ScriptUO Heartwood Quester 1.29 with Advanced CLAw support

[Malcate]

It is running fine when I do the fletching one, but I keep getting rail errors right after gating to HW while trying to use the carpentry version.

[TrailMyx]

It is running fine when I do the fletching one, but I keep getting rail errors right after gating to HW while trying to use the carpentry version.

Works fine here.  What are you doing while it's railing?

[Malcate]

Nothing. Not touching mouse, running the 1.27 version, no UOA opened.

I open a gate to HW, and without moving I get a rail error once I pop through it.

[TrailMyx]

Unsure then.  There's not really much different between the two rails, especially how they start.  They end up in different places, but that's just different waypoints.  You might try re-downloading the rails or changing where you rune is marked.

[Cerveza]

Mark a different spot at the gate and try it again?

[TrailMyx]

I'm running 1.27 right now to the carpentry quest.  No issues.....  Why are you gating anyhow?

[onlyindreams]

I'm running 1.27 right now to the carpentry quest.  No issues.....  Why are you gating anyhow?

Isn't Siege gate only?

[gargamell]

Can't wait to try this out!

[jilber]

im having a problem,
script doesnt load my beetle. i  selected secure bag which has  boards in it. but when i start it doesnt loads the beetle and without having boards my crafter hits the road

i ve changed only exevent popup %beetle to exevent popup %beetle 11 so when targeting beetle script doesnt release the beetle, otherwise it does.

i see  a massege that container cannot hold more weight on the screen....

Prolly im doing something wrong in the setup but dunno what...
1 i selected a secure bag
2 i ve selected a another bag inside the secure bag
3 all materials are in main level of secure bag
4 i ve selected loot bag in my main bag
5 i ve selected the runebook
6 i ve selected the beetle ... what am i doing wrong

but as i ve seid boards havent been loaded by the script....

[Cerveza]

If it's trying to release the beetle, it sounds like the location may have changed on the beetle menu.

[jilber]

prolly something wrong with the beetle huh? script tries to load logs somewhere else maybe thats why i see container cannot hold more weight massege....

what do you think?

[Cerveza]

If it's trying to release the beetle then it's clicking the wrong thing on the beetle's context menu.

Try running it and using F7 to step through, you'll see the exact line that is trying to release your beetle. Get that info and post it up.

[jilber]

  finditem #charid G_20
  set #lobjectid #findid
  wait 5
  event macro 17 0
  wait 20
  display Target Your Beetle
  wait 1
  set #targcurs 1               *****
  target
  while #targcurs = 1           ******
    wait 0
  set %beetle #ltargetid       ******one of these lines cousing i think
  wait 5
  finditem VRD c_ , #backpackID
  if #findkind <> -1
  {
    gosub DragItem #FINDID 1 C %beetle
  }
  exevent popup %beetle
  gosub GumpWait normal_gump normal_gump
  click 50 180

[Cerveza]

Code: [Select]

  gosub GumpWait normal_gump normal_gump
  click 50 180
That's the click to open the beetles pack. It may be that it's clicking the wrong position and trying to release your beetle.

You can check it by keeping EasyUO visible on your screen with the x and y mouse coords visible (on the right side of EUO), then "hover" your mouse over the RELEASE on the beetle's context screen. See if it's something close to 50 180, then "hover" over the OPEN PACK and see what the difference is.

[TrailMyx]

Also remember this script isn't meant to work on a freeshard....