ScriptUO Heartwood Quester 1.29 with Advanced CLAw support

[Larppa]

I think my problem was caused by the fact that on my shard you don't spawn right on top of the gate but like 2-3 tiles away from it so in order to use only 1 rail for all the movement i had to mark a spot on both sides of the gate and then sometimes my character ran back into the gate causing it to get lost. Now what i did was to modify the script to support different rail for each way and now the script runs perfectly (or has ran for like 48 hours straight ;p)

Here's the rude method i used to hardcode my little rail into it. Uses a new rail i made with the railengine.

Spoiler: show

  ;===== Walking Rail into Heartwood =====
  set #LPC 1000
  call %railsubs TM_RunRail %label_bowcraft 0 END FW  ; beginning to end
  if #RESULT = #TRUE
  {
    display ok Rail error occurred.
  }
  set #LPC 10
 
return

;===== From Bowcrafter =====
sub frombowcrafter
 
  ;===== Walking Rail out of Heartwood =====
call %railsubs TM_LoadRail bc_to_yew.txt
wait 5s

  set %temp #RESULT - 1 ; get the size of the waypoint file.
  set #LPC 1000
  call %railsubs TM_RunRail hw_bowcraft_back 0 END FW  ; end to beginning
  if #RESULT = #TRUE
  {
    display ok Rail error occurred.
  }
  set #LPC 10 
  wait 2s
return

[Neftis_RJ]

What shard are you playing on?

Im playing Origin, greatlakes shard.

[TrailMyx]

Sounds like it's stuck trying to open your beetle pack.  Follow the instructions very carefully to make sure you initialize the beetle pack correctly.

BTW, here's the link to the beetle pack work around:
http://www.scriptuo.com/index.php?topic=374.msg48553#msg48553

[Neftis_RJ]

Sounds like it's stuck trying to open your beetle pack.  Follow the instructions very carefully to make sure you initialize the beetle pack correctly.

BTW, here's the link to the beetle pack work around:
http://www.scriptuo.com/index.php?topic=374.msg48553#msg48553

Alright, Ill try that. Thx
Post Merge: November 28, 2013, 12:00:34 PM

Sounds like it's stuck trying to open your beetle pack.  Follow the instructions very carefully to make sure you initialize the beetle pack correctly.

BTW, here's the link to the beetle pack work around:
http://www.scriptuo.com/index.php?topic=374.msg48553#msg48553

Alright, Ill try that. Thx

Thx! Its working fine! Just had to open bettle myself!

The script is awsome!

[Grandewd]

Love seeing you so active here, TM.... 
Always interested in code feedback and you're one of the best at that...

Just sayin....

[TrailMyx]

Love seeing you so active here, TM.... 
Always interested in code feedback and you're one of the best at that...

Just sayin....

Heh, thanks for that.  You'd expect I'd be uber-bored by now.  I guess this is a labor of love, or I just lead a pathetically dull life.  Probably a combination in there somewhere. 

[Oracle]

TM,

Script was working fine until somehow my Beetle died while doing the Quest inside Heartwood Felucca.  When I rezzed my Beetle I went thru the setup again just to make sure all of the ids were correct.  What happens now is that when I get to Heartwood, I will jump off my Beetle at the Bowcrafter, hide, then 10 seconds later mount my Beetle again and it goes all the way back home opens everything and starts over creating a vicious cycle.  What might be happening or am I missing anything?

[TrailMyx]

Sounds like your setup isn't correct still.  Go though it again.  Also you may want to double-check the values by hand for the beetle and the beetle pack.

[Oracle]

Thanks TM,

I went thru the set-up again and also checked the values by hand to see if they matched.  I also noticed that the Quest was already selected, so I quit the Quest before starting the Script and it worked perfectly...

[TrailMyx]

Thanks TM,

I went thru the set-up again and also checked the values by hand to see if they matched.  I also noticed that the Quest was already selected, so I quit the Quest before starting the Script and it worked perfectly...

Oh yeh, that quest thing will get ya!

[gubass]

hi guys I have 2 problems =[.
firstly imm on osi shards .
ivve been away from the game for a few years so plz excuse my ignorance/stupidity.
ivve read through every page and cannot find a fix for my ist prob witch is
ivve run setup multiple times the script for me when I start it trys to recal off the runebook to the default location evertime  and not to heartwood if I set default to heartwood it runs fine until it has to recal back so not switching rune locations a little hlp in this prob would plz a old man a lot hehe .
imm using windows 7 /64 bit intel machine set to 32 bit as far as I can see.
anyhow anny imput to my prob would be great=]
ps I used to use this script a lot and think its the beees knees =]

[TrailMyx]

The recall subs set the rune index to default and then recalls from that point.  You need to set the rune index in the UI to the one that corresponds to the location in your runebook.  1=first rune all the way to 16=last rune.

If this confuses you, go buy a new rune book and mark a rune to heartwood, the bank and an inn.  Put the heartwood rune in the book first, followed by the bank rune and finally the inn/safe rune.

[gubass]

hia ty for the very fast response. 
ivve just got new book and set the runes to match  the ui  so they match but it still only recalls to what the default rune is set to example being I put it to my heartwood rune then started script.
it done its stuff altho not got it picking up and placing boards in beetle yet then it recalled to heartwood ran to qhest noticed no boards so went out and recalled to heartwood and not my house rune even tho there set it doesn't seem to swap to needed runes .

[TrailMyx]

Sounds like you just need to keep playing with it until you figure it out.  You may have to single-step through the code to see what's happening and were it's going wrong for you.  Sorry for no real answers, but you get what you pay for. 

[gubass]

I will thanks for the help .
ivve spent 6 hrs or so on it it seems that after opening the book gump it s not klilking in the right x/y location to get to the runebook page up to klik default location.
Annyway ty for the super fast response and keep up the good work it really is apreiciated =]
Post Merge: December 29, 2013, 06:30:02 AMjust a heads up I found my problem
script working great not using claw loot yet but heck I have 1 of each runic so far .
This numb nutz downloaded the wrong easy uo lol. Aint it amazing how a hour or 2 away from ur issue u can think more clearly and check the obvious !