, 03:06:50 PM
Chances are good that the RunUO server doesn't name the "sparkle" like OSI does. (or may name it differently)  You'll actually have to record rails to enter, and then a separate rail to leave your particular shard.

The OSI quester takes advantage of the name of the "sparkle" to be able to use the same rail in forward and reverse.

There is no railing differences between 1.16 and 1.18.  The only differences are the gump clicking for crafting.  You might double-check to be sure you are using the same rail engine revision and rail files.   RunUO probably still uses the old craft menu design, or you haven't patched your client up to the latest version.
Title: Re: ScriptUO Heartwood Quester 1.26 with Advanced CLAw support
Post by: Valeth on January 11, 2010, 03:09:52 PM
I'll give it my best go. Thanks.
Title: Re: ScriptUO Heartwood Quester 1.26 with Advanced CLAw support
Post by: TrailMyx on January 11, 2010, 03:16:30 PM
One thing to look for is check out the #PROPERTY value of the sparkle going into Heartwood, and then also the one leaving.  Try and find some similarity between the two and use that to modify your script.  Otherwise you'll have to add 2 new rails.  1 really so you can exit.
Title: Re: ScriptUO Heartwood Quester 1.26 with Advanced CLAw support
Post by: Valeth on January 11, 2010, 03:31:08 PM
Thanks TM, I'll keep looking but I gotta be honest with ya..the rail thing is all greek to me. Not sure what to really do. I know you told me but no matter how I read it, I'm lost. It'll take time I guess. Gonna see if I can get it to recall to and from.

*edit* I tried messing around with the TM_RunRail and I think I might be onto something. I was just able to recall directly to the crafting spot and its making bows and turning in quests. Hopefully, it will recall home without any issues. I'll keep you posted.

*edit* Got it working flawlessly with sacred journey. To and from with no hangups whatsoever. Thanks for all the help guys. Just took some time and some research but I'm happy with the results. Thanks for all the hard work you put into this script and for sharing it with players like myself. *tips hat*
Title: Re: ScriptUO Heartwood Quester 1.26 with Advanced CLAw support
Post by: TrailMyx on January 11, 2010, 09:31:23 PM
Glad you were able to figure out out!
Title: Re: ScriptUO Heartwood Quester 1.26 with Advanced CLAw support
Post by: Valeth on January 14, 2010, 08:40:14 PM
Hey TM, I have the lite version of CLaw and its good but I was wondering how someone goes about getting the full version. Does it have to be purchased or what? Just kinda curious as to why only a select few ever mention the full version.
Title: Re: ScriptUO Heartwood Quester 1.26 with Advanced CLAw support
Post by: Cerveza on January 14, 2010, 08:47:59 PM
No scripts on this site will ever be "for sale".

Some scripts are saved for our Elite members. Check out the site info (http://www.scriptuo.com/index.php?board=55.0) for information on how to become and Elite.
Title: Re: ScriptUO Heartwood Quester 1.26 with Advanced CLAw support
Post by: TrailMyx on January 14, 2010, 09:03:33 PM
Just kinda curious as to why only a select few ever mention the full version.

Well there's a huge thread in the Elite section where talk of the FULL CLAw takes place.  When people come out here an discuss it, it's too much like rubbing salt in a wound.  ;)

But the FULL CLAw is very nice.
Title: Re: ScriptUO Heartwood Quester 1.26 with Advanced CLAw support
Post by: Valeth on January 14, 2010, 09:09:49 PM
Thanks for the replies fellas. Guess it goes to show ya how "active" I've really been since joining the site. I think that was the first time I read the rules. I just kinda try to follow the "dont be a douche" rule when I visit here. l really dont have the scripting skills to be an asset but I thank you for your work nonetheless.
Title: Re: ScriptUO Heartwood Quester 1.26 with Advanced CLAw support
Post by: TrailMyx on January 14, 2010, 09:13:30 PM
I may have to add the "dont be a douche" rule to the list!  ROFL.

Anyhow, there's plenty of Elites that don't do much script authoring, but they do contribute in other ways like general UO information, walk-thrus or just generally personable and helpful folk.
Title: Re: ScriptUO Heartwood Quester 1.26 with Advanced CLAw support
Post by: Scrripty on January 14, 2010, 10:35:36 PM
I may have to add the "dont be a douche" rule to the list!  ROFL.

Anyhow, there's plenty of Elites that don't do much script authoring, but they do contribute in other ways like general UO information, walk-thrus or just generally personable and helpful folk.

Not to mention, the full CLAw is worth every minute of not being a douche you can muster! :)  Advanced rules own you.  Can you even begin to imagine how good the lite CLAw would be if you could string all those rules into one rule?  That's the advanced CLAw. :)  I have 11 active rules in my list, and they filter EVERYTHING while getting EVERYTHING that's good. :)  Doesn't miss anything but um, yea, -mage weapon items... but hey, we can hope. :)  BTW, I'm usually a douche, and I can play with the CLAw!  You can do it too!
Title: Re: ScriptUO Heartwood Quester 1.26 with Advanced CLAw support
Post by: dodobo on January 15, 2010, 07:41:50 AM
I'll give it my best go. Thanks. ;)
Title: Re: ScriptUO Heartwood Quester 1.26 with Advanced CLAw support
Post by: Toptwo on January 15, 2010, 07:45:27 AM
I'll give it my best go. Thanks. ;)

If you want to give it your best go, then try READING the site rules, and following them...because until then there will be "no best go" with this (or any other script) on this site.
Title: Re: ScriptUO Heartwood Quester 1.26 with Advanced CLAw support
Post by: Cerveza on January 15, 2010, 08:04:33 AM
After your first post I advised you that this script was
Quote from: Ban Hammer Wielding Cerveza
off limits to you until you comply with the forum rules and post up a decent intro.

Now you post your second, and still no intro. Tsk Tsk...

Comply or be cast out. <- Rush... and Cerveza
Title: Re: ScriptUO Heartwood Quester 1.26 with Advanced CLAw support
Post by: dodobo on January 15, 2010, 10:54:06 PM
Excuse me
I have try to use the edtion 1.18 and 1.26
I meet a problem when I use them.When I peerformed the script program, it can not accept.
the quest and always renew the quest. How can I do or What's wrong with it? Please help me.
Thank you very much.
Title: Re: ScriptUO Heartwood Quester 1.26 with Advanced CLAw support
Post by: Cerveza on January 15, 2010, 11:13:34 PM
Please read this entire post.

Please re-read the first two posts.

Please go through the complete setup again.

If you still have issues, please give us ALL the information. What shard your on, what versions EUO and Quester you are using, what resolution you are using.... etc.
Title: Re: ScriptUO Heartwood Quester 1.26 with Advanced CLAw support
Post by: dodobo on January 16, 2010, 06:43:01 AM
Thank you very much. Cerveza
When change my vedio card form 16-bits to 32-bits,it can work now
Thanks again
Title: Re: ScriptUO Heartwood Quester 1.26 with Advanced CLAw support
Post by: Cerveza on January 16, 2010, 06:48:30 AM
NP, most answers can be found, if you know where to look.
Title: Re: ScriptUO Heartwood Quester 1.26 with Advanced CLAw support
Post by: Valeth on January 16, 2010, 10:19:51 AM
Okay, I'm actually quite satisfied with version 1.16 as thats the only version that works for me but I was wondering if the ScriptUO program could help find the differences between 1.16 and 1.26. For some reason both 1.18 and 1.26 stop working once I get to Heartwood and it opens the fletching menu. I just want to get a taste of the CLaw program built into 1.26 and because its still being supported. 1.16 does well but I cant get the BM looter to pick up anything even with the settings on say 6 and I know that after pending countless hours there, I've had to of passed up some good jewelry. Also, my character will not pick up the ingots from my secure meaning I have to load up like 700 ingots in my main pack before starting the script.
Title: Re: ScriptUO Heartwood Quester 1.26 with Advanced CLAw support
Post by: TrailMyx on January 16, 2010, 10:23:21 AM
I can post the previous version of this script that doesn't require the new OSI crafting menu.  I think that was version 1.24.  If you have TortoiseSVN and ScriptUO installed, you can easily determine the differences for your own edification.   ;)  
Title: Re: ScriptUO Heartwood Quester 1.26 with Advanced CLAw support
Post by: Valeth on January 16, 2010, 10:27:06 AM
I can post the previous version of this script that doesn't require the new OSI crafting menu.  I think that was version 1.24. 

That would be fantastic TM. I hate to keep troubling you but this is by far the best script I've ever used and I've been even more pleased with it after being able to get it to recall to and from Heartwood. You'd be suprised how much time is saved when your server doesnt require the rails.
Title: Re: ScriptUO Heartwood Quester 1.26 with Advanced CLAw support
Post by: TrailMyx on January 16, 2010, 10:29:40 AM

That would be fantastic TM. I hate to keep troubling you but this is by far the best script I've ever used and I've been even more pleased with it after being able to get it to recall to and from Heartwood. You'd be suprised how much time is saved when your server doesnt require the rails.

Unfortunately with OSI, the railing is a necessity.  At least you were one of the rare few peeps able to get it working on a freeshard.

124 added to the first post
Title: Re: ScriptUO Heartwood Quester 1.26 with Advanced CLAw support
Post by: Valeth on January 16, 2010, 10:37:49 AM
Thank you TM. I'm at work for another 3 hours but I went ahead and downloaded it to a flashdrive. I'll check it when I get home and let you know how it does.

*Update* Its doing the same thing as version 1.26. Starting it off, I only had 1 fletchers tool in my main pack. It went to make more but the menu pretty much flashed. Nothing happened. I went ahead and helped the script out by making some and restarting. I then got a message about no more tinker tools. I added KTL to the #tinktools and got past that point. I went to the setup and got everything done as far as my book, the bags, and secure and saved it. I then hit play. It worked until it recalled to heartwood. At which point it wanted to run the setup again. Not sure whats going on but I'll keep working at it or perhaps try copying the CLAw comments in 1.24 and moving them into 1.16 and see what happens.
Title: Re: ScriptUO Heartwood Quester 1.26 with Advanced CLAw support
Post by: Malcate on January 25, 2010, 06:35:30 AM
I'm having problems with this script. Is there a full FAQ on how to do everything?
Title: Re: ScriptUO Heartwood Quester 1.26 with Advanced CLAw support
Post by: Cerveza on January 25, 2010, 06:44:56 AM
I'm having problems with this script. Is there a full FAQ on how to do everything?

Yes, you just posted towards the end of it.
Title: Re: ScriptUO Heartwood Quester 1.26 with Advanced CLAw support
Post by: Coragin on January 25, 2010, 07:29:17 AM
I'm having problems with this script. Is there a full FAQ on how to do everything?

Yes, you just posted towards the end of it.

LOL
Title: Re: ScriptUO Heartwood Quester 1.26 with Advanced CLAw support
Post by: SnoWolf on January 25, 2010, 05:35:36 PM
Making a post so i can check this script out, i hope it works. :D
Title: Re: ScriptUO Heartwood Quester 1.26 with Advanced CLAw support
Post by: onlyindreams on January 25, 2010, 05:48:04 PM
Making a post so i can check this script out, i hope it works. :D

I LOL'd... literally.

http://www.scriptuo.com/index.php?topic=447.0

and

http://www.scriptuo.com/index.php?topic=1750.0
Title: Re: ScriptUO Heartwood Quester 1.26 with Advanced CLAw support
Post by: romaa__ on January 25, 2010, 06:33:35 PM
How can I download this script?
Title: Re: ScriptUO Heartwood Quester 1.26 with Advanced CLAw support
Post by: NObama on January 25, 2010, 07:40:11 PM
How can I download this script?

You could start by reading the RULES:  http://www.scriptuo.com/index.php?topic=447.0

Negative karma for not trying to solve your problem on your own.  Just be glad I found you before TopTwo did...

Title: Re: ScriptUO Heartwood Quester 1.26 with Advanced CLAw support
Post by: Toptwo on January 26, 2010, 04:44:18 AM
Damn 'Bama...your taking all my fun away!
Title: Re: ScriptUO Heartwood Quester 1.26 with Advanced CLAw support
Post by: UOMaddog on January 26, 2010, 08:17:02 PM
thanks :D

Duh Duh Duh! Another one bites the dust! Ba duh duh duh! Another one bites the dust!

And another one gone....

Ok I think you get the point!
Title: Re: ScriptUO Heartwood Quester 1.26 with Advanced CLAw support
Post by: Fellers on January 30, 2010, 11:49:53 PM
Lol , off topic. But, NICE apple pad. hahahah
Title: Re: ScriptUO Heartwood Quester 1.26 with Advanced CLAw support
Post by: EekAMacro on February 18, 2010, 07:45:08 AM
hi there, I wanted to ask something. Since I'm using the quester while also training fletching, I wanted to change the quest type to making crossbows. Now, everything on how I should do it is clear to me, only thing I'd need is the crossbow ID that I should put on setup section in script instead of "WOH"; also I would love to figure out, if anyone can illuminate me, on how one can discover items IDs, thx everybody. ps: sorry 4 my english
Title: Re: ScriptUO Heartwood Quester 1.26 with Advanced CLAw support
Post by: Paulonius on February 18, 2010, 07:51:31 AM
Your English is fine.  When you have an open EUO window, doesn't matter if its running a script, make sure it is on the toon you are using by expanding the "Status Bar" Plus sign in the right side inset window of EUO.  You can confirm that it is the right one when you see that the value for #CHARNAME matches the name of your character. Go ahead and close the Status Bar info by hitting the - sign.  Now open the "Last Action" tab by hitting the associated plus sign.  Under this tab there is a value for #LLiftedType:  The value here will be the item type of the last item you lifted with that character.  Lift up a crossbow and it will give you the item type.  Be sure to use a crafted crossbow, as creature spawned bows sometimes have different item types. 

Post again if you have any more questions. 
Title: Re: ScriptUO Heartwood Quester 1.26 with Advanced CLAw support
Post by: EekAMacro on February 18, 2010, 04:48:34 PM
great! thanks! now I have a much more understanding of all this scripting stuff :)
Title: Re: ScriptUO Heartwood Quester 1.26 with Advanced CLAw support
Post by: EekAMacro on February 23, 2010, 05:26:45 AM
ok, just in case anyone here is as ignorant as me in scripting (which I strongly doubt), I'd like to post the modifications of the script if anyone needs changing quest instead of a simple bow, perhaps to train fletching like I did.
First of all, in "setup subs" sections you have to change set %QUEST_A_Simple_Bow 6641256 in:
set %QUEST_Ingenious_Archery_Part_I 18138596
set %QUEST_Ingenious_Archery_Part_II 19715376
set %QUEST_Ingenious_Archery_Part_III 21307596
You obviously know that part I is xbows, II is heavy xbows, III is repeating xbows.

Now just go up and find "Fletching Setup"
Here you can change  "set %string %QUEST_A_Simple_Bow" and write the new quest ID (without the numbers) and then in "set %craftitemchain cat_4-sel_1" you change the last number in "2" for xbows, "3" heavies, "5" repeating (cat 4 means the fourth category in fletching crafting menu, which is weapons, sel_"x" is the selection of the menu on the right)

Now change "set %item WOH" and you have to change the item ID: WOH means bows, JSF means xbows, LMH means heavy xbow, PPO is for repeating.

Don't change craftitemchain tool, I thought I had to put the same number of craftitem chain, and then I found my char with a backpack full of mapmaker tools. Basically, this string identifies makes you craft fletching tools.

I know it may not be so useful, but I just wanted to contribute in some way
Title: Re: ScriptUO Heartwood Quester 1.26 with Advanced CLAw support
Post by: Paulonius on February 23, 2010, 06:43:11 AM
I think that was probably somewhere in this thread already, but I am sure everyone will appreciate you taking the initiative to figure it out and you did a great job explaining it. 

Nice work!
Title: Re: ScriptUO Heartwood Quester 1.26 with Advanced CLAw support
Post by: Belthon on February 27, 2010, 02:01:16 PM
Wow.....just WoW  :o

When I last dabbled in scripts  it was impressive to have it pull resources out of a secure, people started posting rails and it warped my mind.  It took me about an hour and a half to get this working for me but when it did....whoa.. thats impressive.

..all though it loots so fast and the trash can empties so fast, if it ever got a runic and trashed it I probally would miss it.  It is supposed to hold the runic kits right? 

.. /tosses another round of applause
thanks for this

Post Merge: February 27, 2010, 03:45:12 PM
nm..........chalk up one oak runic kit ::)
Title: Re: ScriptUO Heartwood Quester 1.26 with Advanced CLAw support
Post by: Toptwo on February 28, 2010, 04:15:30 AM
Wow.....just WoW  :o

 It took me about an hour and a half to get this working for me but when it did....whoa.. thats impressive.

.. /tosses another round of applause
thanks for this

Post Merge: February 27, 2010, 03:45:12 PM
nm..........chalk up one oak runic kit ::)

 I am gonna toss you a round of applause...an hour and a half and YOU got it working for yourself. I sure wish the multitudes would try to do the same before they come here and cry!!!  +1 Karma for you sir!
Title: Re: ScriptUO Heartwood Quester 1.26 with Advanced CLAw support
Post by: Belthon on February 28, 2010, 04:01:47 PM
Nah, I'm sure it was just dumb luck...it started comming back to me a tad...not that I could ever write any decent script, but used to play around modifying them some.  But thanks  ;D
Title: Re: ScriptUO Heartwood Quester 1.26 with Advanced CLAw support
Post by: Hoby on March 20, 2010, 11:15:21 AM
alright, burned through 35k in boards and it was working fine, now for some reason when it marks the items as a quest item, it marks all ten but for some reason the i still get the gump that says you dont have enough of the items come back when u do, or something like that.  i unmarked a bow then remarked it and it accepted them.  Its the simple bow quest, osi shard. 
Title: Re: ScriptUO Heartwood Quester 1.26 with Advanced CLAw support
Post by: TrailMyx on April 06, 2010, 07:31:19 PM
Everyone will find that the quester no longer works with the last patch.  I've got it fixed, but it's under test now in Elite.  Stay tuned.
Title: Re: ScriptUO Heartwood Quester 1.27 with Advanced CLAw support
Post by: TrailMyx on April 07, 2010, 08:11:21 AM
Updated to use the new craft gump and also addressed the changes in location of the quest text information.

Look for version 1.27
Title: Re: ScriptUO Heartwood Quester 1.27 with Advanced CLAw support
Post by: Nidael on May 04, 2010, 09:10:46 PM
good post! :)
Title: Re: ScriptUO Heartwood Quester 1.27 with Advanced CLAw support
Post by: Toptwo on May 05, 2010, 04:02:17 AM
good post! :)

Not a good post!!! Try reading the site rules and posting up a real introduction.
Title: Re: ScriptUO Heartwood Quester 1.27 with Advanced CLAw support
Post by: Malcate on May 17, 2010, 11:38:01 AM
It is running fine when I do the fletching one, but I keep getting rail errors right after gating to HW while trying to use the carpentry version.
Title: Re: ScriptUO Heartwood Quester 1.27 with Advanced CLAw support
Post by: TrailMyx on May 17, 2010, 12:28:18 PM
It is running fine when I do the fletching one, but I keep getting rail errors right after gating to HW while trying to use the carpentry version.

Works fine here.  What are you doing while it's railing?
Title: Re: ScriptUO Heartwood Quester 1.27 with Advanced CLAw support
Post by: Malcate on May 17, 2010, 12:29:41 PM
Nothing. Not touching mouse, running the 1.27 version, no UOA opened.

I open a gate to HW, and without moving I get a rail error once I pop through it.
Title: Re: ScriptUO Heartwood Quester 1.27 with Advanced CLAw support
Post by: TrailMyx on May 17, 2010, 12:34:29 PM
Unsure then.  There's not really much different between the two rails, especially how they start.  They end up in different places, but that's just different waypoints.  You might try re-downloading the rails or changing where you rune is marked.
Title: Re: ScriptUO Heartwood Quester 1.27 with Advanced CLAw support
Post by: Cerveza on May 17, 2010, 12:34:43 PM
Mark a different spot at the gate and try it again?
Title: Re: ScriptUO Heartwood Quester 1.27 with Advanced CLAw support
Post by: TrailMyx on May 17, 2010, 12:39:31 PM
I'm running 1.27 right now to the carpentry quest.  No issues.....  Why are you gating anyhow?
Title: Re: ScriptUO Heartwood Quester 1.27 with Advanced CLAw support
Post by: onlyindreams on May 17, 2010, 01:45:45 PM
I'm running 1.27 right now to the carpentry quest.  No issues.....  Why are you gating anyhow?

Isn't Siege gate only?
Title: Re: ScriptUO Heartwood Quester 1.27 with Advanced CLAw support
Post by: gargamell on June 17, 2010, 11:53:00 AM
Can't wait to try this out!
Title: Re: ScriptUO Heartwood Quester 1.27 with Advanced CLAw support
Post by: jilber on June 24, 2010, 07:36:51 AM
im having a problem,
script doesnt load my beetle. i  selected secure bag which has  boards in it. but when i start it doesnt loads the beetle and without having boards my crafter hits the road :P

i ve changed only exevent popup %beetle to exevent popup %beetle 11 so when targeting beetle script doesnt release the beetle, otherwise it does.

i see  a massege that container cannot hold more weight on the screen....

Prolly im doing something wrong in the setup but dunno what...
1 i selected a secure bag
2 i ve selected a another bag inside the secure bag
3 all materials are in main level of secure bag
4 i ve selected loot bag in my main bag
5 i ve selected the runebook
6 i ve selected the beetle ... what am i doing wrong :(

but as i ve seid boards havent been loaded by the script....
Title: Re: ScriptUO Heartwood Quester 1.27 with Advanced CLAw support
Post by: Cerveza on June 24, 2010, 07:54:38 AM
If it's trying to release the beetle, it sounds like the location may have changed on the beetle menu.
Title: Re: ScriptUO Heartwood Quester 1.27 with Advanced CLAw support
Post by: jilber on June 24, 2010, 08:14:47 AM
prolly something wrong with the beetle huh? script tries to load logs somewhere else maybe thats why i see container cannot hold more weight massege....

what do you think?
Title: Re: ScriptUO Heartwood Quester 1.27 with Advanced CLAw support
Post by: Cerveza on June 24, 2010, 08:16:27 AM
If it's trying to release the beetle then it's clicking the wrong thing on the beetle's context menu.

Try running it and using F7 to step through, you'll see the exact line that is trying to release your beetle. Get that info and post it up.
Title: Re: ScriptUO Heartwood Quester 1.27 with Advanced CLAw support
Post by: jilber on June 24, 2010, 08:46:42 AM
  finditem #charid G_20
  set #lobjectid #findid
  wait 5
  event macro 17 0
  wait 20
  display Target Your Beetle
  wait 1
  set #targcurs 1               *****
  target
  while #targcurs = 1           ******
    wait 0
  set %beetle #ltargetid       ******one of these lines cousing i think
  wait 5
  finditem VRD c_ , #backpackID
  if #findkind <> -1
  {
    gosub DragItem #FINDID 1 C %beetle
  }
  exevent popup %beetle
  gosub GumpWait normal_gump normal_gump
  click 50 180
Title: Re: ScriptUO Heartwood Quester 1.27 with Advanced CLAw support
Post by: Cerveza on June 24, 2010, 08:55:04 AM
Code: [Select]
  gosub GumpWait normal_gump normal_gump
  click 50 180

That's the click to open the beetles pack. It may be that it's clicking the wrong position and trying to release your beetle.

You can check it by keeping EasyUO visible on your screen with the x and y mouse coords visible (on the right side of EUO), then "hover" your mouse over the RELEASE on the beetle's context screen. See if it's something close to 50 180, then "hover" over the OPEN PACK and see what the difference is.
Title: Re: ScriptUO Heartwood Quester 1.27 with Advanced CLAw support
Post by: TrailMyx on June 24, 2010, 09:43:27 AM
Also remember this script isn't meant to work on a freeshard.... ;)
Title: Re: ScriptUO Heartwood Quester 1.27 with Advanced CLAw support
Post by: jilber on June 24, 2010, 10:29:24 AM
i will check it

im not on freeshard..

thank u for ur time btw
Title: Re: ScriptUO Heartwood Quester 1.27 with Advanced CLAw support
Post by: Cerveza on June 24, 2010, 10:34:29 AM
NP, check that location that it's clicking, that's what it sounds like to me. It's just offset by a spot or something, easily fixed.
Title: Re: ScriptUO Heartwood Quester 1.27 with Advanced CLAw support
Post by: gargamell on June 26, 2010, 11:12:59 PM
While I couldn't get 1.27 to work on the freeshard I'm on, v1.16 works great if the item codes are replaced!  Thank you so much.  The script is amazingly fast, and has netted me several heartwood runics already.  The only flaw I've noticed is sometimes too many bows/stools are made.  These leftovers then just sit in the pack, and eventually force me overweight.  Also, after seeing some of the other posts, I managed to clear up issues with using rails (as I can recall right into Heartwood) and added various slayer talismans to the loot it will pick up.

The other thing I've been trying to do is the lethal darts quest (which, I tried using the code from 1.19, but it would seem that is the incorrect code on this shard.  Not your fault, that's all on me).  It got me wondering, as I saw in previous posts about viewing the code in the journal.  I'm going to play around with it a little bit.  There is no timer on that particular quest, and scripting is ok, so I'll let you know if I do manage to get it working.  (Really, I had everything working except for quest selection)  And if that works, I may attempt the tinkertool quest in hopes of the elusive scrappers recipe.

Once again, thank you for your hard work on the script.  It is a real saver on my fingers/wrist!
Title: Re: ScriptUO Heartwood Quester 1.27 with Advanced CLAw support
Post by: kimdongjin on July 10, 2010, 04:40:21 PM
죄다 영어라 모르겠다! :'(
Title: Re: ScriptUO Heartwood Quester 1.27 with Advanced CLAw support
Post by: Cerveza on July 11, 2010, 05:59:00 AM
미안 해요,하지만 우리는 여기에 영어를 사용합니다.

아마 당신이 번역기를 사용할 수 있습니다. 여기에 (http://www.google.com/language_tools?hl=en) 대한 링크가 있습니다.
Title: Re: ScriptUO Heartwood Quester 1.27 with Advanced CLAw support
Post by: NObama on July 11, 2010, 08:23:50 AM
!░░░░░░░░░░░░░░░▒░░░░░░░░░░░▒░░░░░░░░░░░░░░░░░░░░░░░░░░
░░░░░░░░░░░░░░░░░▒▒▒░░░░░░░░░░░░░░░░░█░░░░░░░░░░░░░░░░░
░░░░░░░░▒░▒▒░▒▒▓░▓▓▓▒▒▒▒░░░░░░▒░░░░░░██▓░░░░░░░░░░░░░░░
░░░░░░░░▒▒▒▒░░▒▒▒░▓▓▒▒▒░░░░░░░░░░░░░░░██▓░░░░░░░░░░░░░░
░░░░░░░▒▒▒░▒░░▒░▒░▒▓▓▓▓▒░░░░░░░░░░░▒░▒░▓█▓░░░▒░░░░░░░░░
░░░▒▒░░▓▒▒▒░░░▒░░▒░░▓▓▓▒▒▒░░░░▒▒▒▒▒▒▒░▒▒▓█▒░▒░▒░░░░░░░░
░░░▒▒░░▓▒▒▒░░░▒░░░▒░▒▓▓▒▒▒▒▒▒▒░▒▒▒▒░▒▒▓▓▓▓█░█▒░▒░░░░░░░
▓░░▒▓▒░▒▒▒▒▒░░░░░▒▒▒▒▓▓▒▒▓▓▓▒░▓▒░░▓▓███████▓▒█▒░▒░░▒░░░
▓░░▒▓▓▒▒░░░▒▒░░░░░▒▒▓▓▓▓▓▓▓▒▓▓▒░▓███████████░█▓░░▒░░▓░░
▓░░▓▓▒▒░▒░░░░░░░░░▒▒▒▓█▓█▓▓▓▓▒▓████▓▓███████▓░▓▒░░▒░░▒░
▒█░▓▓▒░░▒░░░░░░░░░░░░░▓▓▓▓▓▓▓████▓░░░▒▓██████░▓▓▒░░▒░░░
░█░▓▓░░░▒░░░░░░░░░░░░▒▓██████████▓░░░░▓██████░▒▓▓▒░▒░░░
░█▓▓▓███████████▓▓▓▒▓███▓██████████▓▓▓██████▒░░░▒▓░░▒░░
▒██░███████████████████░░░░░░░▒▒▓▓██████▓▓▒░░░░▒▒█▒░▒░░
▓██▒▓███▓▒░░▒█████████▓░░░░░░░░░░░░░░░░░░░░░░░▒░░█▓░░▒░
▓▓▓█▒███▓░░░░▓███▓▓▓▓▓▓░░░░░░░░░░░░░░░░░░░░░░░░░░▓█▒░▒░
▓▓▒██▒▓███▓▓██▓▒░▒▓▓▒▓█░▓▒██▓░░░░░░░░░░░░░░░░░░▒▒▓██░░░
▓█▓▓████████▓▒░░░▒▒▒▒▓▓▓███████▓▒▒▒▒░░░░░░▓▓░█▓▒▓▓██▒░░
▓██▓▒▒▓▓▓▓▓░░░░░▒░░▓▓▒▓███░▓████▒░░▒▒▒▒▒▓▓▒▓▓▒█▒▓▓▓█▓░░
▓█▓▓▓▒▒░░░░░░░▒▒░░▓▓▒▓███▓░░▒▓▒▓░░░░░░▒▒▓██▓▓▒▓▓▓▓▓██░░
▓█▓▒░▒░░░░░░▒█▓░░▓░▒▓█▓▒▓▒░▓░░░░░░░░░░░▒████▓▓▓▓▓▓▓█▓▒░
▓█▓▓▓▓▒░░░▒██▓░▓▓░▒█▒▓▒░░░░▒░░░░░░░▒▓████▒▓█▓▓▒▓▓▓▓▓▓▒░
▓▓█▓▓▓░░░▓██▓▓▓▓▓▓▓▓░▒▒░░░░░░░░░▓█████▓██▒░█▒▓░▓▓▓▓▓▓▓░
▒▓███▓▓▓▓██▓▓██▓██▒▓▓▓▓▓░▒▒▓████████░░░▒█▓▒█▒░░▓▓▓▓▓▓▓░
░▓▓████▓▓▓█▓██████▓███████▓████▒░▓██▒░▒░▓█▓█░░░▓▓▓▓▓▓▓░
░▒▒█████▓▓█▓▓██████▓█▓████░░███░░░███░░▒░███░▒▒▓▓▓█▓▓▓▒
░▓░▓█████▒▓█▓▓██▓█▓▓▒▒▒███░░▓██▓░░▓██▓░▒░▓██░▒▒▓▓█▓▓▓▓▒
░░▓░▓█████▒▓▓▓▓█▓██▒░▒░▓██▓░░███░░░███░░▒░██░░▒▓▓█▓▓▓▓▒
░░▓▓▒██████▓▓█▓▓███▓░░░░███░░▓██▒░░▓██▓░▒░▓▓░░▓▓██▓▓▓▓▒
▒░▒▓▓▓██████▓▓█▓▓███░░▒░▓██▒░░██▓░░░██▓░░▒▓░░░▓▓█▓▓▓▓▓▒
▒░░▓▓▓▓▓█████▓██▒▒███░▒░░██▓░░▓█▓░░░░░▒░░▓▓░░░▒▓█▓▓▓▓▒▒
▒░░░▓▒▓▓▓█▓███▓█▓▒▒██░░▒░▓█▓░░░░▓░░░░░▓░░▓▓░░░▒▓█▓▓▓▓▒▒
▓░░░▓▓▒▓▓██▓█████▓▒▒█▓░░░░░▓░░░░▓▒░░░░░▓░▓▒▒░░▓██▓▓▓▓▒▒
▒▒░░░▓░▓▓▓██▓█████▓▓▓██▓▓░░▓▒░░░░█░░░░░▒▓▒▓░░░▓██▓▓▒▒▒░
▒▓░░░▒▓░█▓▓▓▓▓▓███▓▓▓▓███▓░░▓░░░░▒▒░░░░▒▓▓▓░░░▓█▓▓▓▒▒▒▒
░▓▒░░░▓▒▓█▓▓▓▓▓▓████▓▓▓███▓▒▓▓░░░░█▒▒▒▒▒▓▓░░░░▓█▓▓▓▒▒░▒
░▒█░░░░▓░▓▓▓▓▓▓▓▓▓███▓▓▓███▓▓▓▓▓▓▓▓▓▓▒░▓▓░░░░▒█▓▓▓▓▒▒░░
▒░█▒░░░▒▓░█▓▓▒▓▓▓▓▓███▓▓▓▓███▓▓▓▓▓▓▓▓▓▓█▓░░░░▓█▓▓▓▓▒▒░░
▒░▒▓░░░░▓▒▓▓▓▓▒▓▓▓▓▓████▓▓▓▓███████▓▓▓▒▒░░░░░▓█▓▓▓▓▒▒░░
░░░▓▒░░░░▓▒▓▓▓▓▒▓▓▓▓▓█████▓▓▒▓▓▓▓▒▓▓▒░░░░░░░░█▓▒▓▓▒░▒░░
░░░░█░░░░▒▓▒▓▓▓▒▒▓▓▓▓▓██████▒▒▒▓░░░░░░░░░░░░▓█▓▒▓▓▒░▒░░
░░░░▓▓░░░░▒▒▒▓▒▒▒▒▓▓▓▒▓██████▓░░░░░░░░░░░░░░▓█▒▒▓▓▒░▒░░
░░░▒░█▒░░░░▒▒▒▓▒▒▒▒▓▓▓▒▓█▓▓████▓░░░░░▓█▓█▒▓▓▓▓░▓▓▓▒░▒░░
▒░░░▒▒█░░░░░▒▒▒▓▒▒▒░▓▓▒▒▒█▓▓████████████████▓▒░▒▓▒▒░▒░░
▓░░░░▒██░░░░░▒▒▒▓▒▒▒░▓▓▒▒▓█▓▓██████████████▓▓▒░▒▓▒▒░▒▒░
▓▒░░░░▒▓▒░░░░░▒░░▒░▒▒░▒▓▒▒▓▓▓▓▓██▓▓██▓▓▓▓▓▓▓▒░░▒▒▒░░
Title: Re: ScriptUO Heartwood Quester 1.27 with Advanced CLAw support
Post by: TrailMyx on July 11, 2010, 02:23:28 PM
Posted version 1.28

New to version 1.28:
Title: Re: ScriptUO Heartwood Quester 1.28 with Advanced CLAw support
Post by: Voemon on July 14, 2010, 11:37:27 PM
Hi all,
What about using the script on a freeshard osi style? however it seem's a really goooood scripting work!!!!


...and sorry for my english.
Title: Re: ScriptUO Heartwood Quester 1.28 with Advanced CLAw support
Post by: Scrripty on July 15, 2010, 03:51:50 AM
Hi all,
What about using the script on a freeshard osi style? however it seem's a really goooood scripting work!!!!


...and sorry for my english.

Psst... You're "restricted" at the moment... if only you'd follow the rules you'd be able to download...  At least you're humble. :)
Title: Re: ScriptUO Heartwood Quester 1.28 with Advanced CLAw support
Post by: Voemon on July 15, 2010, 04:04:33 AM
i know, but u said the script won't work on freeshards, i was interested to know if that script can work on a freeshard osi style. now i'm going to read the rules ;)
Title: Re: ScriptUO Heartwood Quester 1.28 with Advanced CLAw support
Post by: teruteru17 on July 16, 2010, 07:54:24 AM
Hello.
so cool script!
but I want to skip to take ork and ash runics, so what part of this script do i have to re-write?
Title: Re: ScriptUO Heartwood Quester 1.28 with Advanced CLAw support
Post by: TrailMyx on August 04, 2010, 03:11:45 PM
BTW, the beetle setup is borked until Cheffe figures out a way to enable the exevent popup feature in EUO.  EA/OSI broke it somehow.

In the mean time, you may have to help the script open the beetle pack when running the guided setup.  During Guided setup, the script will seem to hang at the beetle pack selection phase.  Just context click the beetle to bring up the context menu.  Don't select anything because the script will take over and continue.  Be sure to save your setup when you are done.

If you already have your beetle pack saved from a previous run, then things should work fine.  

Also:  remember if your beetle dies, then you'll have to re-run this guided setup with the above "helper" advice.
Title: Re: ScriptUO Heartwood Quester 1.28 with Advanced CLAw support
Post by: Khameleon on August 25, 2010, 04:33:29 PM
actually tm... I think they added an option in the bugs menu, you might have to relocate the click x/y locations... every time I do it on the jacker it wants to release my bug ;P
Title: Re: ScriptUO Heartwood Quester 1.28 with Advanced CLAw support
Post by: Cerveza on August 25, 2010, 04:36:52 PM
Here's how you can identify/fix that Kham....

Find the spot where it happens.... it'll have the beetle gump open.

Open a new tab in EUO and type

contpos 0 0
halt

And run that.

It'll move the container to position 0, 0 on your screen.

Hover your mouse over the button you want to press.... check the right side of EUO for the cursorX and cursorY. This will show you where you actually want to click. See if it matches what's in the script and fix it if it's changed.
Title: Re: ScriptUO Heartwood Quester 1.28 with Advanced CLAw support
Post by: TrailMyx on August 25, 2010, 04:42:12 PM
Umm, well the problem is that event popup just doesn't work.  Nothing pops up.  Trust me, I've tested this thru and thru.  

Plus I think I added OCR to the 1.28 version of the quester so that even if they move the selection, it will adapt.  Just need to get that context window open...

My original suggestion works just fine.  Do guided setup, wait for when it's trying to open the beetle pack.  Help it a bit my initiating the context menu, but don't select.  The script will take over.  Be sure to save, and you won't have to worry about it again until your beetle dies or is replaced forcing you to refresh the beetle pack information.

Edit:  Whoops, didn't realize we were talking about the beetlejacker in the heartwood thread.  Cerveza's idea should work for the beetlejacker until I can get off my lazy butt and post the newerr version of the bjacker.
Title: Re: ScriptUO Heartwood Quester 1.28 with Advanced CLAw support
Post by: TrailMyx on August 25, 2010, 04:48:24 PM
Yup, OCR is in there just like the 2.0 quester:

Code: [Select]
...
  gosub HandleContextMenu NULL %beetle %CONTEXT_Open_Backpack
  wait 5
  set %beetlepack #contid
  finditem %beetle g_2
  if #findkind = -1
  {

....

Please PM Cheffe and have him fix exevent popup.  :)  Or UO broke it.  It's just broke.

actually tm... I think they added an option in the bugs menu, you might have to relocate the click x/y locations... every time I do it on the jacker it wants to release my bug ;P

Kham, I have a new version of the beetlejacker that also has the OCR; I just haven't posted it.....  So for your case, it won't pop up AND it'll select the wrong spot. 

Sorry, I got confused with the threads, I thought we were talking about the quester..   Sheesh.  Don't confuse me, I'm hangin by a thread of sanity at the moment.  ;)
Title: Re: ScriptUO Heartwood Quester 1.28 with Advanced CLAw support
Post by: Khameleon on August 26, 2010, 12:56:59 AM
no, no.. I was just talking about the Beetles Contex Menu in general... I think they added a something into the menu that pushed the Open Backpack option down 1 slot.... I'm not sure how long ago, but there is a Rename Option now, which push's most of the option down one...
Title: Re: ScriptUO Heartwood Quester 1.28 with Advanced CLAw support
Post by: TrailMyx on August 26, 2010, 07:53:21 AM
Ya I fixed that a while ago in some of the scripts.  Just hadn't gotten around to publishing the bjacker.  But 1.28 quester was fixed nicely for a while until the exevent popup thingy broke.
Title: Re: ScriptUO Heartwood Quester 1.28 with Advanced CLAw support
Post by: Adenocard on September 24, 2010, 09:18:24 AM
I worked on a few versions of this script and had a hard time getting them to work, or recognize my beetle.  However I played with this one a lot and its working great.  Thanks for all the help in getting this to work for me, its doing a great job!!  Other then the beetle issue it really is a situation of following the directings to a t.  But thank you again for a great script its wonderful ;D
Title: Re: ScriptUO Heartwood Quester 1.28 with Advanced CLAw support
Post by: ZigZagZebra on October 16, 2010, 07:33:53 PM
So this one's broke as a joke?!

I guess I'll be having to do my favorite thing in the world. trying to toggle those teeeny tiny wittle bows.

Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on October 16, 2010, 07:36:29 PM
Should still work for the time being....

Beetle pack is still messed up, so you'll have to read below to see the fix past that problem.
Title: Re: ScriptUO Heartwood Quester 1.28 with Advanced CLAw support
Post by: ZigZagZebra on October 16, 2010, 08:32:30 PM
Should still work for the time being....

Beetle pack is still messed up, so you'll have to read below to see the fix past that problem.

Well I've tried to run it a few times, and it seems that the quest menu just keeps circling through and not accepting any and I'm not finding a way to choose which quests to accept and fill. I'll read through this thread and see if I see any similar symptoms. Don't mean to repeat any questions and drive ya nuts. even though there are nuts in trailmyx. lol
Title: Re: ScriptUO Heartwood Quester 1.28 with Advanced CLAw support
Post by: teruteru17 on October 20, 2010, 07:46:52 PM
broke since previous pub?
my char cant get quest..
Title: Re: ScriptUO Heartwood Quester 1.28 with Advanced CLAw support
Post by: TrailMyx on October 20, 2010, 08:25:42 PM
Yup, it's broken.  Can't say I'm going to fix it anytime soon.  With waning support for EUO, I can't really justify the time it'll take to fix it since this is a bigger fix than just a tweak.
Title: Re: ScriptUO Heartwood Quester 1.28 with Advanced CLAw support
Post by: teruteru17 on October 21, 2010, 02:39:26 AM
thx for replying.
Anyway a feeling of my gratitude and respect for you is not change.
Title: Re: ScriptUO Heartwood Quester 1.28 with Advanced CLAw support
Post by: d1v1n1ty on October 26, 2010, 07:22:17 AM
Nice script  :)
Title: Re: ScriptUO Heartwood Quester 1.28 with Advanced CLAw support
Post by: Cerveza on October 26, 2010, 07:23:47 AM
Please go read the rules. Your first post shouldn't be two words in a thread about a script you don't have access to.
Title: Re: ScriptUO Heartwood Quester 1.28 with Advanced CLAw support
Post by: Black Widow on November 04, 2010, 04:47:33 PM

Heyas,
excellent idea on the Heartwood Quester...Many Thanks
Title: Re: ScriptUO Heartwood Quester 1.28 with Advanced CLAw support
Post by: Khameleon on November 04, 2010, 04:55:54 PM
I wounder if you have the fully Supported version... you little sneaky restricted to download new guy........
Title: Re: ScriptUO Heartwood Quester 1.28 with Advanced CLAw support
Post by: hkuoshard on November 09, 2010, 08:58:06 PM
i love this script!!
but howto download it? help...
Title: Re: ScriptUO Heartwood Quester 1.28 with Advanced CLAw support
Post by: gimlet on November 09, 2010, 09:11:37 PM
i love this script!!
but howto download it? help...

Hmmm - I'd look at post 1 if i were you.
Title: Re: ScriptUO Heartwood Quester 1.28 with Advanced CLAw support
Post by: Cerveza on November 10, 2010, 04:34:47 AM
i love this script!!
but howto download it? help...

That's

STRIKE TWO

Your next post had better be correct, complete and in the right section or

YOU'RE OUTTA HERE
Title: Re: ScriptUO Heartwood Quester 1.28 with Advanced CLAw support
Post by: maties2009 on December 01, 2010, 10:48:38 AM
Gooood muchas gracias
Title: Re: ScriptUO Heartwood Quester 1.28 with Advanced CLAw support
Post by: Toptwo on December 01, 2010, 11:18:00 AM
Gooood muchas gracias

  Thanks for what? You can't even download it yet, and you never will until you read the SITE RULES and follow them!!!!
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on December 22, 2010, 08:36:06 PM
It's a Christmas miracle!  Updated for the latest version of UO and EUO!  
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: gimlet on December 22, 2010, 09:23:56 PM
WOW Great!!!!!
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on December 22, 2010, 09:25:58 PM
WOW Great!!!!!

Heh, well the Elite version has been updated forever.  ;)
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: teruteru17 on December 22, 2010, 10:11:41 PM
thx for updating.
i tried to test. 

when my char drag boards to my beetle from my secure, my char doesnt get boards.
and go to heartwoods, no boards, just return to my house...

(sorry my poor english)
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on December 22, 2010, 10:20:38 PM
You're going to have to look back into this thread and setup your beetle again.

Since exevent popup doesn't work on OSI anymore for the blue beetles - you'll have to do it by hand.  Once you save the new beetle pack, you shouldn't have to redo the guided setup until your beetle dies.

Here is the specific post:  HERE (http://www.scriptuo.com/index.php?topic=374.msg48553#msg48553)
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: teruteru17 on January 12, 2011, 01:44:16 AM
hmm
i saved my beetle by hand, but it doesnt get boards..
other guys really use this script now??
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on January 12, 2011, 05:20:09 AM
Yup, I ran it through several cycles the other night.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: teruteru17 on January 14, 2011, 03:55:19 PM
Good working now!
thx
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Hoby on January 27, 2011, 12:24:41 PM
Started using this baby the other day, just wanted to say again what a awesome script this is.  I got 5 heartwood runic saws the first day, then uo went and patched!! Bleh.  Waiting for euo to update to run this some more!!
BTW - version 2.0 is sweeet.  Was running it on two clients.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on January 27, 2011, 12:26:45 PM
Started using this baby the other day, just wanted to say again what a awesome script this is.  I got 5 heartwood runic saws the first day, then uo went and patched!! Bleh.  Waiting for euo to update to run this some more!!

Glad it's working again.  The questing/vender gump issue is pretty annoying, but my hack-fix seems to work OK.  Might be a bit slower than before, but there's really nothing that can be done.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: MeWonUo on January 27, 2011, 12:35:57 PM
I can't believe in all my time that I've never tried this.  I think I'll use it and burn through all of the normal boards I've got collecting dust.

I noticed in the checklist that is likes to ride the beetle?  Will it work without riding?  Fletching and carp are both on a gargoyle character, which I can stone around, just curious.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on January 27, 2011, 01:30:32 PM
Will it work without riding?  Fletching and carp are both on a gargoyle character, which I can stone around, just curious.

Nope, the rail in/out doesn't monitor the location of your wandering beetle.  The only way to ensure the beetle gets around is to ride'em.  Thankfully, the quester really isn't based on skill too much, so you can start a noob char.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Scrripty on January 27, 2011, 01:39:09 PM
MeWon if you've never used this you're missing out.  My CLAw crafter will use archer runics to craft bows with properties you want to keep using the claws rules soon.  That will make the heartwood quester pretty valuable for saving essence and crafting ingredients again.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: MeWonUo on January 27, 2011, 01:43:40 PM
Thanks for the info TM.  I don't mind moving fletching onto another toon to give it a go.  I'm off to mark some runes.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: MeWonUo on January 27, 2011, 01:46:34 PM
MeWon if you've never used this you're missing out.  My CLAw crafter will use archer runics to craft bows with properties you want to keep using the claws rules soon.  That will make the heartwood quester pretty valuable for saving essence and crafting ingredients again.

Very nice! I wasn't sure if you were going to add the other tools besides smithing hammers.  I'm guessing 3 million boards should give me a good stockpile of runics from the quests.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Sulter on January 28, 2011, 07:19:20 AM
this script was working great untile the day before the last download now it runs great untile you get into heartwood then it stops by the trashbarrel pauses for a while and then gets back on the bettle and goes back to the house it started from and then it will repeat this as long as you let the script run. Is there some thing I can change to make thie script work again.
Thank you
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on January 28, 2011, 08:03:38 AM
Someone will have to test that.  I don't do fletching anymorrr.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Sulter on January 29, 2011, 04:25:26 AM
Thank you for looking into my question
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: gruntman on February 18, 2011, 03:47:30 PM
I have an issue where when I run this with the claw it never loots the recipes...how do i make it so it always takes them?
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on February 18, 2011, 04:05:48 PM
Either fine the #FINDTYPE of the recipe, create a special search, or in the text section type "recipe".
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: gruntman on February 19, 2011, 05:47:48 AM
oh so if i type into the text box the script recognizes it without it being up in the active box?
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on February 19, 2011, 01:39:27 PM
Yes, for those specials, they are automatically applied; no rule needs to be placed in the active section.  You can create a rule for "recipe" if you are looking for one in particular, and that would need to be placed in the rules-->active section.  It's up to you really.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Talan Blackhart on February 25, 2011, 09:12:24 AM
Has anyone noted a problem with the rails script it keeps walking me into the teleporter but nothing seems to happen could be my pc tbh ill take a look at it and see if its something ive done wrong :D
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Kherkus on February 26, 2011, 09:11:10 AM
Just curious as to what is going on with my setup.  I've followed to on screen instructions to the letter, but when it asks me to select my "beetle" (is the beetle absolutely required or can a packy do the same thing?) and I do so, it then tries to find something in the upper left corner of my game window and will not go any further.  This is all during the setup.  I won;t be able to get this script to run until I do the setup as far as I know.

Thanks in advance.

PS.  If the answer is already up on the forum, I apologize for not finding it, but I'm somewhat busy with work and really can't spare the time to look through everything thoroughly.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Cerveza on February 26, 2011, 03:21:42 PM
If you read back you'll see where you should put a pause and open the beetle's pack by hand, then continue the script.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: The Ghost on March 01, 2011, 06:33:44 PM
The only problem I find with the script is that after ur finish the setup from ur house,  and hit start; if your mouse move the the top left of ur screen, pause the script  and open ur beetle pack and hit play again.   Enjoy.  I love it.   

Now for  my question,  what number to I required to save the talis that have slayer properties,  so far not are kept.    Thx
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: viniciusxis on March 10, 2011, 01:45:10 AM
hello there
well i tried using this script and a few bugs have come along:

first one is that when i get in, im a bit farm from the waypoint and it keeps saying "i can't get there", so i move it down and it goes. i believe this one has something to do with my rune (as it is marked one step from the gate) so i'll try to change it and see what happens

the second one is tougher though. when it gets to the fletching questers, it doesnt't get any questions. instead, he gets down from the beetle, gets about a hundred boards and start crafting bows and tries to craft quest items... he doesn't even try to get the quest
could you know what it is? im reading all the pages from both topics and haven't really found an answer.
im playing in windows 7, client 7,0,11, windowed mode on a freeshard OSI-Like (as i said, nothing else bugs and its all just like osi)
thx a lot in advance, this is a totally awesome script
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Cerveza on March 10, 2011, 03:26:31 AM
Bugs? No, what you have are issues.

1 - before "reporting" this as a bug, please try to fix it yourself. Mark your rune somewhere else and try it.

2 - "on a freeshard OSI-Like" - so it doesn't double click the quest giver to begin cycling through quests? Could have something to do with either what he's named or what TYPE he is. We can't help unless you provide more information, and even then - ; Shard OSI / FS: OSI / FS? the ? next to FS means it may not work.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: viniciusxis on March 10, 2011, 05:34:20 AM
sorry for saying 'bugs', my english in this area is not that great so i refer to all sorts of errors as bugs
yeah the first one was just to clear my mind  on it, i'll try to fix it myself. the real problem is the second one. The thing is exactly that, he doesn't double click the quester and so doesn't accept any quests, he just starts to try and craft quest item/bows.
It is a freeshard from my country (brazil), it is osi-like, it has until the SA expansion and almost 100% is exactly like OSI. The questers have the same name as i checked in uoguide (Jusae and Cillitha).
I also don't know what kind of information you may need for me to give so that you can help me, so if you could tell me i can provide it to you asap. I don't know how to check their types (i play runuo for about 3 weeks now, i played sphere before and used to check types/ids with Injection, but it doesn't work here)

sorry for any misunderstandings, i'll try to be more helpful so that you can help me from now on
edit: maybe i forgot to play something? i dont know what all those .txt that i downloaded are for. i just open the macro (SUOHWQuester) on euo and play.

Post Merge: March 11, 2011, 08:28:17 AM
so bumping here a lil bit, i tried using a script some guy made in euo to check their id/types and this is what i found out:

Jusae:
ID: FC
Type: XU

Cillitha:
Id: PC
Type: AV

is it any help?
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: kubism on March 24, 2011, 06:53:56 PM
Recently got back into UO.. This scrip has been of great assistance in catching up with all the new recipe and talismans ! Thank you for your hard work
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on March 24, 2011, 07:25:24 PM
@viniciusxis - Even though your freeshard is supposed to be "exactly" like OSI, chances are good they aren't.  Without actually logging into your shard and start debugging, we can't really help.  This is exactly why we DON'T support freeshards.  I'm afraid it's up to you to debug this and figure it out on your own.  Sorry.

@ghost - You can't use BM looter to grab talisman.  You should be using the CLAw for that.

@kubism - Thanks!
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: kubism on March 24, 2011, 09:14:46 PM
So I've been running the script for the past 2 hr or so, watching it as it goes. I've ran across a problem. Once out of a couple successful questing cycles, the script will stop after the reward loot bag is opened. It seems to be trying to target something, since I see the cursor hand with a target ring on it, but its not targeting anything. Sometimes I see message "target the item you wish to toggle" in the background.

I can hit esc key manually, and the script will continue as normal.

Not really sure what the problem is, as it seems to occure randomly, out of the 2 hr or so, the script has stopped with the same scenario 5 or 6 times.


*Update: it seems the issue was caused by lag, as I was testing on my Clear 4G. Switched to my DSL connection, and it's been working flawlessly with no hangups at all for the past hr or so.

Props for this awesome script !

Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Dimitri Kalashnikov on March 30, 2011, 12:51:18 AM
tanks for the  script! 8)
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Toptwo on March 30, 2011, 03:52:32 AM
tanks for the  script! 8)

  Your welcome...how is it working for you? Any problems?
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: teruteru17 on March 30, 2011, 04:36:41 AM
hello. GREAT script.
but cant use in yamato shard.
cuz there are some obstacles in front of gate of heartwoods.
so using passfinding, stop my char.
i think need to little change rail script.
help me plz plz.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: systempanic on April 09, 2011, 04:58:24 AM
Hello, I run this script today and get one Arch Support quest
for covetail saw runics, and after that, NO Arch Support
quests come up again.  :P
Is there a penalty been implemented for rejecting quests??   ::)
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on April 09, 2011, 08:51:09 AM
Works fine for me on Sonoma.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: systempanic on April 10, 2011, 07:34:12 PM
Works fine for me on Sonoma.

I got the answer. I was using a 14-day free trial account and thus cannot repeat quests  already completed.
 ???
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on April 10, 2011, 08:39:10 PM
That's good information; I didn't know that.  Thanks, we'll add that to the main post.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: gimlet on April 11, 2011, 06:59:35 AM
I didnt know that either
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Methyl on April 18, 2011, 03:52:32 PM
with the rail engine , it will not run. it says that 'tool_railengine30k.txt' cannot be found so i change the file name and it says "rail" not found

Post Merge: April 18, 2011, 03:54:08 PM
"rail file not found"
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on April 18, 2011, 03:54:21 PM
Works just fine for me.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Methyl on April 18, 2011, 03:59:07 PM
so why not me? theres nothing to loading a file, i have them all in a folder.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on April 18, 2011, 04:08:38 PM
Unsure.  You're going to have to do a bit of debugging.  Sometimes people have strange setup issues due to their operating system, home directory or some other strange things.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Methyl on April 19, 2011, 03:05:11 PM
ah well i figured it out, do you know any reason why the script would be not saving the "Setup" option or why it will not do the "open backpack" command on beetle? it freezes there and if i dont manually open the beetles backpack it just freezes
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on April 19, 2011, 03:11:21 PM
You probably need to run EUO in Admin mode since it sounds like it's not saving to your registry.

For the packy thing, you're going to have to surf this thread because EUO can no longer open the backpack of the beetle, so you need to help it.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Tnega on May 03, 2011, 02:04:26 PM
For the packy thing, you're going to have to surf this thread because EUO can no longer open the backpack of the beetle, so you need to help it.

Can you be just a tad more specific to where to surf? there is 42 pages in total at the moment :)

Post Merge: May 03, 2011, 06:10:09 PM
Nevermind (but I guess I should have started to read from the back instead of the start)!

Will try it out. (for thouse who are looking for this, page 37 middle)

Post Merge: May 03, 2011, 04:29:33 PM
Tried it out, and the info did NOT help unfortunately.

Post Merge: May 03, 2011, 03:19:22 PM
Nevermind ..
It works ...
Let me give you some useful into, when in pain about a script, dont smoke a huge joint and try to fix it!
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on May 03, 2011, 03:31:04 PM
Sorry, if I had to help people find things on the site, I'd be answering questions all day long (we have more than 2K users).  It's just easier to type in "beetle pack" in the search window and sift through the results.

If you do find a link, I will be sure to add it to post 1.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Tnega on May 03, 2011, 04:13:30 PM
Sorry, if I had to help people find things on the site, I'd be answering questions all day long (we have more than 2K users).  It's just easier to type in "beetle pack" in the search window and sift through the results.

Its Okay, I didnt expect to hear back so quickly.

If you do find a link, I will be sure to add it to post 1.

Dont know how to link it, but its in the middle of page 37 :)
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Cerveza on May 12, 2011, 04:41:32 AM
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: asphixated on May 23, 2011, 05:57:35 AM
how do i get this to work on a free shard?
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Cerveza on May 23, 2011, 06:19:21 AM
how do i get this to work on a free shard?

#1 - Please read the Site Rules to become familiar with the download requirements of this script

#2 - ; Shard OSI / FS: OSI / FS?

#3 - [  ] - You are running on OSI This script most likely will not work on your Freeshard

Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Sioned on May 27, 2011, 02:12:25 AM
Hello all...fantastic script Trailmix I want to thank you for all your hard work, I don't know where you get the time. I did have a minor problem just like some others had where it would run while i was on heavy beetle and cause trouble getting to Heartwood...I tried to move mouse on top of my character but the script would make the curser shoot of over to one side all the time...So to fix this i put my finger on the screen where the script was moving the cursor then i moved the whole play screen so my character was under my finger and voila from then on the script has worked perfectly for me...All i did was follow the instructions...I'm running on an 21.5 inch Imac running Windows 7 with a screen resolution of 1600*900 in 32bit of course...I play on the Oceania shard...Anyway just wanted to say thankyou for all your excellent scripts and mention how to solve my minor problem...Have fun all.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on May 27, 2011, 07:08:16 AM
Sounds like your iMac(burp) interpretation of Win7 is messing up the clicking.  On normal windows computers, the rail engine already does the cursor move to your character.  So locate the click location in the rail engine and adjust the values to be more compatible with your physical setup.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: josepirueta on July 02, 2011, 09:19:33 PM
Thank i will give it a try
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Toptwo on July 03, 2011, 04:18:09 AM
Thank i will give it a try

  Oh...I kinda doubt it..that is unless you try following the site rules.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: josepirueta on July 08, 2011, 02:18:42 PM
Thank i will give it a try

  Oh...I kinda doubt it..that is unless you try following the site rules.

A friend/clanmate emailed it to me and told me about the forum, i wanted to say thx anyway :)
since i script or fix some scripts to our shard i thinks the less you can do is at least to say thxs, isnt it?
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Evil Demon on July 20, 2011, 01:23:27 PM
nice script dude
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Toptwo on July 20, 2011, 03:32:45 PM
nice script dude

  You like?  Now try following the site rules and posting up an intro.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: luv2luvlong on July 22, 2011, 08:06:20 AM
Just wanted to say thanks again for this script TM. I hadn't used it in over a year or more just loaded yours w/bank support (nice addition). In one 3 hr run 2heartwood, 1yew, 1 oak. LOL

gotta love the rng.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Evil Demon on August 19, 2011, 11:55:59 PM
Havent used it was more or less just looking at it and thought it was a nice contribution to your website  :-\
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: NObama on August 20, 2011, 12:39:29 AM
Havent used it was more or less just looking at it and thought it was a nice contribution to your website  :-\

Haven't used it?  Why not?

*pokes the moderators*
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Evil Demon on August 20, 2011, 01:54:43 AM
I'm more interested in trying to make my own.... i like the idea of helping others plus i don't really play UO all that often anymore, i would like to see me being able to make scripts for others to injoy :D
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Crome969 on August 20, 2011, 08:37:25 AM
I'm more interested in trying to make my own.... i like the idea of helping others plus i don't really play UO all that often anymore, i would like to see me being able to make scripts for others to injoy :D
Give you a hint. Learn lua\Openuo then u can make decent speedimprovements.
Iam currently testing a lot with Openuo on HW Quests tryting to make a stable library for base and when i getting better in Menus will rewrite in Openuo for all Quests.
Right now in my tests i need about 8 seconds maximum for fullfill a Quest with Itemevaluation\Sorting\Trashing so i think easyuo never will beat that:$

Crome
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: defcomdos on September 21, 2011, 11:39:13 AM
hola, me gustaria poder probar este script, porfavor que tengo que hacer.
Hi, I'd like to try this script, please I have to do
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Cerveza on September 21, 2011, 11:41:50 AM
But... but...

:(
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: tuxon on September 29, 2011, 06:30:40 AM
Great script.

I play on a Client version 7.0.11.2 (patch 80).
I was able to run the old version 1.16.

Now i was looking to make also this working by some modify.
1.29 version for me seems to loop down in Heartwood, when the script has to start making the 10 Foot stool (i' m trying to do the carpenter quest); it opens the craft gump and stops.
Precisely it loops here:
Code: [Select]
sub GumpAndSizeWait
  set %timedelay #SCNT
  wait 5
GumpWait_loop1:
  if #CONTNAME = %2 && #CONTSIZE = %3
    return #FALSE ; no error
  if #SCNT > %timedelay + 7
    return #TRUE ; error, timeout
  goto GumpWait_loop1          <------ here is where it stops, line 2357
return #TRUE ; should never get here.

I think the problem is with the x-y position of the click that has to make the items, so i tryed some solutions:

Code: [Select]
;===== Carpentry setup =====
......
......
    set %craftitemchain_tool cat_2-sel_1  ;was cat_3-sel_2 <----------
......
......

I also tryed to copy the "sub craftItem" from the version 1.16 and paste in 1.29, but i' m not able to make it work, it still opens the craft menu and stops.
Are there other values to modify with older clients?

Thanks in anvance for any suggestions  :P

Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on September 29, 2011, 07:47:43 AM
Must be a freeshard.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: tuxon on September 29, 2011, 11:36:34 AM
Yes is a freeshard, but i asked this because version 1.16 works and i thought version 1.29 maybe can works too by modifying only the position of the menu.
The problem is that i' m not so skilled in scripting. Btw i' ll go to re-analize the script to see if i have missed some positioning variables :)
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on September 29, 2011, 11:39:32 AM
There were 2 different changed when OSI revised.  One was the gump size, and the other was the position of the quest text within the gump.  I'll go back into the history of the releases and see if I have the equivalent version  of the CLAw enabled one for 1.16.  If I can find it, i'll post it for you.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on September 29, 2011, 11:56:25 AM
Ok, here's the older version that should support the older clients.  No guarantees, though...

Remember this script is really only supported for OSI.  You're pretty much on your own if you are running on a freeshard.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: tuxon on September 29, 2011, 12:29:26 PM
Thank you very much , i' ll go to try this  :-*

For now, the only changes i had to do in version 1.16 were:
- the object type of the tool
- the gump of the beetle (in my shard is 11 instead 10, think the extra-gump is an "add friend" when i initialize the script in the house)
- a spot in the rail file (heartwood entrance is 2 tile north of the OSI-rail)
- the %craftitemchain_tool variable

I go to test the 1.23 , thanks for this version :)


EDIT:
Works perfectly!!!!!! many many thanks!!
I added 2 lines in your script after line 1968, i see it works with a container near the recall home position, but my house is on felucca and set private , so i have to go inside home.

Code: [Select]
if not #CHARPOSX = %spot_x_in_home && #CHARPOSY = %spot_y_in_home
event PathFind %spot_x_in_home %spot_y_in_home %spot_z_in_home

On a stand-alone tab seems to work
Edit: find, my type for the saw was different
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: SolidSnake on November 02, 2011, 05:19:30 PM
TM..giving this a shot for some talisman loot.

In the setup, using non uoa or razor client and with the shift-click for gump turned off..it would not find or open the beetles backpack.

With JAF's help, we turned off line 1740 and simply input the beetles backpack ID in 1742.

The script worked from that point on.

Just a heads up.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on November 02, 2011, 06:05:47 PM
You'll have to read through the latest history of this thread.  There is a method to fix this, and once you save the setup, you'll be OK until your beetle dies.

But you can blame EUO for this bug.  Cheffe won't fix this.  Not sure why

BTW, here's the link to the post that helps you get past this beetle pack setup:

http://www.scriptuo.com/index.php?topic=374.msg48553#msg48553

(I added this to post 1)
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: SolidSnake on November 03, 2011, 10:27:02 AM
Thanx brother..appreciate the help and feedback.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Sardorn on November 05, 2011, 08:42:00 PM
Good afternoon/morning/evening/day

Took a couple month break from UO to play WoW and EQ2 but decided tonight I wanted to veg out in UO again. So I hopped on my crafter, fired up this awesome script which had worked flawlessly last time I played and suddenly it's not. I read back a few pages and didnt see anything on this so I apologize in advance if this has been addressed.

Starts up fine, I ran it through the setup just because there have been a few patches and I never know if ID's change. I hit start, it opens my drop box in my backpack, opens my secure, grabs a stack of wood and tries to drop it in my backpack bag instead of the beetle I'm using. Wont drop because it puts me way over weight, hops on the bug and rides off into the heartwood sunset, only to get there and realize I am without wood, runs back home and repeats.
I've let it run a few times to see if it would somehow auto correct itself but it just keeps doing the same thing. It's not opening the bugs pack at anytime throughout this either. I know about having to open it on setup but in the past it would work fine after that.
And, since it kept opening my drop bag in my backpack, I tried targeting the beetle for that but no go. Best as I can figure, it's not grabbing the beetle as the last target and instead going back to the loot bag.
Any idea how I should fix this?

Thanks
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on November 05, 2011, 09:23:32 PM
Keep reading....  EUO is officially broken with opening the bugs pack, and it just won't be fixed.  You'll have to PM Cheffe and give him crap for that.  Otherwise, be sure you have ingots/tinker's tools on your character.

Look down the thread to see how to "fix" the beetlepack thing.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: SolidSnake on November 06, 2011, 05:12:20 AM
Good afternoon/morning/evening/day

Took a couple month break from UO to play WoW and EQ2 but decided tonight I wanted to veg out in UO again. So I hopped on my crafter, fired up this awesome script which had worked flawlessly last time I played and suddenly it's not. I read back a few pages and didnt see anything on this so I apologize in advance if this has been addressed.

Starts up fine, I ran it through the setup just because there have been a few patches and I never know if ID's change. I hit start, it opens my drop box in my backpack, opens my secure, grabs a stack of wood and tries to drop it in my backpack bag instead of the beetle I'm using. Wont drop because it puts me way over weight, hops on the bug and rides off into the heartwood sunset, only to get there and realize I am without wood, runs back home and repeats.
I've let it run a few times to see if it would somehow auto correct itself but it just keeps doing the same thing. It's not opening the bugs pack at anytime throughout this either. I know about having to open it on setup but in the past it would work fine after that.
And, since it kept opening my drop bag in my backpack, I tried targeting the beetle for that but no go. Best as I can figure, it's not grabbing the beetle as the last target and instead going back to the loot bag.
Any idea how I should fix this?

Thanks

we turned off line 1740 and simply input the beetles backpack ID in 1742.

The script worked from that point on.

Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Sardorn on November 06, 2011, 08:39:47 PM
This may sound kinda dumb, but how do you get the beetles backpack id? all I can find is the beetle ID?
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: SolidSnake on November 07, 2011, 06:12:11 AM
open the beetle's backpack and then look under the container ID over on the right hand side of EUO
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Sardorn on November 07, 2011, 06:56:51 AM
Wonderful, for the most part that seemed to do the trick, thank you very much all of you!
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: fluxcapacitr on December 31, 2011, 10:24:57 AM
Anyone finding that the script sometimes doesn't highlight ALL quest items and hangs?  Wondering if it's just me with this problem..
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Joshua1601 on December 31, 2011, 09:17:36 PM
I have a question. I am probaly doing something wrong but I followed all directions and after I do intial setup it will not do anything. It just sits there. Any ideas on what I am doing wrong ? any help would be welcome.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: The Ghost on January 01, 2012, 09:50:34 AM
Are you using a beetle, if yes, you need to pause the script, open the beetle pack and hit play again,  save the setting and you should be find after.  EUOX have a problem with opening beetle pack.  hope that help. 
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on January 04, 2012, 10:40:17 AM
Are you using a beetle, if yes, you need to pause the script, open the beetle pack and hit play again,  save the setting and you should be find after.  EUOX have a problem with opening beetle pack.  hope that help. 

Ghost is definitely correct with the beetle setup issue.  You can find the remedy here in this thread somewhere.  Once you get the beetlepack identified and save your setup, you should be good to go until the beetle dies for some reason.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: warthance on January 14, 2012, 03:15:18 PM
i have been looking everywhere online for a heartwood quest and this seems to be the only one i can find, problem is im on a free server and it requires razor to log in...2 strikes against me there. lol there are lots of replies from ppl all over the internet bragging that they have one but nobody will give it out anymore. thanks for the work u have put into this
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Nellie on January 14, 2012, 03:27:20 PM
I still have a copy of the original script posted on the other site, i just cant get it to work properly any more. I doubt if i would be able to post it as its not my own work.

Nel
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: anakin on January 15, 2012, 02:27:51 PM
I read aloot , but i still cant understand how to  see codes example for arch suport XXXXXX ,  :'(
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on January 15, 2012, 02:31:19 PM
I read aloot , but i still cant understand how to  see codes example for arch suport XXXXXX ,  :'(

Use the Force, young Jedi.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Darknite on February 14, 2012, 03:00:35 PM
Ok ive run into a little problem running the script its been a while since ive used it.
it keeps on telling me that it cant find the rail, even thought i have the tw_bow rail up and the rail engine up too.
I know its something real simple im missing too.

Thanks for any help
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on February 14, 2012, 07:30:50 PM
You don't have to run the rail engine for the HW quester.  Just be sure to have the rails in the same directory as EUO and the quester script itself.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Darknite on February 16, 2012, 10:58:14 AM
Thks Trail i knew it was something real simple...

Now comes the next issue
I load up everything up just fine, but since its the first time i run threw setup.
After it asks you the last question to target the beetle and you do i hit the save nothing happens except the mouse cursor goes to upper left hand corner of uo window. It does this on two different PCs. One on xp other on win 8. The its saved message never comes up.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on February 16, 2012, 01:20:44 PM
You'll have to read down the thread a ways to help EUO deal with a bug in EUO itself.  If you follow the directions exactly you'll be able to get past and continue.

Here's a link to the post:
http://www.scriptuo.com/index.php?topic=374.msg48553#msg48553
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Darknite on February 16, 2012, 03:09:24 PM
thks trail it works like a charm now.

you the best
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: lordraith on March 05, 2012, 03:22:28 PM
wow, just....wow :) what a sweet piece of work this script is. ive been a member here for a few weeks and wanted to see what the hype was about, so i tried it. As ive said in the past, i have less than 0 scripting skills, and my experience with scripts is mostly limited to mineing, but i did run and like craftmatic...an old but great heartwood script, that no longer works due to menue changes.
To be honest, i had also never used TM claw either, and was a lil overwhelmed by all the options there, but made it thru...a credit to its simplicity, not my skill.
I did fail as a scripter my 1st few tries... but eventually re-read your instructions, and the Q and A...it was all my bad, and im glad i didnt post for help, hehe
Once i finally got it right on my end, as per your instructions, everything runs great, infact its running now, im still on my first 10k wood. but ive made a few runs flawlessly already.
I have a few suggestions for improvement, but they are in no way criticisms, just my way of tying to add something. Firstly, i would have it take the quest before it makes the stools, and have the toll mark as quest item for you, to save that step completely. Also, a pause button might be nice. And lastly, i wonder if multi-packie support might be possible, although i wouldnt use it myself.
Agian, this is an awesome script, thx so much for shareing it  8)
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on March 05, 2012, 04:39:32 PM
Glad it worked for you.  The public quester is considered WYSIWYG.  Probably won't be adding any features to it.  But it's stable and will crank through the wood.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: The Ghost on March 13, 2012, 10:23:26 PM
To  Author: Cerveza / TrailMyx

I have try to change the set %QUEST_A_Simple_Bow 6415424  to make X-Bow quest.    My problem is I can find the right  OCR # I have try many number but is just roll over the quest.   I was raise my Fletcher so I was trying to change the quest.   Was wondering if you can help me or point me into the right direction of how to find OCR #.   6415424 is form the Result variable as far as I can see.  even if I 10013928  that suppose to be for the Archery, part I.   

Hope I didn't step on any toes by asking those question.  thx
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on March 14, 2012, 08:18:24 AM
Try putting a "pause" in the script right when the script computes the quests numbers as the quests are selected.  When you reach the right quest, make a note of the computed number and use that one for the quest you desire.  you'll also have to adjust the items you are crafting, but with Machine's craftitem, it's pretty easy.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: The Ghost on March 14, 2012, 06:08:42 PM
Thx for the tip, didn't work.  I can made new item but the quest part doesn't work.  So I much forget to change some stuff.   Look like I will have to do it by hand. :(
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on March 14, 2012, 06:19:04 PM
Well that's how all the selections were created for the 2.0 quester.  What value pops up when Ingenious archery I comes up?
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: The Ghost on March 14, 2012, 06:44:31 PM
this is the last # 10013928 before the quest change.    I can see the simple bow quest number.  Like any other problem it an operator problem, :)) I'm sure I did get all the right value. 
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on March 14, 2012, 06:46:08 PM
Yes, that is the right value.  It matches the one I found for the 2.0 quester.  So something else is amiss.  Although I haven't tried the 2.0 quester in a long time though.  Who knows if it even works.  lol
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: kib64844 on March 14, 2012, 08:19:24 PM
Hello ~ I just joined the forum I ask why do I not see the entire script code?
Do not have permission? The how to download it?
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: The Ghost on March 14, 2012, 08:48:36 PM
I have the 1.29 version and it work like a charge.   I add a pause at line 2227 and now it stop and read the quest, but in other hand and select ever quest :(  Not sure what happening, thx for the help.   Going to read the code again see what I forget to change.  I was happy for a sec :))


@kib64844
You need to get ur restriction lifted,  this will happen when u introduce yourself.  Just go
http://www.scriptuo.com/index.php?board=20.0 , New member introductions and if the staff like what the read, you will get access.   Good lluck
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Xanderyum on April 05, 2012, 01:09:57 AM
Not Sure if this has been covered.  Don't use hiding if you are using the CLAW, Seems to pause waits until you reveal yourself.  and If you set to mark as quest item in the craft menu couldnt the steps to find and mark the items be taken out?  so accept the quest and then make the items. the game will mark them auto.

Cheers
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on April 05, 2012, 09:08:14 AM
There should actually be a work-around for this.  I thought we fixed this issue a LONG time ago..  I'll check on it.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: warthance on April 05, 2012, 09:14:39 AM
hi there Trail...i actually still have a copy of your original of this absolutely wonderful script. lol i bugged you years ago when i had trouble getting it going, but once it ran...it did just that...ran. it ran so well that i would set it and leave for work and play...id check it in the evening until i figured out away to incorporate another sub or 2 to make it chop wood when my secure was empty and it would also do the same if i was out of ingots for tools. well that took all the fun out if so i removed those subs. a few days after i remeved them i was laid off at work so i just sat and watched it work its magic...lmao them i stepped out to smoke a cig, came back and was in a room full of moongates. serves me right tho. i did learn that while running a script it is best to hit pause if i have to step away even for a moment lol. well anyways, i figured i would say hi, long time no speak lol. is this new one as good as the old one was? i havent read on the claw thing so im headed there now to find out what its all about. well, thank you for keeping this going for sooooo many years. your hard word was appreciated back then and will always be.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on April 05, 2012, 09:18:50 AM
At least you were in the macro-ers den in at Buccs instead of jail.  heh.  Did you get suspended at all?

Anyhow, the heartwood script here was a collaborative effort really started by Cerveza.  I just gave it a bulletproofed outer coating.  ;)
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: warthance on April 05, 2012, 09:39:08 AM
lol yeah i had to sit in that room for 72 hours....luckily it wasnt like murder counts where u have to spend the hours logged in. how is Cerveza? havent been around for a bit so im kinda out of the loop lol...i hear j4bber quit uo and everything all together. is that right?
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on April 05, 2012, 09:53:02 AM
j4bber pretty much screwed the whole community when he left.  Basically deleted uocoders and its content.  So a couple years of accumulated information and hundreds and hundreds of hours wasted volunteering.  So he's also on the "he who shall not be named" list.  ;)

Cerveza is still here though.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: warthance on April 05, 2012, 09:55:01 AM
ahh yeah i know when uocoders went down several of my scripts where posted there and since i lost my back ups of them...gone forever. oh well...what doesnt kill us makes us stronger, and since only the strong survive...here we are lol
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Khameleon on April 05, 2012, 04:31:59 PM
TM.. there was no official update for this, because it part of the claw that has to be changed..
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: formerlyrara on April 05, 2012, 05:09:01 PM
I honestly used this script about a week ago and had no issues with it. I didnt really use the claw to much cause i was gathering all items to keep and go through.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Xanderyum on April 05, 2012, 08:43:31 PM
I took out the mark sub and moved the order of one sub the get quest sub. I put it before the craft spot and turned on the mark as quest item in the tool hump. Turned off hiding and works great!
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Soular on April 25, 2012, 02:22:31 AM
Hi,

script works actually?
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: formerlyrara on April 25, 2012, 02:37:11 AM
If you follow the instructions to the letter you will have no problems with this script. I run this once a week to gather some saws and talismans for players and have no issues with it.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Ultima on May 08, 2012, 08:24:13 PM
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: waggler on May 16, 2012, 09:30:32 AM
does  suo quester 1.29 still work?  i keep gettign a message syaing. cant not find rail.. i do have the  tool_rail30k.txt file  in the same folder as easyuo and suo quester. any suggestions?
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: blazehammer on May 22, 2012, 02:22:00 AM
You need to save the rails in the same folder as the quester i have beeen using it 24/7 last few weeks so i do know it will work
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on May 22, 2012, 07:21:43 AM
Yep, blazehammer is right.  I fired this up just a little while ago.  OCR hasn't changed recently (only once in the history actually) so it still cruises along.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: blazehammer on May 22, 2012, 08:15:42 AM
hey TM is there a button that can be used to pause the script when the rails go crazy and you cant get the mouse to the easy uo to stop or pause it
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on May 22, 2012, 09:10:44 AM
Not really.  I normally use "Alt-Tab" to bring the EasyUO window program to the forefront, then I pause the script with the keyboard.  Takes a bit of practice, but it works.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: onlyindreams on May 25, 2012, 01:02:12 AM
Not really.  I normally use "Alt-Tab" to bring the EasyUO window program to the forefront, then I pause the script with the keyboard.  Takes a bit of practice, but it works.

Learn something new every day! Never knew about alt+tab until now.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on May 25, 2012, 07:47:15 AM
Always happy to help!  :)
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Mythix on May 31, 2012, 04:33:29 PM
Got this working on my freeshard, and I must say, THIS SCRIPT ROCKS!

I even added in a little "feed beetle" sub everytime my char goes home to drop off stuff and get more resources.  It's really not that hard to make it adaptable to your freeshard if you can find the tool ids and enter them into the correct place and also entering in the category/selection for making the tools and quest items.  That's the biggest difference.  Also, one other place to change would be the pixelsampling sub.  I just grabbed the pixelsampling from 1.16 and inserted it into 1.29 and it came out right.  (At least for the Arch Support Quest that I have been using.  Haven't tested it yet for A Simple Bow).
Change this code on or around line 2221:
Code: [Select]
    set !sampled_CONTPOSX #CONTPOSX
    set !sampled_CONTPOSY #CONTPOSY
    set !x 197
    set !y 71
    set !clickxposition1 !sampled_CONTPOSX + !x
    set !clickyposition1 !sampled_CONTPOSY + !y
    set !clickxposition2 !sampled_CONTPOSX + !x + 175
    set !clickyposition2 !sampled_CONTPOSY + !y + 10

to this:
Code: [Select]
    set !sampled_CONTPOSX #CONTPOSX
    set !sampled_CONTPOSY #CONTPOSY
    ;added sampling area from 1.16
    set !clickxposition1 !sampled_CONTPOSX + 157
    set !clickyposition1 !sampled_CONTPOSY + 111
    set !clickxposition2 !sampled_CONTPOSX + 332
    set !clickyposition2 !sampled_CONTPOSY + 121

I also commented out these lines on or around line 2209:
Code: [Select]
    gosub Gumpwait NULL paperdoll_gump paperdoll_gump
    set !clickx #CONTPOSX + 80
    set !clicky #CONTPOSY + 80
    click !clickx !clicky dmc r

For some reason it seems to be looking for the vendor's paperdoll gump, which never appears, which causes a long time-out delay.  Commenting this out makes it fly through quest selection! 

Also around line 2233 a y-selection needs to be changed from 464 to 400 and again in the finishquest sub change 464 to 400 around line 1018.
Code: [Select]
    if #RESULT = !questval
    {
      set !clickxposition1 !sampled_CONTPOSX + 131
      set !clickyposition1 !sampled_CONTPOSY + 400 ;changed from 464 <-------------------
      click !clickxposition1 !clickyposition1 f

I also commented out the rail because I can recall right next to the vendor :)

I just have one question for you.  Sometimes in the sub TM_Travelfromrunebook, it leaves the runebook open after reaching the destination.  I noticed the code here:
Code: [Select]
if #CONTNAME = generic_gump && #CONTSIZE = 452_236 ; RunUO close runebook
  {
    set !clickx #CONTPOSX + 120
    set !clicky #CONTPOSY + 60
    click !clickx !clicky mc r
    wait 5
  }
  namespace pop
is trying to close the runebook.  I've fiddled with the numbers, and changed it to dmc, but still not having any luck with it being able to close the runebook.  Any ideas?  The runebook does have the #contname generic_gump and the #contsize is indeed 452_236, so it's passing those parameters fine. 

I want to also get it working for the blacksmith quest so I can get a butcher's war cleaver recipe, since no one seems to have on my shard.  I'm gonna fiddle with it some more after I get some more runic saws to make my woodland armor.  I've gotten 3 heartwoods and 3 ash saws thus far with only about 100k wood.  Love love love this script!!!
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Mad Tamer on July 08, 2012, 05:36:29 PM
Thank you for your amazing script... I have been watching it run perfectly for a few hours. I am gonna start using the CLAw looting script alot now it seems better than the old one I was using. Soo thanks 2x times :)
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: milkmandan on July 26, 2012, 06:49:57 AM
ok guys having a hard time editing this script to do what i need it to do.
 SO I AM OFFERING TO {BREAK THE RULES OF SUO}* to make a simple mod to this script.

all i need it to do is cycle the quests until it gets the lethal darts quest. on the freeshard i play its 10crossbow bolts. all i need it to do is accept the quest , toggle quest item the stack of bolts in my bag, and turn in quest. thats it. dont need it to craft anything or loot anything just take quest toggle item, turn in quest. any takers?

*Cerveza
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Cerveza on July 26, 2012, 08:19:13 AM
Yeah... about that...

Quote from: RULES
No public solicitation to buy/sell scripts for RL cash or virtual loot

Please read the rest of our rules. RULES (http://www.scriptuo.com/index.php?topic=447.0)

Leaving this up so others won't make the same mistake.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: milkmandan on July 26, 2012, 09:35:40 AM
sorry bout earlier post.

k can anyone tell me how to change the quest from a simple bow, to lethal darts? and if they know the number?

tryin to make it just grab the lethal darts quest, toggle the crossbow bolt stack in bag, and turn it in... here is what i have, but it says cant find vendor, and i dont have the right quest number cause it keeps passing it by.

Code: [Select]
gosub cyclequests
  gosub mark
  gosub finishquest
  wait 10
  goto loop

set %QUEST_Lethal_Darts 6415424


;===== Fletching setup =====
  menu get EUOComboBoxQuest
  if #MENURES = 1 && ( %quest_type <> FLETCHING || %mintinkertools = N/A )
  {
    set %quest_type FLETCHING
    ;set %tool UFG
    ;set %toolresource KTL
    ;set %toolresourceamt 3
    ;set %mintinkertools 2
    ;set %maxtinkertools 2
   ; set %mincraftingtools 2
    ;set %maxcraftingtools 4
    ;set %craftitemchain_tool cat_4-nextpage-nextpage-sel_1
    ;set %craftitemchain cat_4-sel_1
    ;set %ressource TLK
    ;set %reshue 1 ; 1-wood, 2-oak, 3-ash, 4-yew, 5-hearwood, 6-bloodwood, 7-frostwood
    set %item LNK
    set %string %QUEST_Lethal_Darts
    set %itemamount 1
    ;set %itemresourcecnt 7
    ;set %resamount 1   ; was 70
    ;set %cat 3
    ;set %page 1
    ;set %itemnum 3
    ;set %vendortype bowcrafter$
    ;set %rail1 tobowcrafter
    ;set %rail2 frombowcrafter
    ;set %pakboards 1540
  }
  sub mark
  {
    gosub HandleContextMenu NULL #CHARID %CONTEXT_Toggle_Quest_Item
    finditem %item C_ , #backpackid
    while #findkind <> -1
    {
      if #findcol <> 1258
      {
        set #ltargetid #findid
        set #ltargetkind 1
        wait 0
        target 3s
        event macro 22
      }
      ignoreitem #findid mark
      finditem %item C_ , #backpackid
    }
    repeat
      {
        wait 5
        key ESC
        wait 5
      }
    until #TARGCURS = 0
  return
}
;----------------------------------------------------------------
sub cyclequests
  {
    NAMESPACE PUSH
    NAMESPACE LOCAL cyclequests
    gosub findvendor %vendortype
    if #RESULT = #FALSE
    {
      display ok Cannot locate a vendor for this quest.
      stop
    }
    gosub SelectQuest NULL %vendor %string -1 ; loop until found, no count
    NAMESPACE POP
  return
}
;----------------------------------------------------------------
sub finishquest
  {
    gosub findvendor %vendortype
    set #lobjectid %vendor
finishquest_loop2:
    event macro 17
    gosub Gumpwait NULL paperdoll_gump paperdoll_gump
    set !clickx #CONTPOSX + 80
    set !clicky #CONTPOSY + 80
    click !clickx !clicky dmc r
    gosub GumpAndSizeWait NULL generic_gump %quest_gump_size
    if #RESULT = #TRUE
      goto finishquest_loop2
    set %tempx #CONTPOSX
    set %tempy #CONTPOSY
    gosub OffsetClick 131 464 dmc
    gosub GumpAndSizeWait NULL generic_gump %quest_gump_size
    gosub OffsetClick 131 464 dmc
    wait 5
    set %temp_scnttimeout #SCNT + 5
    set %temp_rval #FALSE
finishquest_loop1:
    if #CONTNAME <> generic_gump && #contsize <> %quest_gump_size
      return %temp_rval
    if #SCNT > %temp_scnttimeout
    {
      set %clickx %tempx + 350
      set %clicky %tempy + 400
      click %clickx %clicky f
      set %temp_rval #TRUE
      set %temp_scnttimeout #SCNT + 5
      wait 5
    }
    goto finishquest_loop1

  return #FALSE ; never gets here.
}
;----------------------------------------------------------------
sub findvendor
  {
    namespace push
    namespace local FV
    set !temp_lpc #LPC
    set #LPC 1000
find_vendor:
    set !temp_vendortype %1
    finditem IS_HS_XU_AV_WYTIB G_20
    if #findkind <> -1
    {
findvendor_loop1:
      str pos !temp_vendortype $
      if #STRRES <> 0
      {
        set !str_len #STRRES
        set #STRRES !str_len - 1
        str left !temp_vendortype #STRRES
        set !present_property #STRRES
        str del !temp_vendortype 1 !str_len
        set !temp_vendortype #STRRES
        event property #findid
        set !quest_giver quest , #spc , giver
        if !present_property in #property && !Cillitha in #property
        {
          set %vendor #findid
          ignoreitem reset vendors
          set #LPC !temp_lpc
          namespace pop
          return #true
        }
        else
        {
          goto findvendor_loop1
        }
      }
      ignoreitem #findid vendors
      goto find_vendor
    }
    ignoreitem reset vendors
    set #LPC !temp_lpc
    namespace pop
  return #false
}
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Cerveza on July 26, 2012, 11:31:02 AM
Your shard may not use the same ID's or titles, or even have the correct event macros or popups.

I suggest reading this thread in it's entirety. I know it's a lot, but there IS information regarding how to use it on freeshards posted.

Do the ground work first, hopefully you'll find the information you are looking for.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: waggler on July 26, 2012, 02:31:07 PM
has anyone found a cause or fix for the pathfinding bug in HG 1.29?  it happens to me alot. but i know  other peopel using the script have no issues like this at all.  basically, i will come back to my computer and see my character locked in pathfinding. either at house or in heartwood.  there is no way to get out of the  pathfinding without a hard shutdown of easyuo.  i use my gm detector now to close it out. by sepaking "gm"  but, its pretty annoying.  i've tried to speed up and slow down my mouse clicks.  tried resizing screen resolution.  now my latest try is to turn off my run mouse in a seperate thread option in uo.  can anyone make suggestions that might help fix this problem.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on July 26, 2012, 04:04:04 PM
I don't have a problem with it, but then I use a different rail.  Probably need to think about adjusting your rail a bit.  Sounds like you have a laggy connection also.  Sometimes if you lag out too much after the recall, the rail may start before it's ready.  You may need to add a bit of delay after the recall to heartwood so you're actually there and not in lagspace.

Looking back quite a ways in this thread, I don't really see a common issues about this. 
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Mad Tamer on July 26, 2012, 07:46:18 PM
has anyone found a cause or fix for the pathfinding bug in HG 1.29?  it happens to me alot. but i know  other peopel using the script have no issues like this at all.  basically, i will come back to my computer and see my character locked in pathfinding. either at house or in heartwood.  there is no way to get out of the  pathfinding without a hard shutdown of easyuo.  i use my gm detector now to close it out. by sepaking "gm"  but, its pretty annoying.  i've tried to speed up and slow down my mouse clicks.  tried resizing screen resolution.  now my latest try is to turn off my run mouse in a seperate thread option in uo.  can anyone make suggestions that might help fix this problem.

It has happened to me a few times.  I have really really bad lag tho. I am on WIFI on a server with high ping. I watch this script run so I just hit CTRL ALT DELETE n close EasyUO its not that big of a deal. Was very annoying the first time when I was trying to close EasyUO and the mouse kept popping back lol.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on July 26, 2012, 07:54:43 PM
It's actually pretty easy to stop it.  

1) Alt-Tab until you highlight the running instance of EUOX.exe.
2) Press Alt C, Alt A to stop all running scripts. (don't release the Alt)
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Xanderyum on July 27, 2012, 06:36:26 AM
This is very nice, I like it.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Xanderyum on August 03, 2012, 10:00:42 PM
I have a problem......I havent done the heartwood quests for a month, so I figured it was time to load up and head out to Heartwood.  Everything was running smoothly, I was crafting bows looting the good stuff, heading to my bank and putting the good stuff away.  rinse and repeat. Well I walked away for awhile, played some xbox cruised the web on my tablet PC.  Came back and I was in a loop after grabbing the wrong quest.  Simple fix. I cancelled that quest started the correct one and off and running again.  well came back later, and I was having the same problem.  So what ev. I fixed it again.  That's when things got odd.  I started just going from the bank to Heartwood over and over, yeah I'd open the bank get off my beetle and then get back on my beetle and head back to heartwood.  "Strange!", I said to myself, but I new I could just restart and the problem would go away.  Well, now when i start the script, It goes through the first steps, until it gets to looking in my bank for boards. I checked and they are still  TLK in the game (OSI) and i the script. I looked at what Easy thinks there color is, and it's still 0.  I didn't adjust anything on my TV or computer resolution wise. Nothing! I only changed the input channel between Xbox and Computer to check on my toon between rounds of Battlefield3.  :)  So I have uninstalled and reinstalled Easy, and deleted and re-pasted the newest version of the quester.  Still the same problem.  Is the registry overloaded with to many setups? from this script? I re-setup  for each OSI shard I run it on......While looking at the script the sub to get the exact ressource is amazing how you can use it for different things!  I'm a little lost on why we are looking at the Hue?  but that's besides the point.  Any Ideas on why mid run and forever more i can no longer run this script?  On a side note how do i delete the set-ups permenantly from Where ever Easy Puts them? In my order of things to diagnose that was my next step...  Any guesses or clues? Or could you throw 2.0 or how ever you guys have the full version my way?
  Cheers,
Xanderyum!
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on August 04, 2012, 07:50:56 AM
Are you sure you are getting your beetle ID set correctly?  With the bug in EUO, that can be tricky to get setup correctly.  Read down this thread to see the procedure.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Xanderyum on August 05, 2012, 10:50:25 PM
Yeah, I tried all that. I've never had a problem doing a setup with the quester before.  I also tried putting the Beetle ID in and NADA....Not Sure what is happening.  If the beetle ID isn't set up correctly, will that cause the quester to tell me My 90k Plain Boards to not be enough.  I've read the posts. So If your pulling your hair out repeating the same things over and over, well you won't need to. As I've done those things.  Hrmmm..........Anychance on the 2.0? or how t erase all the registry set-up files/
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: D on August 06, 2012, 03:55:49 AM
Hey TM, i had the same issue with beetle id but was sorted by doing the signle click on beetle to open context menu.

im having an issue at the moment when the first wuest is completed and i get the reward it just opens the bag an does nothing, if i move one tile it will continue by droping the bag on the floor and run untill out of boards, any ideas?
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on August 06, 2012, 06:54:12 AM
no idea.  Was it working before?

And currently we're not going to release the 2.0 quester.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Xanderyum on August 06, 2012, 07:11:57 AM
Yeah, I mentioned in my other post the scenario, where it was working, and what leadup to it not working.  I pretty much flooded the market on my shard for runic saws, and another shard for runic fletching kits, So I took a break from it for a month or so to let the market mellow out.  and that's when I tried it.  See above posts.  Cheers.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Xanderyum on August 09, 2012, 01:13:08 AM
Has anyone Had this script not "see" the boards in your bank or secure even when you had tons?  How did you remedy it?  Any questions you want to ask to eliminate all possible wrong clicks on my part is appreciated.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: jlirsh on August 15, 2012, 12:39:53 PM
Well took me awhile to get it set up. The beetle pack kept not working even after I had followed the instructions for it. Finally got it to work ran it for an hour and a half and got a heartwood kit :). Awesome Awesome Script man! I do have one question though, does it save all other runic kits? not at atll complaining about getting the heartwood one lol but figured I would get other ones before a heartwood and thats the only one i got.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: MeWonUo on August 15, 2012, 06:50:38 PM
Well took me awhile to get it set up. The beetle pack kept not working even after I had followed the instructions for it. Finally got it to work ran it for an hour and a half and got a heartwood kit :). Awesome Awesome Script man! I do have one question though, does it save all other runic kits? not at atll complaining about getting the heartwood one lol but figured I would get other ones before a heartwood and thats the only one i got.

It does collect all of the different kit types.  I've been running this on and off for the past few days and it hasn't missed anything.

Sounds like you just got lucky and scored a heartwood kit on your first drop. :)
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: jlirsh on August 18, 2012, 11:58:55 AM
haha sweet, first time ive ever been lucky in this game lol... but the day after easyuo went down and I havent been able to run it :(.. waiting patiently for them to patch it!!!
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Xanderyum on August 18, 2012, 01:51:47 PM
Yo, why you patching your Ish? after EUO is squared up and patched, just run UO.exe from the folder directly.  until the patch is a must, you never will have to patch...Just sayin'. I too rookied this problem, but not anymore. I have two folders, one is always patched so I can try out the new content when it's time. the other is one patch behind, so i can still Easy my way through UO.
Cheers,
   Xander
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: jlirsh on August 21, 2012, 10:39:00 AM
lol yea but my uoassist client will only go to the patched client.. i can start the reg client without patching but when i go to pvp which i did last week, I had to patch in order to use uoassist :(
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Grimfear on September 04, 2012, 09:33:41 AM
I am having some issues.  I have tried to setup my own rails using the guide that was posted I was able to get the transition from yew to HW to work but I cant figure how to get back out.  It will play backwards up to the portal then just stops and says waypoint is to far.

I decided to try using the hw-newtrinket.txt rail that is posted but when I start up the quester it just says I have "no default configuration for this character found" then goes on to say no rails found.  I changed the info to reflect the name as follows.

set %use_custom_rails #FALSE  ; change to true to load your own rails

if %use_custom_rails = #FALSE
{
  set %railbowcraft hw_bowcraft.txt  ; label = hw_bowcraft index=0
  set %railtrinket hw_newtrinket.txt    ; label = hw_newtrinket  index=1
  set %label_bowcraft hw_bowcraft
  set %label_trinket hw_newtrinket

Everything is in the same folder so I am not sure what else to do.  I have been searching through this entire thread trying things as I read them but so far nothing has fixed this for me sorry.  I am also trying to figure out to configure the quester, I am assuming once it detects a rail I will be able to but for now if I try hitting setup it does nothing.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on September 04, 2012, 09:54:12 AM
If you PM me your rail file, I'll take a look at it.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on September 04, 2012, 02:27:18 PM
Here's a forward/backward test script.  Just remember to change the filename and label name

Code: [Select]
set %railfile testrail.txt
set %raillabel label1
;------------------------------------------------------
set %railsubs tool_railengine30k.txt
call %railsubs TM_Initialize

call %railsubs TM_LoadRail %railfile
if #RESULT = #TRUE
{
  display ok Rail file not found
  stop
}

set #LPC 1000
  call %railsubs TM_RunRail %raillabel 0 END FW  ; finish running this rail from the present position to the end
  if #RESULT = #TRUE
  {
    display ok Rail error occurred.
  }
  call %railsubs TM_DetermineCurrentRailWaypoints
  set %temp #RESULT - 1 ; get the size of the waypoint file.
  
  call %railsubs TM_RunRail %raillabel %temp END BW  ; finish running this rail from the present position to the end
  if #RESULT = #TRUE
  {
    display ok Rail error occurred.
  }

call %railsubs TM_Close
stop
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Grimfear on September 04, 2012, 03:04:37 PM
Awesome thanks that actually is helping.  I can get newtrinket to load up through that script but the one I am creating and trinket2 gets a rail error. 

What would cause newtrinket to not be seen by the quester?  It loads up fine with claw and everything but keeps giving me the no rail found message.  Going to try and use it while I figure this portal back and forth issue out.  Just not sure why I keep getting waypoint to far.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on September 04, 2012, 03:08:03 PM
You may need to verify the rail label.  That's how the rail engine holds more than one rail in memory because they can have unique labels.  To verify a label, just load it into the rail developer and see what's what.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Grimfear on September 04, 2012, 03:40:47 PM
Ok I am running newtrinket you made through the developer and it works fine but the quester keeps saying no rails found.  As for my rail that is running fine just cant figure how to get it to go back through the portal.  It goes in runs down to the trinket NPC (thanks btw thought I had to use the arbs, those stairs kept messing me up.) and back no problem but once it gets to the portal it stops and gives the waypoint to far error.

Is there something I have to set as a namekind id for the return?  What I am doing atm is from the recall spot I use insert namekind for the portal so it finds it goes through and then I hit insert waypoint on otherside from there then walk down to the tinkers hit stop.

Thanks again for the help.  I am going through the PDF as I do this trying to learn as much as I can so I am sorry about all the questions.

Post Merge: September 05, 2012, 01:33:42 PM
Finally got my own rail script working and its recognized by the quester!!!  Now it runs and lets me go through setup but after I have gone through shown it my secure, dump bag, my bag, runebook, beetle it just does nothing.  The mouse goes into the upper left corner and nothing happens.  I have tried hitting save but that seems to do nothing every time I load up it still says I have no user configuration so I rerun setup each time.

One problem down now to figure this one out, btw incase anyone else is curious seems my issue with the portal was when I used namekind to go through it the waypoint was labeled VQV_Portal to heartwood so when it was going backwards it would get stuck.  The portal on heartwood side is portal to yew so I just changed it to VQV_Portal and bam it worked perfectly both directions.

Thanks once again with the help TrailMyx!

Post Merge: September 05, 2012, 01:21:21 PM
Ok got it running perfectly now, damn this thing is awesome.  Once I figured the portal out and the rail worked I did not realize the hang up on the setup was the beetles pack not opening which was mentioned before but did not click until I accidentally opened the context menu and it continued from there.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: lordraith on October 09, 2012, 10:52:48 PM
i've got a wierd new glitch i cant figure out. i havent run the script in a little while, so i went to go thru setup. it glitched at the beetle, like normal, and i opened the beetles pack thru the context menue to finish up, but its not done, its taking over my mouse and pointing to the upper left corner?!? im not sure what its trying to do here, i seem to remember all thats left in setup is remounting. i tried to remount and to leave it alone, but neither stopped the mouse from shooting to the corner every couple seconds, till i stop the script. any thoughts?
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on October 10, 2012, 08:07:04 AM
you don't have to remount, the script will do that for you.  Just help the script open the context menu for the beetle and it'll do the rest of the work.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: zorky on October 23, 2012, 08:53:19 AM
Is there a way to add a remount of the beetle when hidden so the beetle is also hidden and dismount only to get more boards out?
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on October 23, 2012, 09:16:04 AM
Sure, it's easy.  Give it a whirl...
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: zorky on October 23, 2012, 09:19:50 AM
Thanks I will try it out. I wasn't sure if it would cause chaos on other varibles the script checks on.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on October 23, 2012, 09:41:54 AM
Just remember to dismount before it does any of the beetle location checking and you should be fine...
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: d3v on October 29, 2012, 08:05:43 PM
i just reformated my computer , and redownloaded the script and all the componets , when i try to run setup , it asks me if im wanting bank setup which i say yes , then it says bank and just freezes , i have no idea why its not working , then if i choose home setup it gets to the beetle and when i click the context menu it just sits there and is frozen ;< help plz
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on October 29, 2012, 09:25:51 PM
Try changing you bank location and get closer to the bankers/minters themselves. 
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: d3v on October 30, 2012, 03:35:53 AM
the bank opens, when i actually press pause inside easyuo, it does not jump into where its at in the script as if its not even running anymore, usually when you pause it will be on the line where it is paused at , and as i said the bank opens, and when i do home setup , it gets through setup puts wood in backpack , then just does nothing
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on October 30, 2012, 07:28:06 AM
You'll have to give some more information.  When you go through the bank stuff, pause the script and then start single stepping the code to see where it goes.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: d3v on October 30, 2012, 09:42:41 AM
as i said previously , i just reinstalled windows 7 , im running client as admin , and easyuo as admin, when i start the script it and press setup , it says setting up for bank , i press continue , it then says bank and freezes, i literally have to close easyuo to rerun the program , when i press pause and do the step into , it does not goto the line that normally would show if you paused easyuo, im using the same exact verison of windows as well, ive tried easyuo in every compatibility mode possible , the only one i get a werid error is if i try to run it in windows 98/ME it says cannot find banker , i couldnt get it to work with that but at least it wasnt freezing up , ive seached google for a possible solution but all i get in topics is to run as admin  which im already doing... this isnt just for this script every script seems to not beable to read the uo client screen, like it does not interact , it will get to the make runic saws to make stools and when the menu comes up thats when it halts and is frozen , i cannot stop the script and restart it  i have to close easyuo entirely and reopen it
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on October 30, 2012, 10:52:39 AM
You might try posting at EasyUO because it sounds like you are having strange issues with EUO itself.  If admin doesn't work, and you can't revert to an earlier version of EUO, then I'm not sure what's going on.

Are you running on a freeshard or OSI?  What versions of everything are you running?  (i.e. EasyUO and Client)
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: d3v on October 30, 2012, 12:15:32 PM
OSI , latest Easyuo 227 , latest updated client... i just dont get it , i even installed windows xp on a partition and the same thing happened...

Post Merge: October 30, 2012, 01:14:09 PM
I believe I may have figured out why its not working correctly, should EXEPath show where uo is installed like it does for Curpath? in the paths tab , the only one with an actual path is the easyuo client, i have attempted to fix that like it says in the posting but im in windows 7 and im not quite understanding if im doing it right can anyone help me
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: blazehammer on October 30, 2012, 06:23:30 PM
there is a  problem with 227 version of easy uo that people have been using
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Black Widow on November 03, 2012, 04:35:10 PM
Hello All,
Does anyone have a rail for the Foot Stool Quest in Heartwood.
I have started the script, set it for the carp quest and my char goes to the trinket Quest.
I'm not the familiar with the making of rails however, if make one I will post it....
Thanks,
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: blazehammer on November 03, 2012, 08:22:50 PM
trinket one does the footstool quest
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Black Widow on November 03, 2012, 09:16:20 PM
Thanks BH,
I saw that after the postwasnt sure if it was correct....

Cheers,
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Guinness on November 14, 2012, 08:38:15 AM
hey :) So i tried using this in EasyUO and it will not do anything. Is there a tool I need to use this script other than EUO? I just joined this site to try things out and would love to get this working ;)
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Toptwo on November 14, 2012, 08:46:57 AM
hey :) So i tried using this in EasyUO and it will not do anything. Is there a tool I need to use this script other than EUO? I just joined this site to try things out and would love to get this working ;)


  Well, actually you have'nt joined anything yet. You might try reading the site rules, then following them, and we can see if we can fix that...but just comming for skriptz or helpz isn't going to cut it.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: gimlet on November 14, 2012, 10:10:17 AM
hey :) So i tried using this in EasyUO and it will not do anything. Is there a tool I need to use this script other than EUO? I just joined this site to try things out and would love to get this working ;)

So give us more information. What client, shard, EUO version etc.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Guinness on November 14, 2012, 10:18:19 AM
not just here for scripts my friend. Was also looking for a community of active players :) stumbled upon the script and tried to use it lol. yeah, I just read the rules board. Guess that should have been my first step, but was a bit confused on the site at first, but figuring a lot of it out now ehehe. Thanks :)
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Guinness on November 14, 2012, 01:08:32 PM
this script uo program looks pretty nice, and very complex lol
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Guinness on November 16, 2012, 09:51:38 PM
this is probably a stupid question, and I love starting out a question that way ;)

I have the CLAw and script running very smoothly now. I am having an issue with the Tali and Recip looting process. It only grabs some of the tali's and not very many and none of the recipes. How do i set the CLAw to get these items?
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on November 17, 2012, 09:06:02 AM
post your CLAw active rules so we can see what you are trying to loot.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Guinness on November 17, 2012, 11:55:51 AM
Any Exept Bonus Tali >=10
Any Bonus Tali >=10
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: gimlet on November 17, 2012, 12:02:54 PM
Any Exept Bonus Tali >=10
Any Bonus Tali >=10


That we keep way to many useless ones! (IMO)
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Guinness on November 17, 2012, 12:06:39 PM
what should it be set at? yes, i do have a *bleep* load of crappy ones to sort through. ehehe i wish i could grab the good recipes as well
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on November 17, 2012, 12:11:08 PM
You can keep the recipes if you know the name of them, and make a user rule without a magnitude (press the logic button until N/A appears).  If you want to keep all receipes, then just add the #FINDTYPE to the #FINDTYPE area.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Guinness on November 17, 2012, 12:21:41 PM
should i set it for like 20 or 20+ for both instead of >=10?
so say Exp bon tali >=27 (example)
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on November 17, 2012, 12:33:27 PM
really kinda depends on what you are looking for.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: gimlet on November 17, 2012, 12:37:04 PM
should i set it for like 20 or 20+ for both instead of >=10?
so say Exp bon tali >=27 (example)

I'f start at 25 or so and adjust if still too many.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: nikki on November 30, 2012, 07:02:42 PM
Once again needed this script to boost my vendor sales, and once again a thousand thanks! works great!
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: NObama on December 10, 2012, 09:01:12 AM
should i set it for like 20 or 20+ for both instead of >=10?
so say Exp bon tali >=27 (example)

I'd start at 25 or so and adjust if still too many.

Heck, if you're automating...why not limit it to 30% bonuses?  Those are really what you're after anyway!
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Nitros on January 23, 2013, 02:08:34 PM
Senks for script! ;)
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: filipok on February 20, 2013, 05:36:36 PM
please say how to download
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: NObama on February 20, 2013, 06:15:47 PM
Nope. 
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Ultima on February 20, 2013, 07:38:05 PM
Filopok you need to read the ScriptUO Rules (http://www.scriptuo.com/index.php?topic=1683.0). After you've done that proceed to the new members forum and introduce yourself to the ScriptUO community.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: kworth77 on March 09, 2013, 08:13:42 PM
Nope, not for me.

I looked at the quest engine, the rail engine, the pdf, and all support documentation. I've spent over 3 hours trying to get the railengine to work correctly. No luck. I can't even get it to start.

I don't use a beetle so no luck there.

I have 999 bolts in my pack for completing the lethal darts quest, so no need for carpentry or fletcher.

I simply want a script that will select the proper quest, toggle the bolts, complete the quest, evaluate the items, and repeat.

This has too many bells and whistles.  Has no one ever heard of the saying "Simple is better?"


Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on March 10, 2013, 07:34:36 AM
You must be playing a freeshard.  The bolt quest is worthless on OSI due to the timer, so all those bells and whistles are required to make it useful for the general masses.  For those people,this is a set and forget kind of script.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Ganesh89 on March 23, 2013, 07:39:49 PM
****And-the-Gate-wars have just begun...."

Hey TM

Just started using this....works flawless except I got some haters on my tail....(places bagballs in the way) and stands on my recall spot. So I designed my own rail (recalls into the yew tree....and walks up to the gate from there). The bagball problem I fixed with another account picking them up (reconfigured a simple reg picker). The hater has upgraded the tactics too tough....places now 200 logs into the bagballs so my picker can't move anymore. Which leads me to 2 questions:

1. I read about a quester 2.0 which allows alternate recall points...couldn't find it...probably my bad since I am busy altering the script in order to win the "Heartwood-Gate-Wars" any pointer would be very much appreciated.

2. Since the hater actually places the bag right on top of the gate and therefore blocking it from any access, simplest solution would be just to grab them and move them a tile away. Any pointers how this could be accomplished? Running my modified picker at same time as the hw-quester messes up my rail...plus I was tinking it's actually quite nice by the hater to bring me logs for my quest :) and I really would like to convert them to boards and take them along :)

3. I noticed in the travel sub there is an outgoing part of hw as well which calls up the same rail as the ingoing (running backwards), tried to modify that part into using another rail with another label but probably messed up with the %setrail function. A little pointer would be very helpful.

I am new to using scripts but with your PDF on rail-design and your other comments I got this to work fairly well. To all others (yes i read all 52 posts) CUSTOMIZE your rails!!! Nothing more stupid than 8 chars runing more or less on top of each other into HW!!! All a hater needs are 2 bagballs and your out of business :)!

Tx again for all the hard work that went into making this possible!!

G
 
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: vikesrock on April 21, 2013, 02:20:58 PM
Hey, just wanted to drop a short note and say thanks to TM and all the others who made this script.  The script is fantastic and I appreciate everyone's effort and the kindness to share it with everyone else.  Thank you.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: The Ghost on April 25, 2013, 06:56:55 PM
Do any of you guy have issue with not opening the  quest bag,  I need to open the reward bag because the script can't.  I have check to ensure I have the right ID.   It the only part that is broken right now, been like this for 3 weeks now.  any help will be nice.   Thx   

I have read few post back and haven't seen anything.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on April 26, 2013, 08:05:56 AM
****And-the-Gate-wars have just begun...."

Hey TM

Just started using this....works flawless except I got some haters on my tail....(places bagballs in the way) and stands on my recall spot. So I designed my own rail (recalls into the yew tree....and walks up to the gate from there). The bagball problem I fixed with another account picking them up (reconfigured a simple reg picker). The hater has upgraded the tactics too tough....places now 200 logs into the bagballs so my picker can't move anymore. Which leads me to 2 questions:

1. I read about a quester 2.0 which allows alternate recall points...couldn't find it...probably my bad since I am busy altering the script in order to win the "Heartwood-Gate-Wars" any pointer would be very much appreciated.

2. Since the hater actually places the bag right on top of the gate and therefore blocking it from any access, simplest solution would be just to grab them and move them a tile away. Any pointers how this could be accomplished? Running my modified picker at same time as the hw-quester messes up my rail...plus I was tinking it's actually quite nice by the hater to bring me logs for my quest :) and I really would like to convert them to boards and take them along :)  

3. I noticed in the travel sub there is an outgoing part of hw as well which calls up the same rail as the ingoing (running backwards), tried to modify that part into using another rail with another label but probably messed up with the %setrail function. A little pointer would be very helpful.

I am new to using scripts but with your PDF on rail-design and your other comments I got this to work fairly well. To all others (yes i read all 52 posts) CUSTOMIZE your rails!!! Nothing more stupid than 8 chars runing more or less on top of each other into HW!!! All a hater needs are 2 bagballs and your out of business :)!

Tx again for all the hard work that went into making this possible!!

G
 

The 2.0 quester is still only available to the Elites here at SUO.  There's no plans to release it at the moment.  Who knows what Christmas will bring however.  ;)

You should be able to mark a rune fairly far away from the gate in another direction, and the script will pathfind you to the gate.  This doesn't fix your bagball issue though.  For that you'll need to add a sub that scans the area for bagballs, and if one is located at the coordinates of the gate, you'll want to pathfind to the gate, drag/drop the bagball, and continue with the heartwood rail.  Not difficult, but it would require some additional code to fix.  It's funny that people don't mind breaking the TOS in order to harass people with bagballs (i.e. griefing.)

Heartwood rails are kinda difficult because the entrypoints/endpoints are not location railpoints, but actually looking for a particular object (i.e. "the sparkles") to get a location to rail toward.  You could put a separate entry and exit rail in, but you'll have to experiment with that.  It's never perfect for me either, so I always end up having to play with getting it right.  Just keep working on it and I'm sure you'll get it.  Just remember that the separate exit rail will be running forward instead of backwards.  ;)
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Ozzy on May 04, 2013, 06:14:13 PM
looking for some help.... recently the script picks wrong quests..Carp and fletch...i have used this script forever and recently added Tm's CLaw as well  ..however since last patch it hangs up once it has picked the wrong quests..i checked previous posts for a fix but havent read anything ..am i missing something?..im usually pretty good at finding and fixing so not to bother..however this has me stumped
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on May 04, 2013, 08:39:02 PM
Are you playing osi, Ozzy?
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Ozzy on May 05, 2013, 12:47:51 AM
yes i am
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Ozzy on May 05, 2013, 03:54:02 AM
hey TM since server up its working flawlessly Knock on Wood......guess my pc's were just trippin
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: The Ghost on May 05, 2013, 01:08:13 PM
TM,   Been trying to find why the reward bag, wont open in my mainpack.  Been like this for a while now.  Nothing new on my PC except a few UO patch.  I play OSI.  You think you can help me out and point me to the right direction.  thx lot
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on May 05, 2013, 01:26:11 PM
Have you tried to go through the setup again?
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: The Ghost on May 05, 2013, 06:27:38 PM
I reload the set up, try other shard.   haven't try to download or other PC.   Let try my other machine,
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Ozzy on May 05, 2013, 06:37:41 PM
Something is still up with mine ran 4 hours no prob.. then started pickin wrong quests again ..cant for the life of me figure out why it starts screwin up so many hours into it
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: bodfather on May 05, 2013, 07:27:54 PM
  It's a good idea to restart client and script every so often especially the larger more complex ones.

Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: bfs on May 08, 2013, 05:47:12 AM
on the setup by manually opening beetle actually fixed the problem and its running smooth!!
thank you for this excellent script!!!  :) :) 

*currently running on  7.0.30.3 ver. without any problem. rail works perfect too. I will post result on other thread as well.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: draken on May 23, 2013, 02:30:53 PM
Error Loading Configuration File.   I at least THINK ive looked at everything, cant seem to get it past there, any ideas on what to try?

Thanks for any help, btw TM every other script has worked maddeningly well that Ive used.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on May 23, 2013, 03:25:12 PM
Are you sure that's the error?  "Error Loading Configuration File" isn't in the script. 

There is a "No default configuration found for this character".  For that you just have to go through the setup and follow the instructions...
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: The Ghost on May 25, 2013, 06:23:01 PM
TM,  I run the file with my new machine and it work fine, so look like my old machine is to slow.   On a second note.  I need to get some smiting recipes and was hoping to be able to add the quest, but I run into a problem, can't figure out where all those number come from at the end. 
 set %CONTEXT_Toggle_Quest_Item 3603586
  set %CONTEXT_Open_Backpack 3428334
  set %QUEST_A_Simple_Bow 6415424
  set %QUEST_Arch_Support 5963096

I was wondering if you can explain how you get those plx.   wrist and hand are getting sore :) 
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on May 25, 2013, 07:47:42 PM
I can't really, but all the answers you're looking for are in the code. 

If you look at the subroutine that computes that magic number, a well placed "pause" command will show you what the script is calculating for each quest.  Noting the correct value will give you the information you need.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: jenovauh on June 01, 2013, 08:16:24 AM
I got everything setup and it is running correctly from opening the bank, transfer board to beetle, mount on the beetle and recall to Heartwood, Path finding to the quest giver, crafting the correct number of bows. The problem start here, it kept cycling through the quest even when it is at "A Simple Bow". I tried on few different computers with different monitor still the same issue. Any advise what I can do to fix it? Thanks in advance.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Bookwyrm on June 01, 2013, 08:46:23 AM
Before we get into a step by step breakdown of the problem have you gone over the checklist from the original post?




Please check these off before you request help on the forum
  • [  ] - You are running on OSI This script most likely will not work on your Freeshard
  • [  ] - Tamed and bonded beetle (bonded not really required, but nice when beetle dies)
  • [  ] - Raw Ribs if you would like your beetle fed at the beginning of script execution.
  • [  ] - Runebook with at least 3 runes marked. (Home secure, heartwood, logout) Does not support bank secure!!
  • [  ] - Lootbag in your main pack.  Please make sure this is a different container (big bag) than the bags dropped by the quest reward bag.  You run the risk of trashing your loot otherwise.
  • [  ] - Loot bag in your home secure MAIN LEVEL (when working from home secure)
  • [  ] - Runebook in your main pack
  • [  ] - All resources (boards, ingots, tinkering tools, carpentry tools) placed in the main level of your secure container and not in a bag.
  • [  ] - Tinkering skill sufficent to make tinker tools and crafting tools
  • [  ] - No tinkering?, then enough tinker tools and crafting tools in your home secure (tinker tools and joining planes, lots...)
  • [  ] - KEEP UO screen uncovered. This is so the OCR can see the quest (you can still use powersaver, but do NOT use a screensaver, or coverup the UO window)
  • [  ] - Rail engine requires that you not move the mouse during rail runs. Otherwise this will mess up your movement while riding a loaded beetle. Dedicate your computer to running this script by either just leaving it alone or running the UO session in a VM (virtual machine instance)
  • [  ] - 32-bit video card setup, will not function at 16-bits or 8-bits.
  • [  ] - Make sure you have placed all files (quester, looter, rail engine, rails, evaluator) in the same directory as your EasyUO executable. <-- Important!!
  • [  ] - Do not run this quester in full screen mode or the OCR functions will not work properly.
  • [  ] - Do not run UO Assist or Razor with this script!!
  • [  ] - Be sure to have your rune marked SOUTH a few steps of the gate, otherwise you may accidentally enter the portal before the rail engine is ready. (thanks marina)
  • [  ] - Be sure you remember to download the rail engine from the link supplied below
  • [  ] - Be sure you do not have Always Run selected.  You will need to walk with a loaded beetle.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: jenovauh on June 01, 2013, 09:24:54 AM
Yes I had went thru all the steps, I can tell it is the OCR not working for me. Do I need an extra OCR script or it is already buildin in EasyUO?
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on June 01, 2013, 09:27:02 AM
It's been a long time since I ran this, so I tried it just to make sure something hasn't broken.  For the public and Elite version, the script still works fine.  You'll have to run through what BW says because those are the main issues we've found over the years.  What types of video cards to you have, and be sure to check your settings.  32-bits is very important to be setup.  If you are running Windows 8, then I have no idea if this script will work.  I don't have nor will I own Win8  in its present condition.  ;)

Be sure you aren't running UOAssist, Razor, AssistUO, etc.  
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: jenovauh on June 01, 2013, 10:49:02 AM
Yes I actually read thru the whole thread, pretty sure it is the OCR not working. I will study the code and figure out if I can fix that. Cause it only stuck at cycling the quest over and over for like 30 min and still cycling lol.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on June 01, 2013, 11:04:29 AM
Are you on a freeshard for this?  The OCR is greatly dependent on a 32-bit video setting in your video card setup.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: The Ghost on June 01, 2013, 03:33:40 PM
Jenovauh,  make sure you don't have a fetching quest in your quest log.    I run this with win 7 and XP and it run just fine.  Make sure you don't have to much lag because that will cause the script to skip something without stopped it.    TM have build this one with some good foundation :).   Maybe try the Carpentry quest , see if this one work.


Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: The Ghost on June 01, 2013, 03:36:06 PM
TM.
I was expecting the answer you give me, but if you don't ask, you can't get.   I try a few month to change it and give up.  I will give it another good at it.    Thx for the hints.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on June 01, 2013, 03:50:47 PM
TM.
I was expecting the answer you give me, but if you don't ask, you can't get.   I try a few month to change it and give up.  I will give it another good at it.    Thx for the hints.

Do you know what the quest is called exactly? 
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: The Ghost on June 01, 2013, 05:57:19 PM
Cuts Both Ways, is the name of the quest that made broadsword.  the metal weaver is the quest  guy
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on June 01, 2013, 07:12:58 PM
Cuts Both Ways, is the name of the quest that made broadsword.  the metal weaver is the quest  guy

Ok, I'll check later to see if this is one that I've already digitized.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: jenovauh on June 01, 2013, 08:07:11 PM
I am playing in OSI and also have I does not have any quest on my character. Graphic are set to 32 bits, my pc is a 6 core 3.3GHz with 32GB DDR5. I doubt my machine could not run well. I will try carpentry quest and see if they are the same.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on June 01, 2013, 08:58:00 PM
What OS are you using?  I doubt you'd be running full-screen, but that does make a difference.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: jenovauh on June 02, 2013, 12:26:49 AM
Running on Windows 7 x64 and UO on windows mode, under the UO display setting show

Game Play Window Size 800x600. All the settings are default. I did not change anything there.

Also I tried the carpentry quest and are also cycling the quest over and over again for 30 min and i stop it.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: The Ghost on June 02, 2013, 07:56:49 AM
It look like the problem I have with the old quester. The script don't have enough time to see teh quest you need.   One of my older machine is slower on the internet and some script don't run properly. 

have a look here at line 1569.  may be some number got erase.   If not, yo might need to download it again. 

;========== SETUP SUBS ==========
sub Initialize
  set %CONTEXT_Toggle_Quest_Item 3603586
  set %CONTEXT_Open_Backpack 3428334
  set %QUEST_A_Simple_Bow 6415424
  set %QUEST_Arch_Support 5963096
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: jenovauh on June 02, 2013, 10:17:23 AM
I check the script and it is tally to the number you show. Re-download and try still same. Is the number for the set %QUEST_A_Simple_Bow 6415424 the timing to scan?
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on June 02, 2013, 10:49:56 AM
Since you've read the thread, you probably noticed there have been a couple people who just couldn't get the OCR stuff to work for some reason or another.  Never really figured that out, but for 1 out of 1000, you might just be one of those lucky few.  :(

At one point it seemed that certain ATI video cards were funky.  What's your video card?
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: jenovauh on June 02, 2013, 07:50:34 PM
Guess I am really the lucky one, using a HD 6800 series ATI graphic card. Anyway I will look around on how to write an simple OCR script to be sure if it is really my graphic card problem.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on June 02, 2013, 07:54:12 PM
I check the script and it is tally to the number you show. Re-download and try still same. Is the number for the set %QUEST_A_Simple_Bow 6415424 the timing to scan?

The is the "magic number" computed by the pixels found in the text area.  You can find that part of the code and see what the computed value of the magic number is compared to the value in %QUEST_A_Simple_Bow
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: jenovauh on June 02, 2013, 09:02:19 PM
Can you guide me on how I can insist a script into Heartwood Quester to output the magic number every time it cycle thru the quest? I tried a few but could not figure out. I am very newbie on scripting so please bear with me. Thanks again.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: jenovauh on June 23, 2013, 07:49:20 PM
Have anyone try to run this script recently? I still could not get this to work after testing on multiple PC with different graphic cards. I don't think it is my GPU problem as I had some nvidia and ATI to test. They all have the same problem which I strongly believe it is at the OCR portion which does not select on the quest and kept on toggling until I had to stop it. My scripting knowledge is really limited and could not fix this problem. Any expert can help and look into these? Thanks a lot everyone.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on June 23, 2013, 07:57:43 PM
I ran it the other day without issues.  With a script this widely used, you can imagine the input when it suddenly stops functioning.. ;)

Between line 2224 and 2225, put a "pause" command.  Monitor #RESULT that's spit out from NewSampleArea.  When the quest is selected, look at the value of the resulting value #RESULT.  Match that to the value that's loaded into !questval.  This is a way to customize it to whatever strange rig you have.  heh.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: jenovauh on June 23, 2013, 09:54:33 PM
I ran it the other day without issues.  With a script this widely used, you can imagine the input when it suddenly stops functioning.. ;)

Between line 2224 and 2225, put a "pause" command.  Monitor #RESULT that's spit out from NewSampleArea.  When the quest is selected, look at the value of the resulting value #RESULT.  Match that to the value that's loaded into !questval.  This is a way to customize it to whatever strange rig you have.  heh.

Thanks a lot for the help TrailMyx :), I will try that again when EasyUO is updated and feedback on the outcome.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: jenovauh on June 23, 2013, 10:34:15 PM
Hi TrailMyx, if i understand you correctly. Am I suppose to replace the value on line 1573 or 1574 depending on the quest I had selected after getting the unique value from #RESULT for !questval?
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on June 24, 2013, 04:55:30 AM
That's exactly right.  If the resulting numbers are different, then for some reason your rig is computing the magic number differently.  Just replace either of these numbers with your result and give it a go.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Crisis on June 25, 2013, 10:11:54 PM
This script is amazing!! Thank you for sharing it!!

It took me a while to try it out due to the fact that it has to be on top but I am glad I did.  ;D
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Bookwyrm on June 26, 2013, 05:13:12 AM


It took me a while to try it out due to the fact that it has to be on top

Yeah. Missionary gets boring after a while doesn't it?;)
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: jenovauh on June 26, 2013, 05:21:01 AM
That's exactly right.  If the resulting numbers are different, then for some reason your rig is computing the magic number differently.  Just replace either of these numbers with your result and give it a go.

Hi TrailMyx, to my surprise the #RESULT for all the quest that are being toggled are 2700. I do not know what I can do now. Any idea how to fix this?
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Crisis on June 26, 2013, 06:09:08 AM


It took me a while to try it out due to the fact that it has to be on top

Yeah. Missionary gets boring after a while doesn't it?;)

Exactly, but sometimes when you have that itch, you just need to scratch it.  :P
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on June 26, 2013, 07:43:14 AM
Hi TrailMyx, to my surprise the #RESULT for all the quest that are being toggled are 2700. I do not know what I can do now. Any idea how to fix this?

The only time we saw that was when someone was having video card driver issues.  I'm pretty sure you're SOL if that's the case.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: jenovauh on June 26, 2013, 08:18:05 AM
Hi TrailMyx, to my surprise the #RESULT for all the quest that are being toggled are 2700. I do not know what I can do now. Any idea how to fix this?

The only time we saw that was when someone was having video card driver issues.  I'm pretty sure you're SOL if that's the case.

Still dont understand why this will happen, I am using SOS master and s7BodFiller, i believe they are both using OCR also. If my graphic card driver is having issue. They should not work as well right? Confused.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on June 26, 2013, 08:20:30 AM
They use Kals OCR.  We don't.  I just never had a computer that exhibited this issue to debug in any way.  If I ever run across something that's wonky, I'd play with it.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Crisis on June 26, 2013, 08:25:50 AM
Hi TrailMyx, to my surprise the #RESULT for all the quest that are being toggled are 2700. I do not know what I can do now. Any idea how to fix this?

The only time we saw that was when someone was having video card driver issues.  I'm pretty sure you're SOL if that's the case.

Still dont understand why this will happen, I am using SOS master and s7BodFiller, i believe they are both using OCR also. If my graphic card driver is having issue. They should not work as well right? Confused.

Try checking your video card drivers. Make sure you have current ones installed. I am using tan ATI Radeon HD 4650 and it is running fine for me. I keep my drivers up to date. It might not help, but maybe it will.

TM, got my first Heartwood Runic Fletcher's Tool. Awesome script!!
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on June 26, 2013, 08:27:17 AM
Nice, Crisis.  I'm soooo glad they upped the drop rates of the saws.  Back in the day you could get 1-2 in 6 months! :o
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Hoby on June 26, 2013, 01:17:51 PM
Been running it for the last two days, no issues, well, not enough runics and no 30 skill tali's yet.  Best is a 27.  meh...
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: jenovauh on June 26, 2013, 06:14:18 PM
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: jenovauh on June 29, 2013, 08:10:47 PM
They use Kals OCR.  We don't.  I just never had a computer that exhibited this issue to debug in any way.  If I ever run across something that's wonky, I'd play with it.

TrailMyx, I finally got it to work on the same pc but I run UO in vmware lol. Thanks for all the trouble. :)

Anyway if I wanna change the script to make xbow, can I know which part of the script do I need to edit? Reason I am doing so it is because I am using a trial account and they do not have Arch support and A simple bow available.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on June 29, 2013, 08:41:20 PM
I was going to recommend that, so I'm glad that actually worked.  Anyhow, you'll need the magic number for that quest and adjust the click locations for the craftitem sub.  I'm traveling at the moment so I can't get more specific from my tablet.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: jenovauh on June 29, 2013, 09:51:13 PM
I was going to recommend that, so I'm glad that actually worked.  Anyhow, you'll need the magic number for that quest and adjust the click locations for the craftitem sub.  I'm traveling at the moment so I can't get more specific from my tablet.

Sure no problem TrailMyx and enjoy your trip. I will try to figure out and maybe when you are free then give me some advise. Thanks a lot.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: The Ghost on June 30, 2013, 08:34:37 AM
I miss the old day of Craftmatic. I did raised a few skill  doing the quest. TM have done a great job on this Quester  and have overtakes any other one out there. 
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: jenovauh on July 02, 2013, 03:38:44 AM
I found out that trial account are able to only do the quest once and cannot get the same quest after lol.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: jenovauh on July 02, 2013, 03:43:50 AM
I was going to recommend that, so I'm glad that actually worked.  Anyhow, you'll need the magic number for that quest and adjust the click locations for the craftitem sub.  I'm traveling at the moment so I can't get more specific from my tablet.

Hi TrailMyx, can I know is it possible to add sub to check the entrance/exit of Heartwood before zoning in and out? And pick up the wooden container that block the entrance/exit. Thanks again for the trouble.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on July 02, 2013, 06:07:31 AM
Hi TrailMyx, can I know is it possible to add sub to check the entrance/exit of Heartwood before zoning in and out? And pick up the wooden container that block the entrance/exit. Thanks again for the trouble.

Sure, anything is possible.  I remember discussion somewhere in this thread about someone wanting to remove bagballs placed around the heartwood portal.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: jenovauh on July 03, 2013, 01:41:21 AM
Hi TrailMyx, can I know is it possible to add sub to check the entrance/exit of Heartwood before zoning in and out? And pick up the wooden container that block the entrance/exit. Thanks again for the trouble.

Sure, anything is possible.  I remember discussion somewhere in this thread about someone wanting to remove bagballs placed around the heartwood portal.

Yes i read about it, only discussion. It was not release and also need some high level scripting to edit the rail to make it work. I am pretty sure I cannot make it lol.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on July 03, 2013, 11:35:39 AM
It would take some work for sure.  The rail engine is working in blocking mode, so it would take some significant re-writing to make it so the script can run additional code while it rails.  I guess another thing that you could do is write a small script that runs independently of the quester that's just looking for objects on the ground to grab that might block you.   Problem there is draging while you're moving will cause client crashes at an alarming rate. 

So lots of things to try.  Good way to learn to script!
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: The Ghost on July 03, 2013, 03:44:24 PM
Which shard is the gate block.   U can always recall before u start ur run.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Crisis on July 03, 2013, 04:13:20 PM
Which shard is the gate block.   U can always recall before u start ur run.
Good idea, thats what I was doing before starting. I usually stay semi-attended on this script anyways since it has to run without being covered.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: jenovauh on July 04, 2013, 01:36:13 AM
Which shard is the gate block.   U can always recall before u start ur run.
Good idea, thats what I was doing before starting. I usually stay semi-attended on this script anyways since it has to run without being covered.

That fellow is too free to put stuff to block the gate before and after zoning, recall does not help anything as either you cannot enter or exit through the gate.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Alpha on July 04, 2013, 05:16:43 AM
Just write a quick 2nd script that scans for blocking items at a certain X/Y location or maybe define a square around the gate by giving a range instead.  When it finds such an item you know someone is messing with you so IMO ultimately you really don't want to be scripting AFK so I'd just have it play a sound file to alert me & maybe display a message telling me what time it happened or some such..    That's what I did at least when some stealther pulled that stuff, but just admit to yourself that if someone is there to mess with you they will be able to outsmart a script & succeed heh.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: The Ghost on July 04, 2013, 03:42:17 PM
Is their something is the CoC that said that interfering with player play or any harassment form is illegal.   If you are running the quest often enough, I'm sure you can record the person putting the box their. 


The use of 5 pack horses is better, since you recall/ move less.  In my book anyway :)
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Bookwyrm on July 04, 2013, 03:54:59 PM
Is their something is the CoC that said that interfering with player play or any harassment form is illegal.   If you are running the quest often enough, I'm sure you can record the person putting the box their. 


The use of 5 pack horses is better, since you recall/ move less.  In my book anyway :)

Problem is that you are running a script which is illegal in and of itself. Were you to page a GM to complain about it you would no doubt end up in trouble yourself.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: jenovauh on July 04, 2013, 09:59:42 PM
Thanks for all the advises guys, I will see what is the best I write to counter this. Anyway I do not AFK running the script, so that player can not do anything about me but I think the other player who run the script might have problem lol. He is doing heartwood quest run but with like 4-6 accounts, the script seem to be difference from this one. Many time I saw all his runner just wait the the entrance cause it was blocked. Once I remove the blocked item, all the accounts run into the portal.

By the way anyone saw any script pattern as below before?

He will have a main account stationed at the quest NPC location ( maybe just scroll to the quest and turn in, cause I did not hear any sound  crafting any item), then about 3-5 accounts with character have a naming convention of "help XXX" ( all of those toon will recall to heartwood entrance and zone in, "running" on horse to the main account, then after sometime they will run to the trash bin without stopping and path to exit of quest wood, then it recall away and come back again.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Bookwyrm on July 15, 2013, 03:52:25 PM
So there I was. Having just run a lumberjacking script for the last 2 weeks I had a crapload of boards to burn through. So I thought to myself "Self, we should run the Heartwood Quester. That would get rid of some of these boards and generate some phat lewtz at the same time."

Please imagine my consternation when I went to get everything set up and could not find my carpentry skill. Anywhere. On any stone or any character! I know I had GM Carpentry, I have run the quester in the past many, many times.

*sad trombone*

I suppose I let the stone decay, lost it, or maybe set that skill to go down :'(

Oh well, now I have something to do with those boards.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on July 15, 2013, 03:55:08 PM
Fortunately you can GM carpentry fairly easy...  But nobody likes a change of plans..
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: The Ghost on July 15, 2013, 06:49:45 PM
WIth CEO Carpentry and 72K board you can have Gm Carpentry in less then 24 Hrs.  Same think happen with Lockpicking, Tailor and magic resist  Would think that I will learn the first time.  Never click the continue option.  :)  that what I have retain form that.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Bookwyrm on July 16, 2013, 04:21:19 PM
WIth CEO Carpentry and 72K board you can have Gm Carpentry in less then 24 Hrs. 

Was less than 12 hours actually. ;)
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: arphile on July 21, 2013, 02:00:36 AM
thx
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: sander on July 21, 2013, 02:19:37 AM
hi guys

i trying to get the script working but, i get always this massage ''no more tinkering tools'' :S weird
i have make all kind of tinkering tools but it won't work.

anyone have the same problem?
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: The Ghost on July 21, 2013, 08:33:58 AM
The thinker  tool  have to be in your main pack not in other bag. 
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Riley on August 21, 2013, 05:00:26 PM
Hi just wanted to check if anyone else is having problems with script running on windows 7? Everything works fabulous!  Just having one issue, I have to help the curser walk down to quest area once my character enters heartwood.  When rail pathfinder starts to walk the curser jumps to the left of screen and beetle gets fatigued.  I am able to help it along just pointing curser but will not path alone.  Thanks for the awesome script!
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: outoforder on October 04, 2013, 07:46:18 AM
This looks really interesting.  I will give it a try.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: dxrom on October 04, 2013, 07:38:43 PM
This looks really interesting.  I will give it a try.

I dunno... You're still restricted, trying to download a script here with that status seems sort of... out of order.

(http://fcdn.mtbr.com/attachments/california-norcal/805709d1370480032-should-strava-abandon-kom-dh-2790387-if-you-know-what-i-mean.png)
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Shinma on October 11, 2013, 08:43:19 AM
Why can not I see the script
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: dxrom on October 11, 2013, 09:05:01 AM
Why can not I see the script

Because you haven't earned the right to see it yet. I advise you to seek guidance within this thread http://www.scriptuo.com/index.php?topic=1683.0.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Shinma on October 11, 2013, 09:48:04 AM
Hmmm sorr but i write many many script on http://stealth.od.ua/forum/index.php my nickname Shinma. I write script on stealth for free and for all. hmm
I have a more humane ideas about how it should look. unexpectedly. If someone lay out the scripts for free, then why not all? what's the problem? it's more like the same as if the two boys show off in front of each other's pussy and do not show them to a third boy with the words - here only the elite. I put this on full access just than 90% of your forum.
Ppl go on stealth.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: dxrom on October 11, 2013, 10:02:41 AM
Hmmm sorr but i write many many script on http://stealth.od.ua/forum/index.php my nickname Shinma. I write script on stealth for free and for all. hmm
I have a more humane ideas about how it should look. unexpectedly. If someone lay out the scripts for free, then why not all? what's the problem? it's more like the same as if the two boys show off in front of each other's pussy and do not show them to a third boy with the words - here only the elite. I put this on full access just than 90% of your forum.
Ppl go on stealth.

That's nice, we always welcome more stealth scripters. However you still need to post an introductory post in order to have your restricted status removed.

http://www.scriptuo.com/index.php?topic=1683.0
Read that and then post an introduction here
http://www.scriptuo.com/index.php?board=20.0
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: vovey on November 01, 2013, 12:55:09 AM
how and where to download this script?
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Crome969 on November 01, 2013, 02:39:01 AM
how and where to download this script?
Check the post above your post
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: tauron vasarya on November 16, 2013, 06:57:56 AM
hi guys

i trying to get the script working but, i get always this massage ''no more tinkering tools'' :S weird
i have make all kind of tinkering tools but it won't work.

anyone have the same problem?

Hi everyone!
Today i tried this script.
I did everything that was writen in the beginning.
I click Start. And i saw ''no more tinkering tools''.



The thinker  tool  have to be in your main pack not in other bag. 

I have several Tinker tools in my main pack. Maybe i need to change ID of Tinker tools somewhere? (maybe they are not the same at shard where i`m paying), but i don`t know where. ((

Can you help me, guys?
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Bookwyrm on November 16, 2013, 08:31:39 AM


Can you help me, guys?

First Question! OSI or freeshard?
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: tauron vasarya on November 16, 2013, 08:46:07 AM
First Question! OSI or freeshard?

Freeshard
(OSI Style)
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on November 16, 2013, 10:22:48 AM
If your freeshard fails the basics, then getting this script running may be pretty painful for you.

But you've got the right idea, you can use a script like this to find those values:

http://www.scriptuo.com/index.php?topic=188.0

Also, if you have tinkering you can make them assuming you have ingots.

Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: tauron vasarya on November 16, 2013, 10:31:36 AM
If your freeshard fails the basics, then getting this script running may be pretty painful for you.

But you've got the right idea, you can use a script like this to find those values:

http://www.scriptuo.com/index.php?topic=188.0

Also, if you have tinkering you can make them assuming you have ingots.



Thanks.
I found ID of Tinker tools. It`s KTL, but i can`t find where they are set in script.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Crome969 on November 16, 2013, 11:04:49 AM
If your freeshard fails the basics, then getting this script running may be pretty painful for you.

But you've got the right idea, you can use a script like this to find those values:

http://www.scriptuo.com/index.php?topic=188.0

Also, if you have tinkering you can make them assuming you have ingots.



Thanks.
I found ID of Tinker tools. It`s KTL, but i can`t find where they are set in script.
SUOHWQuester 129.txt :
Line 1614:
Code: [Select]
   set %tinktools GTL_JTL_ and change to
Code: [Select]
   set %tinktools GTL_JTL_KTL

I never used this Script. Call it some kind of Service :)

Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: tauron vasarya on November 16, 2013, 11:07:36 AM
Thank you very much.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Larppa on November 23, 2013, 10:23:34 PM
Had to try this script since it seems to be the greatest attraction to this site for some people (thus the cat banner down at the page n'all :D). Basicly it works right off the bat even on the runuo i play on, only problem i encountered is with the rails. I fixed the returning part (HW -> Home) to hit the gate and that way it works perfect but when it restocks at home and tries to return to HW it sometimes misses the gate.

This seems pretty interesting since the entrance gate is hardcoded to the rail (and its VQV here too, i did check that). Any ideas what to try next? Changing the recall spot? also, seems like it never fails to enter when i start it the first time, only when it has done a cycle or two and is returning to HW from restock.

Oh, and thanks for another script, works like a train toalet (that being good) :P
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on November 24, 2013, 12:00:49 AM
On your free shard can you just recall in and out ?
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Larppa on November 24, 2013, 02:14:04 AM
Too bad that isn't possible, it would had been easy to fix this situation. I'll try to play around with the rail a little more, as it seems that's whats causing the issue.

Weirdest thing is that it does succesfully restock sometimes (ofc when i'm on the computer and able to see whats going on).
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Larppa on November 24, 2013, 02:18:24 AM
Oh i think this might help debugging it, my rail currently like this:

spot 1 - In yew, 4 tiles from the HW gate
spot 2 - In yew, next to the HW gate, with the VQV label (its the same spot than in the default rail, i just modified coords for spots)
spot 3 - In HW, again 1 spot from the entrance gate

from spot 4 on its just the long walk to bowcrafter

Could the problem lie in these?
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on November 24, 2013, 10:20:32 AM
Really that isn't too much different than OSI/EA.  Any error text that pops up? Changing the recall spot might help.  But be sure it's south of the portal.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Larppa on November 24, 2013, 10:45:17 AM
I think i got it, i marked the recall rune just 2 tiles from the gate in Yew and now it has been up and running for about 4 hours. I did mess around with the rail a bit too, not truly sure what fixed it but imo the destination matters more than the trip, huh? ;p

Hope you don't mind if i try to get it to turn in bolts too, would be faster to stock some bolts along with boards and do both quests. :) Will post it here ofc if i get anything useful out of my experiments..
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on November 24, 2013, 10:49:09 AM
 8)

Glad you got it.  Fiddle away with the script; we love when people bend them to do their own bidding.  heh
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Larppa on November 25, 2013, 02:19:42 AM
Seems like i were too optimistic earlier, over night the problem showed up again and when i woke up my toon was sitting in Yew again and wondering why he can't reach next waypoint. :P It apparently runs back into the gate when its on the Heartwood side of the rail enroute to quest npc's.

Is the 2nd rail spot supposed to be on the same coordinates with the portal or just next to it? When the script returns from HW to restock, is it supposed to run straight into the portal or pathfind next to it and then enter it when it looks for spot 1 (which coordinates are on the Yew side, but has the VQV label so the script may look for the object) ?
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: 12TimesOver on November 25, 2013, 04:36:52 AM
I ran into the same issue myself just the other night Larppa, the spot I marked in Yew worked fine for a couple hours then, mysteriously, the script could no longer move to the gate anymore from that spot. I marked a new rune just one tile south of the gate and ran for several days without issue.

X
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Neftis_RJ on November 27, 2013, 01:52:43 PM

Can anyone help me with this script?

I have followed all requirements to run it (including copying the txt files to my EasyUo directory), but after i finish setup (home secure, bettle, loot bag) and press Start, nothing happens, except that my arrow point keeps moving to the left top of my UO screen.

Anyone have a clue of what Im doing wrong?

Thx
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on November 27, 2013, 04:44:37 PM
What shard are you playing on?
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Larppa on November 28, 2013, 01:44:07 AM
I think my problem was caused by the fact that on my shard you don't spawn right on top of the gate but like 2-3 tiles away from it so in order to use only 1 rail for all the movement i had to mark a spot on both sides of the gate and then sometimes my character ran back into the gate causing it to get lost. Now what i did was to modify the script to support different rail for each way and now the script runs perfectly (or has ran for like 48 hours straight ;p)

Here's the rude method i used to hardcode my little rail into it. Uses a new rail i made with the railengine.

Spoiler: show
  ;===== Walking Rail into Heartwood =====
  set #LPC 1000
  call %railsubs TM_RunRail %label_bowcraft 0 END FW  ; beginning to end
  if #RESULT = #TRUE
  {
    display ok Rail error occurred.
  }
  set #LPC 10
 
return

;===== From Bowcrafter =====
sub frombowcrafter
 
  ;===== Walking Rail out of Heartwood =====
call %railsubs TM_LoadRail bc_to_yew.txt
wait 5s

  set %temp #RESULT - 1 ; get the size of the waypoint file.
  set #LPC 1000
  call %railsubs TM_RunRail hw_bowcraft_back 0 END FW  ; end to beginning
  if #RESULT = #TRUE
  {
    display ok Rail error occurred.
  }
  set #LPC 10 
  wait 2s
return
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Neftis_RJ on November 28, 2013, 03:04:37 AM
What shard are you playing on?

Im playing Origin, greatlakes shard.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on November 28, 2013, 09:26:58 AM
Sounds like it's stuck trying to open your beetle pack.  Follow the instructions very carefully to make sure you initialize the beetle pack correctly.

BTW, here's the link to the beetle pack work around:
http://www.scriptuo.com/index.php?topic=374.msg48553#msg48553
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Neftis_RJ on November 28, 2013, 10:56:05 AM
Sounds like it's stuck trying to open your beetle pack.  Follow the instructions very carefully to make sure you initialize the beetle pack correctly.

BTW, here's the link to the beetle pack work around:
http://www.scriptuo.com/index.php?topic=374.msg48553#msg48553

Alright, Ill try that. Thx

Post Merge: November 28, 2013, 12:00:34 PM
Sounds like it's stuck trying to open your beetle pack.  Follow the instructions very carefully to make sure you initialize the beetle pack correctly.

BTW, here's the link to the beetle pack work around:
http://www.scriptuo.com/index.php?topic=374.msg48553#msg48553

Alright, Ill try that. Thx

Thx! Its working fine! Just had to open bettle myself!

The script is awsome!
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Grandewd on December 04, 2013, 11:01:24 PM
Love seeing you so active here, TM.... 
Always interested in code feedback and you're one of the best at that...

Just sayin....
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on December 05, 2013, 07:38:12 AM
Love seeing you so active here, TM.... 
Always interested in code feedback and you're one of the best at that...

Just sayin....

Heh, thanks for that.  You'd expect I'd be uber-bored by now.  I guess this is a labor of love, or I just lead a pathetically dull life.  Probably a combination in there somewhere. 
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Oracle on December 16, 2013, 03:09:07 PM
TM,

Script was working fine until somehow my Beetle died while doing the Quest inside Heartwood Felucca.  When I rezzed my Beetle I went thru the setup again just to make sure all of the ids were correct.  What happens now is that when I get to Heartwood, I will jump off my Beetle at the Bowcrafter, hide, then 10 seconds later mount my Beetle again and it goes all the way back home opens everything and starts over creating a vicious cycle.  What might be happening or am I missing anything?

Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on December 16, 2013, 03:12:18 PM
Sounds like your setup isn't correct still.  Go though it again.  Also you may want to double-check the values by hand for the beetle and the beetle pack.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Oracle on December 16, 2013, 07:02:04 PM
Thanks TM,

I went thru the set-up again and also checked the values by hand to see if they matched.  I also noticed that the Quest was already selected, so I quit the Quest before starting the Script and it worked perfectly...

Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on December 16, 2013, 07:18:26 PM
Thanks TM,

I went thru the set-up again and also checked the values by hand to see if they matched.  I also noticed that the Quest was already selected, so I quit the Quest before starting the Script and it worked perfectly...



Oh yeh, that quest thing will get ya!
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: gubass on December 28, 2013, 05:03:12 PM
hi guys I have 2 problems =[.
firstly imm on osi shards .
ivve been away from the game for a few years so plz excuse my ignorance/stupidity.
ivve read through every page and cannot find a fix for my ist prob witch is
ivve run setup multiple times the script for me when I start it trys to recal off the runebook to the default location evertime  and not to heartwood if I set default to heartwood it runs fine until it has to recal back so not switching rune locations a little hlp in this prob would plz a old man a lot hehe .
imm using windows 7 /64 bit intel machine set to 32 bit as far as I can see.
anyhow anny imput to my prob would be great=]
ps I used to use this script a lot and think its the beees knees =]
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on December 28, 2013, 05:15:54 PM
The recall subs set the rune index to default and then recalls from that point.  You need to set the rune index in the UI to the one that corresponds to the location in your runebook.  1=first rune all the way to 16=last rune.

If this confuses you, go buy a new rune book and mark a rune to heartwood, the bank and an inn.  Put the heartwood rune in the book first, followed by the bank rune and finally the inn/safe rune.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: gubass on December 28, 2013, 05:43:39 PM
hia ty for the very fast response.  :)
ivve just got new book and set the runes to match  the ui  so they match but it still only recalls to what the default rune is set to example being I put it to my heartwood rune then started script.
it done its stuff altho not got it picking up and placing boards in beetle yet then it recalled to heartwood ran to qhest noticed no boards so went out and recalled to heartwood and not my house rune even tho there set it doesn't seem to swap to needed runes .
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on December 28, 2013, 07:59:44 PM
Sounds like you just need to keep playing with it until you figure it out.  You may have to single-step through the code to see what's happening and were it's going wrong for you.  Sorry for no real answers, but you get what you pay for.  ;)
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: gubass on December 29, 2013, 01:18:18 AM
I will thanks for the help :).
ivve spent 6 hrs or so on it it seems that after opening the book gump it s not klilking in the right x/y location to get to the runebook page up to klik default location.
Annyway ty for the super fast response and keep up the good work it really is apreiciated =]

Post Merge: December 29, 2013, 06:30:02 AM
just a heads up I found my problem :)
script working great not using claw loot yet but heck I have 1 of each runic so far .
This numb nutz downloaded the wrong easy uo lol. Aint it amazing how a hour or 2 away from ur issue u can think more clearly and check the obvious !
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: hurricane on December 29, 2013, 04:43:14 PM
Nice work

Post Merge: December 29, 2013, 05:03:00 PM
It's been some time for me and UO and after 6 years of not playing I need to re build my scripts... if this is the same script i used for the runic kits years ago then my hat is off to you sir.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: mariete on January 05, 2014, 09:57:14 AM
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: andrechaves on February 23, 2014, 07:27:08 AM
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on February 23, 2014, 10:37:11 AM
If you read the first post, first requirement, this script is for OSI shards and not for free shards.  People have gotten it to work on their own freeshard, but that's completely up to them.  Your freeshard probably has the screen coords different for the click locations, so you'll have to pretty much work that problem out yourself.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: andrechaves on February 23, 2014, 02:03:27 PM
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on February 25, 2014, 07:54:30 AM
Really you need to go through where the subroutines are called for "OffsetClick" and validate the locations.  Using a tool like ScriptUO, you can easily surf through the code and find the locations.  Here's a cut/paste from the Find/Replace gump:

Code: [Select]
720:     gosub OffsetClick 233 68 r
823:       gosub OffsetClick %make_last_x %make_last_y dmc ; make last
837:     gosub OffsetClick 234 130 r ; close it, request complete.
844: sub OffsetClick
1014:     gosub OffsetClick 131 464 dmc
1016:     gosub OffsetClick 131 464 dmc

You'll just have to get to understand the flow of the code and perhaps even "pause" and single step through the code to see how it functions.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Grandewd on March 20, 2014, 03:05:38 PM
Curious as to whether anyone has modified this to work with a gargoyle that has a beetle but can't ride it?  My crafter is gargoyle and I'm trying to avoid raising carpentry on another char just to do the carpenter quests.....
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: dxrom on March 20, 2014, 03:11:20 PM
Curious as to whether anyone has modified this to work with a gargoyle that has a beetle but can't ride it?  My crafter is gargoyle and I'm trying to avoid raising carpentry on another char just to do the carpenter quests.....

soulstone tinkering+carp to dif chr.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Grandewd on March 21, 2014, 12:16:15 PM
Sorry, I'm on Siege.... can't do that.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: kaos91 on March 22, 2014, 03:39:09 AM
someone managed to modify it to FS? or DEMISE? O.o
Ty all!
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: kaos91 on March 22, 2014, 11:13:55 AM
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Skootah on March 31, 2014, 06:02:45 AM
hey trail. im having trouble with running this whole setup... trying to do the bowcrafting one...  ill explain my setup and maybe u can tell me what im doing wrong.

First: i open EUO(as admin) and get all the scripts i need(or so i think) (Quester 129, HM_Bowcraft, HM_Trinket, SampireClawSetup, and Tool_RailEngine30k)

Then, i open up a regular UO window(No razor or uoa. and yes in 2d)

i turn on all the scripts except for the quester after im logged in.

once i press play on the Quester Script.... two popups come up.
One says "No default configuration found on this Character" and the other says "Cannot Locate 'Tool_Railengine30k.text"

i have all the scripts in a folder named HWQUESTER on my desktop....  I cant figure out what im doing wrong....  any pointers?  thank you

(ive spent 8 hours trying to figure this out with absolutely no luck
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on March 31, 2014, 08:07:21 AM
Did you put all the files in your EasyUO directory?  If you want to put everything in a separate directory, then be sure you move or run a copy of EasyUO from that directory.

The no configuration is normal and should go away once you get a chance to save your config.  

Follow the check list closely on the 1st post.  Just about everything possible that can go wrong, HAS gone wrong and has been captured in that list.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: brokensaber on April 14, 2014, 12:34:57 PM
I've tried and tried (OSI) It just doesn't work.  All files in same directory.  Is it updated to the current client?

Is there a simpler script without all the recall/rail support?  I can haul my own resources in, just want to save some clicking.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Crisis on April 14, 2014, 12:39:19 PM
I've tried and tried (OSI) It just doesn't work.  All files in same directory.  Is it updated to the current client?

Is there a simpler script without all the recall/rail support?  I can haul my own resources in, just want to save some clicking.

What does it do before stopping? I ran this just a couple of months ago and it ran like a champ. I got a bunch of runic fletching tools and saws with this in just a few hours including a heartwood fletcher's kit.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: brokensaber on April 14, 2014, 12:44:45 PM
I just get a dead menu. I initiate the Claw, load, start the quester, Get the no default setup file message and a no rail message, even though I have the rail.  all files in same folder as euo
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on April 14, 2014, 01:54:53 PM
The no rail error leads me to believe that you still don't have the correct directory.  You actually have to run the EasyUO version from the directory where your rails are.  Don't just put a copy of EasyUO in the directory and then run your existing EasyUO link.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on April 14, 2014, 02:07:28 PM
BTW, I just ran the script on a new character with a new setup.  Worked great.  Railed in, did my thing and railed out.  I did this on an OSI shard.  There has to be something you're doing wrong on your end, friend.

The only tricky thing is the beetle bag setup, but you can locate how to do that in a post located below this one.  The rest is point/click.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: beaunos on April 14, 2014, 03:58:32 PM
Would run Fine on desk  windows 7 top but it would not run for laptop  windows 8.1 , Clicked properties and set compatible to xp pack 3 and it worked fine don't why just does  ,
of coarse im still tweaking wait times due to crappy conn lol
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on April 14, 2014, 04:45:30 PM
Yes, good point.  I'm running Win7 Ultimate here also in Admin mode.  Nothing else special.  I don't have Win8 anywhere in my house.  For a good reason.  :)
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Crisis on April 14, 2014, 05:13:03 PM
I am liking win 8.1 so far.  :P

I just built this computer and have not run any scripts on it yet. I will try and run this script in the next couple of days to see if and how it runs on win 8.1
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on April 14, 2014, 05:59:55 PM
I will continue my negative Windows 8 commentary until someone from Microsoft contacts me with a free copy.  :)

I continue to wait......
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: brokensaber on April 14, 2014, 06:30:20 PM
That's what I have is win 8.1.  I do have all the files in one directory and I launch by going to the directory and usually I run as admin.

I'll dig into this more.

Post Merge: April 14, 2014, 07:19:01 PM
Well no luck, I wish craftomatic was still around.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on April 14, 2014, 08:12:54 PM
Chances are probably good that craftmatic will have issues with Win 8 also.  It's a pretty simple script though, so who knows.  Perhaps one of the Win8 weenies here might have some insights to help you get it going.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: The Ghost on April 14, 2014, 08:31:44 PM
craftmatic still work but it 10 time slower on finding the quest then your build.   Maybe Win 8 required to have all tab to run at admin. 
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on April 14, 2014, 09:13:02 PM
How much are saws going for these days?
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: beaunos on April 14, 2014, 11:34:22 PM
I had to go and left click the file , go to properties of file itself and change to make it work for me.
I do not have to do with all the files just certain ones that don't seem to jive with windows 8 I do it on a as needed bases.
p.s. don't really know what sell for I use for building suit and bows  ;D
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Tidus on April 15, 2014, 08:37:46 AM
Saws are pretty cheap.  Ash Fletch go for a good amount.  I am the only one selling on Pac lately.. so it has been hard to gauge the selling price because i have had to fluctuate it so much to just get them sold without them sitting on my vendor for a long period of time.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: brokensaber on April 15, 2014, 08:41:17 AM
Ash Runic Saws are going through the roof because they make good -15 Mage Weapons through reforging with 1-2 properties, leaving 3-4 to imbue sc,fc, dci on them.

last week they were selling for 200k, last 3 days I have seen them jump up to 600k, 700k yesterday and people are hoarding and combining them, today selling for 1.5 mil 70 charges, others trying to sell 35 charges at the same price.

btw is there a way to get craftamatic?
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Tidus on April 15, 2014, 08:47:42 AM
That's what I have is win 8.1.  I do have all the files in one directory and I launch by going to the directory and usually I run as admin.

I'll dig into this more.

Post Merge: April 14, 2014, 07:19:01 PM
Well no luck, I wish craftomatic was still around.

Have you made EUO run as Windows XP SP3?   With windows 8 it does not fully support EUO calling scripts.  Unsure why it does that.  I have a specific folder for my HW quester that has EUO in it with all the files and rails.  I had to take the rails out of their own folder (which it is put into its own folder when you unzip them) and put them with all the other files. I also had to put CLAW into that directory also.  Then i made the EasyUO.exe run under that directory with it marked as admin and XP SP3.  Also i had to make sure i was running UO as admin and XP SP3.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: sheepgto on August 25, 2014, 09:12:34 AM
 ;)wooo~~ new script ,try it ,thx
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: taibune on August 27, 2014, 08:09:59 PM
;)wooo~~ new script ,try it ,thx

me too ty very mush
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Bookwyrm on August 27, 2014, 08:42:59 PM
While your enthusiasm is appreciated taibune, you should not be able to have downloaded the script yet. It does not appear that you have gone to the introduction thread and given us an intro post from yourself. Once you do that you will be able to access the scripts on this site.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Ozzy on September 09, 2014, 05:34:42 PM
lmao BookWyrm!!!!!! thats funny right there lol
Title: Re: ScriptUO Heartwood Quester 1.21 with Advanced CLAw support
Post by: towelienzz on September 16, 2014, 02:51:19 AM
how do i down load it?

Post Merge: September 16, 2014, 02:54:35 AM
how do i down load this script? any 1
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Crisis on September 16, 2014, 02:54:40 AM
Two posts up already answered that for someone else.

While your enthusiasm is appreciated taibune, you should not be able to have downloaded the script yet. It does not appear that you have gone to the introduction thread and given us an intro post from yourself. Once you do that you will be able to access the scripts on this site.

QFE!
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Samuo on September 18, 2014, 06:30:33 PM
hey all
ok i got it working to where it pathfinds to the trinket quester then it keeps just clicking the quester. but instead clicking on arch support it keeps skipping it and just keeps going through all the quests?? any ideas
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on September 18, 2014, 10:22:03 PM
Which shard are you playing?
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Samuo on September 18, 2014, 10:32:51 PM
its free shard but osi style. like i got the script to work recall in path find to the quester and just keeps going through the quests and not clicking any
 set %QUEST_Arch_Support 5963096 the code 5963096 is different on my shard and not sure how to find the right 1.


it keeps getting stuck here

SelectQuest_loop1:
    set #LOBJECTID !findid
    event macro 17 0
    gosub Gumpwait generic_gump generic_gump
    if ! ( #CONTNAME = generic_gump && #CONTSIZE = %quest_gump_size )
    {
      click 0 0 mc n
      wait 5
      goto SelectQuest_loop1
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on September 19, 2014, 07:49:00 AM
OSI style doesn't really mean anything since the gumps can be different.  If you locate the sub that actually does the pixel computation and monitor the returning value, you can determine what the value *should* be for your shard.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Samuo on September 19, 2014, 09:21:14 AM
umm ive only started learning baisc scripting but getting better but have no idea how to do that. do u have any susgestions on how i can do that thanks.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on September 19, 2014, 11:42:24 AM
See, this is exactly why we DON'T support <insert your freeshard name here> shard.

To get you going, take a look at the SelectQuest sub and specifically this code:

Code: [Select]
...
    gosub NewSampleArea NULL !clickxposition1 !clickyposition1 !clickxposition2 !clickyposition2 8701514
    if #RESULT = !questval
    {
      set !clickxposition1 !sampled_CONTPOSX + 131
      set !clickyposition1 !sampled_CONTPOSY + 464
      click !clickxposition1 !clickyposition1 f
      namespace pop
      return #FALSE
    }
...

Look at the values returned by NewSampleArea.  See how they are compared to !questval?  How do the values you're computing compare to the value contained in !questval?  You'll need to figure out how to pause the script and single-step through the code.  I can't teach you that - you'll have to figure those basics out on your own.  It's not hard if you try a little bit.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Samuo on September 19, 2014, 03:43:48 PM
yeah i can do that put a pause in it. now im going to sound like complete idiot sorry when i run it through easy uo nothin changed in the script i cant see any code changing and i try to run in though the script uo program but it says run mode disabled??? should i be able to see the code apear through easyuo. thank tm and sorry again

Post Merge: September 19, 2014, 05:21:18 PM
which servers do u play? i tryed the script on oceanic server from uo.com and the script still keeped going trhrough the quests :(.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on September 19, 2014, 06:50:53 PM
ScriptUO is just a code editor and doesn't run stuff.  Any changes you make with it you'll need to save and open with EUO.

I play a bunch of other OSI shards.  There is a small number of people who can never get their setup working for some reason.  Has to do with their OS, video card, video card settings, etc.  Sometimes they just never figure it out.  Did you go though the check-list on the first post?

I don't know anyone who's tried this with Windows 8.  I generally run this with WinXP and Win7
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Samuo on September 19, 2014, 06:54:46 PM
yeah im lookin for a server with alot people on it. yeah i tryed the first thing and nonthin changes in uo. im running windows 7 and computer is pretty good

Post Merge: September 20, 2014, 01:27:49 AM
umm i have 1 last idea. do u use a fully patched client with this?? cause i have a couple of ultima onlines installed cause the full patched doesnt work with easy uo for some reason??


ok so the #result on the right doesnt change atall its just stays n/a

do u use the lastest version of easy uo? 1.5.1.268?
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Crisis on September 20, 2014, 09:33:46 AM
The newest easyuo client is 1.5.1.269, you may want to download the new one and try again.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Neftis_RJ on October 02, 2014, 01:11:36 PM
The newest easyuo client is 1.5.1.269, you may want to download the new one and try again.

After this new patch, I cant seem to run it well. My char keeps running even though the box for "always run" in option is not marked up.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Ozzy on November 22, 2014, 05:36:26 PM
Anyone runnin windows 9 ?   euo cant seem to locate rail engine !!!! no matter what i try  uggggh
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on November 22, 2014, 10:16:30 PM
Anyone runnin windows 9 ?   euo cant seem to locate rail engine !!!! no matter what i try  uggggh

Windows 9!?!?!?!  God help us all!
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Crome969 on November 23, 2014, 02:18:11 AM
Anyone runnin windows 9 ?   euo cant seem to locate rail engine !!!! no matter what i try  uggggh

Windows 9!?!?!?!  God help us all!

Windows 10. Microsoft skips 9 and directly develops 10.

So far it took the best from 7 together with the best of Windows 8.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on November 23, 2014, 09:46:05 AM
So far it took the best from 7 together with the best of Windows 8.

Best of Windows 8, eh?  For me that would be the installation DVD flies nicely and makes for a great skeet target!
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Kandie on November 23, 2014, 11:47:29 AM
uh oh  having problems here........either when I start script it says same as Ozzy can't find rail engine or next time I set it says no boards found.... halting, and I have plenty boards  in secure....hope its a easy fix :)  cuz I love this script....thx TM
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Kandie on November 23, 2014, 12:19:25 PM
ok now, when I start script heres what happens....gets to the part where it should put boards on bug and says:  container can't hold anymore weight- it then takes off and runs down to heartwood quester, jumps off bug, realizes there are no boards and returns home, jumps off bug and says not enough boards to run script, halting..........and I have plenty boards in secure.....seems like mine is all messed up  :'(  I have tried fixing myself, just really don't know what to do.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on November 23, 2014, 03:18:05 PM
Sounds like you need to re-run the guided setup.  Did you bug die or is it new?  Also be sure there's nothing else on it.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Kandie on November 23, 2014, 03:27:11 PM
no bug didn't die and yes he's new and yes I redid the guide set up
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on November 23, 2014, 03:33:13 PM
Sounds like the pack didn't get setup correctly.  It's a pain, you might have to repeat it several times.

Remember there is a trick:
http://www.scriptuo.com/index.php?topic=374.msg48553#msg48553
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Kandie on November 23, 2014, 03:56:34 PM
welp went to that link did exactly what it said and still says can't hold anymore weight, maybe my char and bug are bugged, maybe I have to call a GM.......and I am on a slow shard, arirang prolly won't get an English talking GM....
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Kandie on November 24, 2014, 10:05:32 AM
I am thinking with this last patch something messed up the heartwood questor, becuz  now I tried it on my second computer and still says bug can't hold anymore weight and she is empty....any  and I did the bug link u sent....still doesn't work. suggestions?
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on November 24, 2014, 02:17:47 PM
Ok, you made me actually fire this up and run it.  Probably the first time in more than 2 years.  Seems to work fine for me.  I went through a couple runs without issue.  What version of EUO are you using?  And what Windows?  Something is different for you for some reason.

Edit:  I went back through and re-ran the guided setup.  This also works fine as well.  When you bring up the bugs context menu, DON'T select the Open Backpack function.  Let the script do it; there is a delay, but the script *is* working....
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Kandie on November 24, 2014, 06:50:45 PM
euo280  and both cmputers are windows 7
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on November 24, 2014, 11:12:17 PM
euo280  and both cmputers are windows 7


Same here.  Wonder what other differences there are?  Worked fine.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: ayretimr on November 25, 2014, 08:09:16 AM
Good Morning.  TM..
that's my first time to seek yr assistance, hoped that u can solve my problems.

regarding for Heartwood quester 1.29
1) i had been saved all the files into the EUO' script & run it, however, the result is " TM_CLAw has not been initialized, do u wish to proceed with BMEVAL", once i pressed "Yes" , the result of message is "No default configuration found for this character", then i pressed "Confirm", the result of message is " Cannot locate tool_railengine30k.txt"
2) i tried to run "TM_advclawful780", the result is "No Configuration file found" ,but i saw my character Name over the Window.

i had been go through the forum & this subject of message & forward link by 3 hrs including testing again & again.
what's the problems over there ?? any missings or my misunderstanding for the procedures to run it?? pls advise..

thanks for yr assistance & co-operation .

i had been saved the file  shown as:
a) tm_advclawfull780
b) SUOHWQuester 129
c) Complete_looting_interface 22
d) tool_railengine30k
e) hw_bowcraft
f) hw_trinket
g) BMItemEval





Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on November 25, 2014, 08:12:21 AM
Sounds like you don't have the *all* those files in the same directory where you have the EasyUO executable.  No sub-directory either.  Try getting the CLAw to load a saved file first and then work your way to the quester.  Just save a test file just to make sure you can load it because some people have issues with this because of the version of Windows they are running.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: ayretimr on November 26, 2014, 07:18:34 AM
Good Morning.. ;D

File for running on sequence shown as into EUO:
1) sampleclawsetup
2) tm_advclawfull780
3) complete_looting_interface22 (u might not run this script directly)
4) BMItemEval
5) tool_railengine30k
6) hw_trinket
7) hw_bowcraft
8) SUOHWQuester129

first of all ,thanks for yr prompt reply last day...

I am using window 7 & i saved 8 files together with EUO' execution file on same directory
for Point 1+2)-- I had been finished the loaded & saved the setup, that's why the result of Status: Setup Saved!
for Point 3) -- as above of outcome.
for Point 4+5+6+7) -- press "Start" into the EUO
for Point 5+6+7)-- when I "Start" the 8) ,the rails(6+7) had been indicated into 5).
for 8) -- when press "Start", the outcome is "No default configuration found for this character , i don't know wheather I hadn't make the "Setup" firstly or not. under this situtation , i tried to press " Save" ,the outcome is "are u sure u want to overwrite the currect setup". i relized that i need to press & finish the Setup first.
Once i finished the Setup , i tried to press "Start" to run it. it's not workable.. i don't know why....
i made the confusion after i tried to discover how to use this Quester v.1.29 by more than 20 times .. it was because i had been successful to run it as the character moves on to heartwood & found the quester , then run out heartwood & recall to home .however ,it hasn't accepted the quest fm quester. --- just repeat this procedure for 10 times.
i had finished the setup ,then press "Start", no effect finally.

regarding for above of message.pls inform
a) for the sequence to start the file , isn't okey?? if not. pls advise
b) for the location of the file with EUO, is't correct ??
c) i don't know how to run the SUOHWQuester129 exactly ,pls give me the procedure how to do it.

waiting yr hands to solve above of problems..

thanks for yr assistance & co-operation.











Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on November 26, 2014, 08:25:35 AM
You have LOTS of issues.  You'll just have to read through this thread and see how people have solved them.  Sorry, but I don't have alot of time to help you debug your setup.  I ran this just the other day for another player, so I know things work well still on OSI.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: ayretimr on December 06, 2014, 11:43:15 PM
Dearest TM, :P

   Good Morning.. i double checked all the messages & run the script sucessful eventually ..
   you are my genius to open this forum for man who can learn more & share their effort over there..
   thanks for yr generous helpful & assistance with us all the times..

Have a nice day.... ;)
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on December 07, 2014, 12:52:10 PM
I'm glad you figured it out.  Part of running this site is for people to share their experiences regarding the scripts and their usage.  Please let us know what you did to get things working so maybe someone else can learn from your experience.

Enjoy!
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: ayretimr on December 08, 2014, 03:38:06 PM
Dear TM, ;D

  regarding for problems, i never use the scripts which is combined by thress parts to control the whole task. that's why i don't know how to do it as before..i need to draw my attention to double check & analyze how to run the script constantly. finally, i got it..
    we need to pay attention to read all the pervious messages carefully,we may find out what the points as we omited..
     anyway, tks for yr attention & asssistance..




Title: Re: ScriptUO Heartwood Quester 1.21 with Advanced CLAw support
Post by: ZigZagZebra on January 17, 2015, 12:25:52 AM
I fixed my previous problem, Some reason me being right next to my secure container at my house it was some how messing it up for me it wouldn't gate back to heartwood i remarked it 1 step from the secure so it was still reachable and the script went smoothly I have one suggestion though... 


TM: If you could rail this script down to Ciala The Arborist.

There is a bug where if you get:

The quest down in heart wood:
Glassy Foe - Ryal
Dust to Dust -  Aniel
Circle of Life - Mielani

The people are listed beside the quest name: But If you receive these three quests then go to Ciala you will get the Arch Support quest every time, which would make this run much faster and there would be no scrolling through the quest. It would be done in 5 min instead of around 10 or so. Just my suggestion thats how my previous heartwood script works.

This works great, assuming you modify the SUOquester to accommodate the hw_trinket2 rail and modify vendor to only target Ciala. I'm getting saws at hyperspeed now!

Also on my fletcher, its not as pristine a scenario but you can cut the amount of available quests for the bowcrafter by accepting the quest stop harping on me (and not completing) from either:

Sleen the Trinket Weaver
Unoelil the Bark Weaver
Waelian the Trinket Weaver
or Anolly the Bark Weaver

Then accept one of the other quests from Jusae of Cillitha and hardwire the quester to go to the other.

This narrows the amount of possible fletching quests from 6 to 4.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: The Ghost on January 24, 2015, 05:38:06 PM
Been Running this with 60k of boards and the only slayer I had got is an ICE Slayer.  Got plenty of the other drop. Did the drop rate have chance.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: ZigZagZebra on January 26, 2015, 11:49:47 AM
I run this almost endlessly when I'm not actually playing UO. And the slayers do seem pretty few and far between. I have no reference to what it was, but I can say I've only gotten 2 vermin slayers, 1 ice slayer and 1 flame slayer taly running this for WeEkS!!
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: The Ghost on January 26, 2015, 03:56:20 PM
Thx ZigZag.   I use to pull lot of slayer last years and now none.  Was wondering.     I got a few 30% exce and bonus  what I never seen before.  WOnder if each shard have a random drop.     Or Maybe the drop is split with the other ppl doing the quest.  :)
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Guinness on January 26, 2015, 05:10:54 PM
Has anyone figured out how to fix the issue regarding the error  tool_railengine30k.txt not found and no default config for char? Cant find a fix in the threads. This is not a message for TM as i know he is tired of these and he has better things to do on here like run a website :)
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: The Ghost on January 26, 2015, 06:42:59 PM
I had seen this error if you are not at the right location.    Can you tell us when and where this error appear.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Guinness on January 27, 2015, 01:05:48 AM
I had seen this error if you are not at the right location.    Can you tell us when and where this error appear.

the claw starts up great, but that error appears right when i start up the quester script. like as soon as i start it up. I get the menu but it stops the play from the error
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: ZigZagZebra on January 27, 2015, 10:53:00 AM
Has anyone figured out how to fix the issue regarding the error  tool_railengine30k.txt not found and no default config for char? Cant find a fix in the threads. This is not a message for TM as i know he is tired of these and he has better things to do on here like run a website :)

I know you mentioned you had ran this before with no issues, but are you using a different UO character, CPU or have you changed your EUO directories at all since then?

You should be able to correct the no default config for char error by going through the setup routine and saving.This just means the persistent variables are not found in your registry.

Two stupid questions coming here, just a heads up:

But have you actually downloaded the tool_railengine30k.txt separately? 
It can be found as an attachment at the thread http://www.scriptuo.com/index.php/index.php?topic=16.0 (http://www.scriptuo.com/index.php/index.php?topic=16.0)

And if you have, have you made sure its in the directory you have your EUO.exe?

Typically I run into 'rail error occured' with this script and a separate hw_trinket blah blah is out of range. That can happen if there is a lag spike and the recall to the heartwood portal didn't happen. This doesn't sound like what's happening to you.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: ZigZagZebra on February 08, 2015, 05:10:04 PM
A couple of things I've noticed which derail the script are when the quest gumps (accepting and turning in) somehow stray off-screen. I've played around with some fixes and a subroutine I added which I call after every call to gumpandsizewait where the generic gump corresponds to a quest gump.

Code: [Select]
sub PositionGump
 if #CONTSIZE = 262_324
    click #Contposx #contposy r
 if #CONTSIZE = 507_496
 {
  contpos 243 31
 }
 return
 


Just figured I'd share it in case anyone is having a similiar issue. You can play with the coordinates where the contpos event places the gump if its different for your monitor, just be sure its uncovered with backpacks, etc. so that the ocr can do its job!

Now I'm just thinking of how to fix two more issues:

recalling to heartwood fails and rail error is encountered - my thought is to attempt recall again, scan for journal something_is_blocking and attempt to go to fel heartwood location set at another runebook location. I used to use the fel location consistently, but the new VvV blocks recalling into Yew when it is active.

turn-in gets stuck because not all of the stools/bows are selected - I think this must be due to a lag spike where the item isn't selected and the mark subroutine succeeds at the ignoreitem event, thereby effectively iterating through all quest items but not selecting some of them. One way I can think to do this is set a timeout during the finish quest loop where it closes the gump which reads "I will be in debt if you bring me ..." I've found manually doing this will throw it through the mark routine again and complete the quest.

Stay tuned!

Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: coxalex on February 21, 2015, 07:06:24 PM
***MIGHT OF WRITTEN IN WRONG POST FOR MADE A COPY HERE IF IT WAS THE CORRECT ONE TO POST****

Hello Guys,  Wink   (AT THE DISCRETION OF SITE ADMIN TO BE DELETED/EDITED IF THOUGHT NEEDED, Although please let me know)

I have been looking at this quest now for weeks maybe even a few months. I know I am rather new to the community, And have made my introduction in the desired page and hope some have had a good laugh, But I dont know if I have still qualified to get a reply and help setting this script up properly.
I think I have all the necessary files but I seem to be getting confused on what order I should be running them, if there is an order to run them.....
Most scripts that I have tried have been rather straightforward newbie ones and easy to set up, but this one seems to be a fighter and doesnt want to give in to me. I know a tiny little bit about scripts but this one is just winning me, unless I am doing something absolutely stupid and not noticing it.
I know this is one of the most valued and cared after scripts in all the community, so I am not asking for a full detailed explanation here unless its allowed to by the admins ( Dont want to get anyone in trouble), as I know that this post is valued and not for everyone straight away to see to avoid getting it abused by wrong people, But could someone please I beg Tongue, in your time, please write a ''small up-to-date guide'' or ''guideline protocols'' to follow to make the script work and maybe send me it via Private message or write on forum if deemed correct by the admins.
I don't want to go into full detail about it in case I say something I am not supposed to, but the recall runes 1,2,3 are set up as they should be named, the secure container at the house I am guessing has to have just the fletcher tools/wood inside needed. I do have bonded betle but I am guessing a rail/setup config for it will have to be set up that I havnt got round to it yet. Just want the basics first then we can work on adding more knowledge and more info to make the system run smoother.


These is the list of files I currently: (Please advise if I am missing a file.... just hope not so, tried to thoroughly read all the pages without getting confused)

hw_bowcraft
hw_trinket
sampleclawsetup
SUOHWQuester129
tm_advclawfull780 (I think this is the latest version?)
tool_railengine30k
AND All these files are in the same directory as my EASYUO and OpenEUO executables


Thanks for you time for reading this post message and please keep the great work up.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: onlyindreams on February 22, 2015, 05:57:37 PM
***MIGHT OF WRITTEN IN WRONG POST FOR MADE A COPY HERE IF IT WAS THE CORRECT ONE TO POST****

Hello Guys,  Wink   (AT THE DISCRETION OF SITE ADMIN TO BE DELETED/EDITED IF THOUGHT NEEDED, Although please let me know)

I have been looking at this quest now for weeks maybe even a few months. I know I am rather new to the community, And have made my introduction in the desired page and hope some have had a good laugh, But I dont know if I have still qualified to get a reply and help setting this script up properly.
I think I have all the necessary files but I seem to be getting confused on what order I should be running them, if there is an order to run them.....
Most scripts that I have tried have been rather straightforward newbie ones and easy to set up, but this one seems to be a fighter and doesnt want to give in to me. I know a tiny little bit about scripts but this one is just winning me, unless I am doing something absolutely stupid and not noticing it.
I know this is one of the most valued and cared after scripts in all the community, so I am not asking for a full detailed explanation here unless its allowed to by the admins ( Dont want to get anyone in trouble), as I know that this post is valued and not for everyone straight away to see to avoid getting it abused by wrong people, But could someone please I beg Tongue, in your time, please write a ''small up-to-date guide'' or ''guideline protocols'' to follow to make the script work and maybe send me it via Private message or write on forum if deemed correct by the admins.
I don't want to go into full detail about it in case I say something I am not supposed to, but the recall runes 1,2,3 are set up as they should be named, the secure container at the house I am guessing has to have just the fletcher tools/wood inside needed. I do have bonded betle but I am guessing a rail/setup config for it will have to be set up that I havnt got round to it yet. Just want the basics first then we can work on adding more knowledge and more info to make the system run smoother.


These is the list of files I currently: (Please advise if I am missing a file.... just hope not so, tried to thoroughly read all the pages without getting confused)

hw_bowcraft
hw_trinket
sampleclawsetup
SUOHWQuester129
tm_advclawfull780 (I think this is the latest version?)
tool_railengine30k
AND All these files are in the same directory as my EASYUO and OpenEUO executables


Thanks for you time for reading this post message and please keep the great work up.

Just open and run SUOHWQuester129. Keep all the other files as you have them; in same folder as EUO. You can delete the sampleclawsetup if you want. It's just an example that's not required to run the script.

After starting the script, enter the applicable info. After that follow any prompts and then don't touch it after it's going.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Crisis on April 02, 2015, 06:40:06 AM
Wow, feel like a real moron but I am stumped. I have run this in the past many times with no issues but now I have one and I think it is the dreaded......wait for it.....wait for it......windows 8 issue.

Since switching over to win8 last year I have had no issues running scripts before now. I open the claw and load the sample script with what to keep (I know I don't need to use that as I can make my own list up but it is a good list and I am being lazy here.) I then start the HWQuester and run the guided setup which worked great. Now is when the problems start, if I click save, nothing happens and then the pointer goes up to the top left corner and every time I move it, it goes back. I closed out and ran it all again and hit start but the same thing happened. I was already running EUO and UO as admin so I took advice and tried changing it to run as compatible with win7 and same issue, winXP SP3, same issue and CLAW would get an error trying to load saved loot setup. So now I am stumped.

I have found a work around however!!

Common sense (yeah I know, I probably don't have any and just got lucky) told me that the issue seems to be with saving or running the set up. I remove the run as compatible since I had no issues before and start looking through the script. I am looking for the saved id's which I found here:
Code: [Select]
sub LoadSetup
  gosub TM_GetPersistantVariable CONFIGURED
  if #RESULT <> #TRUE
  {
    display ok No default configuration found for this character.
    return #FALSE
  }

  gosub TM_GetPersistantVariable quest_type
  menu combo select EUOComboBoxQuest #RESULT
  if #RESULT = 1
    set %quest_type FLETCHING
  if #RESULT = 2
    set %quest_type CARPENTRY
         
  gosub TM_GetPersistantVariable secure
  set %secure #RESULT
  gosub TM_GetPersistantVariable lootstorebag
  set %lootstorebag #RESULT
  gosub TM_GetPersistantVariable lootstorebag_bank
  set %lootstorebag_bank #RESULT
  gosub TM_GetPersistantVariable lootbag
  set %lootbag #RESULT
  gosub TM_GetPersistantVariable runebook
  set %runebook #RESULT
  gosub TM_GetPersistantVariable beetle
  set %beetle #RESULT
  gosub TM_GetPersistantVariable beetlepack
  set %beetlepack #RESULT

So I replace #RESULT with the id number and BOOM, it runs great!!  I hope this helps anyone else with win8 who is having issues running this script of pure awesomeness!
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: gimlet on April 02, 2015, 06:47:45 AM
Nice workaround Crisis!

+1
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: The Ghost on April 03, 2015, 04:08:51 AM
Nice one,  Let all wait for Win10 now :)
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on April 03, 2015, 09:03:44 AM
Nice one,  Let all wait for Win10 now :)


My guess is that scripts like this will just make Win10 drool while it tries to sit and eat cheereos.  Thankfully Win10 will come with a bib with clowns on it to mitigate the mess.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: kdzhii on May 13, 2015, 12:37:19 AM
cool script!
only i`m running in an error when i run out of fletcher tools. Says No more tinker tools in beetle backpack and no ingots to make more, altough i have 2 in backpack and it doesn`t take ingots with me when doing the secure bag all thing ..
can help anyone ?
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Crisis on May 13, 2015, 03:04:10 AM
Freeshard? Make sure that the %tinkertools id in game matches the one set on the script

Here are the id's from the script
Code: [Select]
set %tinktools GTL_JTL_
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on May 13, 2015, 09:00:45 AM
Be sure to put a bunch of ingots in your main pack as well.  I take like 500 with me.  That lasts for hours!
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: The Ghost on May 31, 2015, 05:26:58 AM
Does someone try to change/mod so it use the quest option items.   That could save some step. 
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on May 31, 2015, 09:39:48 AM
Does someone try to change/mod so it use the quest option items.   That could save some step. 

Very easy addition.  I have that in the 2.0 quester.  ;)
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: The Ghost on May 31, 2015, 01:58:45 PM
So here my stupid question.    Would it be possible to get a copy or it private.  Thx
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: valen on October 01, 2015, 11:41:33 PM
It seems i cannot get this script to run right. i have plenty of everything in bank. but when i try to run it it never takes the boards out of the bank and puts them in the beetle or tries to start a quest. am i missing something? ive looked at the script while its at that point and to my eyes it seems right.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Crisis on October 03, 2015, 03:59:53 AM
Freeshard or OSI? That could make a difference and if you are using Win8, check a few posts up. I was having some issues and had to enter some things manually into the script instead of the setup.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on October 03, 2015, 10:13:02 AM
Sounds like the beetle is not set up correctly.  Follow the beetle setup VERY CAREFULLY.  Also, as Crisis mentioned about shards, this really only works on OSI.  You are on your own on freeshards.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: valen on October 03, 2015, 12:22:50 PM
I am on osi and my laptop just got to windows 10. The beetle set up may have to be done manually?
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on October 03, 2015, 01:04:49 PM
I am on osi and my laptop just got to windows 10. The beetle set up may have to be done manually?

Be sure to follow this post VERY CAREFULLY:

http://www.scriptuo.com/index.php?topic=374.msg48553#msg48553
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: valen on October 04, 2015, 12:27:25 PM
I have not been able to to try the fix as of yet. Been working 16 hour days

Post Merge: October 05, 2015, 09:36:26 AM
The fix worked. Thank you!
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: meianoma on October 07, 2015, 02:13:00 AM
thx for this job!!!!
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Nomad101 on April 16, 2016, 01:40:04 PM
sounds interesting will have to try this  ;D
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: valen2.0 on August 28, 2016, 09:41:50 AM
TM. Would there be a way to input a randomize function to choose from different rail files?
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on August 28, 2016, 10:43:53 AM
TM. Would there be a way to input a randomize function to choose from different rail files?

That's a function built-in to the 2.0 quester, so yes there's a way.  :)  The 2.0 quester just isn't public.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: valen2.0 on August 28, 2016, 12:32:21 PM
Do you expect to release it? Or would you assist me in making it so I could use it?
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: wx1x on September 30, 2016, 10:13:22 AM
thanks man that's a great script indeed but where I can find the Kalocr.txt to downloand?
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Crisis on September 30, 2016, 02:03:45 PM
thanks man that's a great script indeed but where I can find the Kalocr.txt to downloand?

http://www.easyuo.com/forum/viewtopic.php?f=3&t=3891&start=0

It is considered abandoned but will still work for a lot of things.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: teamkim on November 10, 2016, 05:53:08 AM
thanks for this script. it's very well  :)
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: BobOzarius on November 10, 2016, 05:01:56 PM
I can see why you guys have fun with this!  hah
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Hawkler on May 18, 2017, 09:53:33 PM
TrailMyx this is a great script, it really pushed me out of my comfort zone with multiple scripts running and having to actually read the manual  very well done.   I hope some day to elite status as i would love to see v2.  I tried both the carpentry and bowcraft and both worked very well as of May 2017.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on May 18, 2017, 09:56:07 PM
TrailMyx this is a great script, it really pushed me out of my comfort zone with multiple scripts running and having to actually read the manual  very well done.   I hope some day to elite status as i would love to see v2.  I tried both the carpentry and bowcraft and both worked very well as of May 2017.

It's funny this script still works and is used even today.  Many have adapted it to work on freeshards as well. I'm glad people still find it useful.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Alex229 on June 03, 2017, 01:04:55 AM
okay so I got it all setup and going but all its doing is moving my tinker tools around my bag without doing anything else I don't know what else to do
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Crisis on June 03, 2017, 08:24:22 AM
You will need to help us with more information. Are you playing an official shard or a free shard? Did you set up the beetle properly? Did you make any changes? Did you run the set-up?
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Alex229 on June 03, 2017, 09:49:04 AM
im on demise the freeshard and yes the beetle was setup right the only thing I changed was the tinking id KTL

gosub CheckAndCraftItems %tinktools %tinktools KTL 2 1 %maxtinkertools cat_4-sel_4 ; make tinker tools, iron
    set !res #RESULT
    if !res = RES_LOW
    {
      gosub load_resource ENK !source #BACKPACKID 5 0   ; grab 5 ingots from beetle
      if #RESULT = #FALSE
        goto toolcheck_loop1
      finditem %tinktools C_ , #BACKPACKID  ; even one left?
      if #FINDKIND = -1
      {
        display OK No more tinker tools in beetle backpack$ and no ingots to make more  set %tinktools GTL_JTL_KTL

Post Merge: June 03, 2017, 10:18:02 AM
I got everything setup and it loads up the beetle and I got tinkering tools and ingots on me but once everything is loaded up all it does is move the tinkering tools around in my bag. Sorry for posting so much.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on June 03, 2017, 11:32:26 AM
You're going to have many problems getting this going on a freeshard.  This was written to support OSI officially.  With freeshards, you're kinda on your own. (see point 1 on the first post)

Tinkers tools is the least of your problems.. :)

Your next problems will be in this order:

1) finding the entry to Heartwood
2) Quest selection
3) etc.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Alex229 on June 03, 2017, 05:30:02 PM
alright im still new to this so I was wondering if there was a solution to that problem and I would go from there, but I guess ill figure it out so how and just get it going on my own
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on June 03, 2017, 06:04:50 PM
alright im still new to this so I was wondering if there was a solution to that problem and I would go from there, but I guess ill figure it out so how and just get it going on my own

Sadly, because most freeshards are different from one another, it's really hard to localize each individual problems.  It's easier on OSI because normally its just a setup issue, but since the dynamics and specific rules are different for freeshards, it's kinda impossible.  However, people have gotten this to work on various freeshards, and that information is spread out through this thread.  It's alot of info, but perhaps your specific problems have already been addressed.  If not, then this is a great time to learn how to debug.  Sprinking "pause" commands throughout the script and learning how to single-step through the code while looking at watch-points (variable values) can be very illuminating on why a script is misbehaving. 

Feel free to ask questions about the script dynamics and we'll help where we can.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: kakepare on November 08, 2017, 08:02:05 PM
this worked really well! i'm a complete noob at scripting so i couldnt figure out how to make it keep all the recipes and talismans but i got around that by pausing the script and grabbing what i wanted before letting it continue. i also couldnt figure out how to get it to do the weaver or carpentry quests instead of fletching, but the description did say that it only does fletching so i left it alone in case i broke something.
thank you so much for this! i'll surely get my rare bow recipes soon :D
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Guinness on June 21, 2018, 09:40:57 AM
And I still use this script :)

You did a fking amazing job with this script TM! Have used it for years :)

I want to try and get it to do some of the other quests for like scrappers and other nice recipe's they came out with recently. But do not hold a torch to you and am afraid I'll f something up lol

But this script is amazing and I use it daily :)

Thank you, bro, for all you do. Some of us are just not mean to make scripts, but sure love using them.

I have health issues that keep me from being able to click all the time, and these keep me enjoying the game I've loved for over 20 years :)

Again, thank you, brother, and to all that make the scripts on here.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: cybercasper on August 27, 2018, 05:43:24 PM
First time using this script. it does everything up to going into heartwood. it says it can not find VQV_Portal. I tried searching the script but can not find anything with that name. Anyone have any idea what is going on. I am using the railengine30k.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: hasman on February 26, 2019, 07:36:41 PM
It's pretty good.I like UO so long time. But it's so tierd to repeat the same "CLICK". So useful this script. Thanks All.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Crisis on February 27, 2019, 04:00:48 PM
It's pretty good.I like UO so long time. But it's so tierd to repeat the same "CLICK". So useful this script. Thanks All.

Bah, just go post a good introduction and you won't have to post nonsense hoping to be able to download things.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: lmackin on February 07, 2020, 03:25:57 PM
OK this script is great and I used one of the first versions many years ago and i'm restarting it.  I fixed a few issues I had when I first started it up, but still having issues with my character running too fast when it falls into heartwood even though my "always run" is unchecked.  Any ideas how to fix this?
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Toymaker on April 03, 2020, 12:16:14 PM
I loaded this up today and it works great. Kudos to the scripter god.  I do however have an issue that I'm not sure how to fix yet.. I have a box with my stash on the step of my keep and when the cycle in heartwood ends, it recalls me home, however the chest does not reload on my screen so the script doesn't locate my supplies. moving forward 1 step forward would reload the contents of my keep and then it would continue.  Any ideas? just need to walk 1 tile forward onto the steps, but no idea where in the script to put a Move..
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Crisis on April 03, 2020, 02:36:22 PM
I would look at possibly putting it at the beginning of the sub that unloads. I am not looking at the script, just thinking out loud. That's where I would start anyways.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Gaderian on April 03, 2020, 10:14:48 PM
No idea if I have ever modified this script before, but it would be near line number range 236-248 (assuming I did not ever change anything prior).

Specifically in the Main: loop the add for moving onto your house steps would be inserted here:
Code: easyuo
  1. gosub hiding 60
  2. menu get EUOCheckUseBank
  3. if #MENURES = #FALSE
  4. {
  5. ; Move into the house statement gets added as this line
  6.   gosub open_source %lootbag -1
  7.   finditem * C_ , %lootbag
  8.   if #FINDCNT > 0
  9.   {
  10.  
  11.     for #FINDINDEX 1 #FINDCNT
  12.       gosub DragItem #FINDID #FINDSTACK C %lootstorebag
  13.   }
  14. }
  15.  

Gaderian
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: The Ghost on April 04, 2020, 09:58:33 AM
This iis not a script issue.

 It is how the game is design.   The house items are only loaded when you enter your house.    Instead of using a box in your house, why not use a mail box, those are always available when the house items are not loaded..

It just a matter of where you lock down your secure.   Anything on the step is visible.

Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Danimal2020 on April 28, 2020, 05:15:37 AM
Script runs to a point and stops. I am able to set it up, and my character makes his way to heartwood and dismounts beetle. Then he just keeps opening and closing the paperdoll for the quest giver. Anyone else run into this? I have read through all the steps several times and cant figure out what I am missing. Possible the resolution im running at or something?

EDIT>> Found it. (The rail engine link does not work. Anyone know where to find that?)

Script works, working out a couple of user errors right now. People still use this baby?
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: The Ghost on May 02, 2020, 05:39:40 PM
The solution to your problem is right here.  http://www.scriptuo.com/index.php?topic=15545.msg121887#msg121887

The quest window doesn't stay on top anymore once you double click the NPC,   EN'  posted his gump stay on top.

This will take some setup on your part and to modified the accept quest part.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Xenomorphe on May 06, 2020, 10:10:20 AM
This iis not a script issue.

 It is how the game is design.   The house items are only loaded when you enter your house.    Instead of using a box in your house, why not use a mail box, those are always available when the house items are not loaded..

It just a matter of where you lock down your secure.   Anything on the step is visible.

I loaded this up today and it works great. Kudos to the scripter god.  I do however have an issue that I'm not sure how to fix yet.. I have a box with my stash on the step of my keep and when the cycle in heartwood ends, it recalls me home, however the chest does not reload on my screen so the script doesn't locate my supplies. moving forward 1 step forward would reload the contents of my keep and then it would continue.  Any ideas? just need to walk 1 tile forward onto the steps, but no idea where in the script to put a Move..

The solution to this is to go into options/eyeball/Display all public house contents.

If you do that it will show up every time.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: The Ghost on May 06, 2020, 11:25:34 AM
Can you post a pic of your setup.   

Maybe the script don't see the house refresh.   If I recall correctly,  the chest need to be on the South or east side of the house. 
Do you use the skill hiding.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Xenomorphe on May 06, 2020, 11:36:49 AM
I just have a standard keep with the secure on the steps on the south side.  When I was using something for LJ i realized it wouldn't appear every time I recalled back.

After I turned on the show all public house contents it worked like a champ for me.  It could have something to do with the stairs on the keep being inside the overall footprint of the house and I haven't tried with any other building design.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: The Ghost on May 06, 2020, 12:02:21 PM
Try to use a mail box.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: CityKitty on August 27, 2020, 03:03:10 PM
Is this script no longer supported? I get a 404 for the rail file link and the claw link and I don't see any alternate download location.

Any help appreciated. Thanks!
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Crisis on August 27, 2020, 03:42:46 PM
ScriptUO no longer has SMF in the addresses. If you remove it, the links work just fine.

Rail - http://www.scriptuo.com/index.php?action=dlattach;topic=16.0;attach=6
Claw - http://www.scriptuo.com/index.php?topic=17.0

TM doesn't play much anymore but can still answer a lot of questions when he is on.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: CityKitty on August 27, 2020, 04:46:43 PM
Ahh thank you so much. I have all the crafters and I have days and days where all I do is Hearwood. This script sounds like it can help make it less painful.

Thanks for the quick response!
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on August 27, 2020, 08:46:41 PM
I fixed those links in that thread.  Hadn't edited that post since 2011.  lol.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Crisis on August 28, 2020, 02:35:16 AM
Thanks TM!
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on August 28, 2020, 09:08:45 AM
Thanks TM!

Thanks for noting that.  The last time we needed that "SMF" directory is back when we were back here:
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Crisis on August 28, 2020, 06:34:40 PM
Good times! It is hard to believe that I have been here for 10 years. Though the first 2 were more lurking lol.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: jenovauh on November 16, 2020, 01:33:06 AM
Nevermind,  i manage to get the number already. :)
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Nuscheltier on November 29, 2020, 10:01:53 AM
Hi,

I love the script and it works quite neathly. The only issue is - that if I want to use Claw to evaluate the loot - the script does not move on after the first reward bag was obtained. Somehow claw seems to refuse to evaluate it. Do I have to set auto loot or anything else?
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on November 30, 2020, 11:06:28 AM
Hi,

I love the script and it works quite neathly. The only issue is - that if I want to use Claw to evaluate the loot - the script does not move on after the first reward bag was obtained. Somehow claw seems to refuse to evaluate it. Do I have to set auto loot or anything else?

Without the ability to run on OSI shards any longer, it's up to you to diagnose what's going on and where in the code it's getting stuck.  Not sure how many people still use this, so it would be helpful if there's anyone out there that still use this successfully and perhaps can lend a pointer or 2.

If you can locate in the code where you think the script is going wonky, I can recommend possible solutions.

Probably the first thing you should make sure of is uncheck the "automatic corpse looting" feature.  And also make sure you have a loot bag set in your backpack.  Finally, for testing, make sure you are not looting using both BMEval and the CLAw - just choose the CLAw.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Nuscheltier on November 30, 2020, 11:17:08 PM
Hi TrailMyx,

First I do appreciate that you still answer and I do understand that you are not playing uo anymore (actually why? I just returned and the game is so much fun :D) and therefore surely have better things to do.

The heartwood quester stops at line 1108 (gosub TM_LootInProgress). TMClaw does not seem to start as it still stands at line 1.
It is however initialized and marked as running, also the quester seems to recognize it when it starts up.
I have set the loot bag, nothing is checked (autoloot etc) and only claw is checked in the quester menue.

Thanks anyways, still, its a pleasure to use this script!
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on December 01, 2020, 08:19:07 AM
Are you running your EasyUO instance with administrator rights?  That's the kind of problem that everyone would be seeing.  Vewy odd.

Edit:
Just out of giggles, I stripped out the looting portion of the quester just so I could run on a container I have in my castle on Lexia.  Works fine for me.  One thing though that the quester should be doing is the bag must be opened before the looter can be run.  But in the status you should get something like "X items evaluated, X items looted" or something like that.  If the bag you are looking into isn't open, then the number of items evaluated will be 0.

So my setup is:
1) RunUO
2) No program like UOA, Razor or UOSteam running
3) running EasyUO with admin rights.
4) CLAw and test_quester running in the same instance or EUO, but in different tabs.

With this setup, this script runs fine and loots as expected (assuming the bag/container is open)  The quester automatically opens the bag though.  You should make sure that for your testing, you make sure that you aren't running BMEval; not sure if that part of the script ignores IDs or not.  My test shows the TM_LootInProgress sub works only as long as the script is evaluating and draging found items.

So I'm unsure what your problem is - I cannot replicate your issue.  I wish you luck trying to debug it.
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Thargorff on December 27, 2020, 02:55:15 PM
thank you for sharing this wonderful script, being running it all day, working like a champ
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on December 28, 2020, 09:08:15 AM
thank you for sharing this wonderful script, being running it all day, working like a champ

The rare "Thanks" sans "But".  lol.  Awesome end to 2020!  Glad it works for ya!
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Thargorff on December 28, 2020, 10:01:37 AM
I actually had hard time to let it go and stop for the night, was running so good, getting addicted to all these scripts, barely have time to play actual game hands on
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on December 28, 2020, 01:11:39 PM
I actually had hard time to let it go and stop for the night, was running so good, getting addicted to all these scripts, barely have time to play actual game hands on

I remember the days when everyone "discovered" this script.  It was much different than what Sorrowmaster originally introduced and also ran 1000% better, but it was hilarious to see SO MANY people running the exact script.  Wandering around Heartwood on any shard and seeing everyone with beetles standing on the exact same spot and railing in/out of heartwood exactly the same.  No wonder so many people got flagged for scripting and banned. 

Do you see many people using it anymore?  I remember easily seeing 10-20 people per shard at a time. 
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Thargorff on December 29, 2020, 10:32:52 AM
Ran it all day saturday and sunday, havent seen a single soul in heartwood. I did get my rare recipies and bunch of nice looking tallies. Of course i dont plat atlantic, that place could prob get you in trouble
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: kvothe68 on January 17, 2021, 10:01:42 AM
Hello,

the script runs fine... i like it very much...

with one exception...

my bettle is always fatigued cause my char iss not dismounting the beetle. Does someone know what the problem is?

thanks in advance!

Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on January 17, 2021, 11:07:29 AM
Sounds almost like you need to run through the guided setup again.  Did your beetle die at some point and you have a new one?
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: Gaderian on January 17, 2021, 04:08:39 PM
EJ F2P accounts are not allowed to ride a beetle if it has anything in the beetle's pack. Could that be the issue?
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: formerlyrara on January 18, 2021, 11:43:35 AM
Hi TrailMyx,

First I do appreciate that you still answer and I do understand that you are not playing uo anymore (actually why? I just returned and the game is so much fun :D) and therefore surely have better things to do.

The heartwood quester stops at line 1108 (gosub TM_LootInProgress). TMClaw does not seem to start as it still stands at line 1.
It is however initialized and marked as running, also the quester seems to recognize it when it starts up.
I have set the loot bag, nothing is checked (autoloot etc) and only claw is checked in the quester menue.

Thanks anyways, still, its a pleasure to use this script!


Wanted to answer this for you as i am currently running this for 2 days no issues. Set up your claw.. make sure that you DO NOT have anything checked on the bottom.. IE loot ground items etc.. set up your rules how you want them.. start claw, then the heartwood.. make sure you have 1 bag on you and 1 on bug. works perfectly..  make sure the menu is set up in quest for just claw only. Let me know if you have issues...
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: kvothe68 on January 19, 2021, 03:20:55 AM
Hello,

the script runs fine... i like it very much...

with one exception...

my bettle is always fatigued cause my char iss not dismounting the beetle. Does someone know what the problem is?

thanks in advance!

Hello,

i think, i have found the issue.

I have changed the game play window size to 1024x768.

Now my bug walks and don´t get fatiqued.

Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on January 19, 2021, 10:51:44 AM
Hello,

i think, i have found the issue.

I have changed the game play window size to 1024x768.

Now my bug walks and don´t get fatiqued.

Hmm, I guess I see how that could cause your problem.  I suppose another fix if you don't want to change your gameplay window is change the click locations in the rail engine to be more compatible with your window position/size.  Good work figuring it out anyhow!
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: TrailMyx on August 02, 2021, 08:07:19 PM
Just for giggles, here's the complete list of OCR values for all quests in heartwood.  Now you can have the same functionality as the Elite quester! ** some additional code required
Code: easyuo
  1. set %QUEST_Gibber_Jabber 6770676
  2. set %QUEST_Voracious_Plants 7202604
  3. set %QUEST_Creepy_Crawlies 7407180
  4. set %QUEST_Animated_Monstrocity 10451496
  5. set %QUEST_Bloody_Nuisance 7418008
  6. set %QUEST_Molten_Reptiles 7461960
  7. set %QUEST_Birds_of_a_Feather 7682600
  8. set %QUEST_Frightmares 5449132
  9. set %QUEST_Blood_Suckers 6572284
  10. set %QUEST_Circle_of_Life 5762072
  11. set %QUEST_The_Afterlife 6547956
  12. set %QUEST_Mongbat_Menace 8301768
  13. set %QUEST_Three_Wishes 6389224
  14. set %QUEST_Stirring_the_Nest 8041364
  15. set %QUEST_Impish_Delights 7250712
  16. set %QUEST_Evil_Eye 2700
  17. set %QUEST_Forked_Tongue 6402644
  18. set %QUEST_Gargoyles_Wrath 8065212
  19. set %QUEST_Shaking_Things_Up 8019408
  20. set %QUEST_Arachnophobia 7249972
  21. set %QUEST_Cold_Hearted 6283204
  22. set %QUEST_Warrior_Caste 6146484
  23. set %QUEST_Specimines 4848608
  24. set %QUEST_A_Big_Job 4961096
  25. set %QUEST_Mini_Swamp_Thing 7952180
  26. set %QUEST_Friendly_Neightborhood_Spider_Killer 21115020
  27. set %QUEST_Undead_Mages 6735416
  28. set %QUEST_The_Ancient_World 9628140
  29. set %QUEST_Glassy_Foe 4220768
  30. set %QUEST_Daemonic_Prism 6816656
  31. set %QUEST_Hailstorm 4540152
  32. set %QUEST_How_Many_Heads 8356904
  33. set %QUEST_Stop_Harping_on_Me 9333884
  34. set %QUEST_The_Far_Eye 4704768
  35. set %QUEST_Nothing_Fancy 5583524
  36. set %QUEST_From_the_Gaultier_Collection 15496060
  37. set %QUEST_Tick_Tock 4096820
  38. set %QUEST_Arch_Support 5963096
  39. set %QUEST_Necessitys_Mother 8454880
  40. set %QUEST_Reptillian_Dentist 7715920
  41. set %QUEST_Beer_Goggles 6280380
  42. set %QUEST_The_Song_of_the_Wind 11163968
  43. set %QUEST_Message_in_a_Bottle 8402168
  44. set %QUEST_Trolling_for_Trolls 7539552
  45. set %QUEST_Orc_Slaying 5538672
  46. set %QUEST_Forked_Tongues 6449580
  47. set %QUEST_A_Tale_of_Tail 5930000
  48. set %QUEST_A_Feather_in_Yer_Cap 9288252
  49. set %QUEST_Unholy_Construct 7425348
  50. set %QUEST_Dead_Man_Walking 9611820
  51. set %QUEST_Roll_the_Bones 6418400
  52. set %QUEST_The_Perils_of_Farming 9873376
  53. set %QUEST_King_of_Bears 6128892
  54. set %QUEST_Industrious_as_an_Ant_Lion 11379828
  55. set %QUEST_A_Chill_in_the_Air 7935924
  56. set %QUEST_Its_a_Ghastly_Job 8660268
  57. set %QUEST_Death_to_the_Ninja 9105648
  58. set %QUEST_Ex_Assassins 5444672
  59. set %QUEST_Wild_Boar_Cull 7138160
  60. set %QUEST_Overpopulation 6736840
  61. set %QUEST_Crime_and_Punishment 10849620
  62. set %QUEST_Extinguishing_the_Flame 10717152
  63. set %QUEST_New_Leadership 7393004
  64. set %QUEST_Dust_to_Dust 5426064
  65. set %QUEST_The_King_of_Clothing 10323464
  66. set %QUEST_Haute_Couture 6323844
  67. set %QUEST_The_Puffy_Shirt 7762292
  68. set %QUEST_Scale_Armor 5505960
  69. set %QUEST_Cuts_Both_Ways 7109728
  70. set %QUEST_The_Bulwark 5860292
  71. set %QUEST_Dragon_Protection 8316588
  72. set %QUEST_Thinning_the_Herd 7948316
  73. set %QUEST_No_Good_Fish_Stealing 10438008
  74. set %QUEST_A_Hero_in_the_Making 11549416
  75. set %QUEST_Theyre_Breeding_Like_Rabbits 16255212
  76. set %QUEST_Filthy_Pests 5790920
  77. set %QUEST_Forced_Migration 8191900
  78. set %QUEST_A_Fine_Feast 4875384
  79. set %QUEST_Theyll_Eat_Anything 9468808
  80. set %QUEST_Unholy_Knights 7202864
  81. set %QUEST_A_Trog_and_His_Dog 8919248
  82. set %QUEST_Troglodytes 5700620
  83. set %QUEST_Friend_of_the_Fey 6739596
  84. set %QUEST_All_That_Glitters_is_Not_Good 14928680
  85. set %QUEST_Caustic_Combo 6810720
  86. set %QUEST_Paroxysmus_Moloch 10002088
  87. set %QUEST_Paroxysmus_Daemons 9895380
  88. set %QUEST_Plague_Lord 5172652
  89. set %QUEST_Paroxysmus_Succubi 9261772
  90. set %QUEST_Dreadhorn 4976932
  91. set %QUEST_Lethal_Darts 5362724
  92. set %QUEST_Ingenious_Archery_Part_I 10013928
  93. set %QUEST_Ingenious_Archery_Part_III 12210240
  94. set %QUEST_A_Simple_Bow 6415424
  95. set %QUEST_Ingenious_Archery_Part_II 11388140
  96. set %QUEST_Its_Elemental 6476500
  97.  
Title: Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
Post by: formerlyrara on August 25, 2021, 01:32:42 PM
TM just saying thanks again for this script, still works flawlessly. Havent played around with the tidbit you released recently for the elite side, but will get to it!