Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Elite331

Pages: [1] 2
1
Questing / Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
« on: April 16, 2009, 02:14:55 PM »
Ok i'll do my best...
And just to let you know the script runs absolutely fine now with that small change, so just to let anyknow who wants to use a bank secure line 230 needs to be
gosub DragItem #FINDID #FINDSTACK C %lootstorebag_bank

Works like a charm! lol ty vm TM apprecaited.

2
Questing / Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
« on: April 16, 2009, 02:09:25 PM »
Alright its still going! And I am so glad I could help lol! Makes me feel like im doing something to help actually!!
I will try that for sure once its done this round.... I know its a little off topic, but what do I have to do to fix the script to run to the Arbroist not the tinker...I  the files d/l'd just not sure how to make the script take the rail

3
Questing / Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
« on: April 16, 2009, 02:00:49 PM »
So im running it right now to see, Although im looking at the script and even though I have changed that line it is still registering my loot bag as N/A so im not to sure if its going to work but ill let it run and try it out and see how it goes, otherwise i guess ill have to change it manually.

4
Questing / Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
« on: April 16, 2009, 01:31:14 PM »
Hmm,

So I have found that it does actually say N/A what type of bag are you using, I have tried multiple im not sure why it wont be reading any of them? If i manually change the N/A to an Id would that work, or do i need to toy with it untill the setup actually takes a holds the item id of the bag... Tricky little thing these scripts

5
Questing / Re: Additional Heartwood rail to the Trinket weaver.
« on: April 16, 2009, 01:10:25 PM »
So I found where you have it, and I believe I changed the code, yet now its saying that the rail cannot be found, i have it like this ... I tried to just play with it from what I've seen....not sure why its not working

set %use_custom_rails #TRUE  ; change to true to load your own rails

if %use_custom_rails = #FALSE
{
  set %hw_trinket2 hw_trinket_2.txt  ; label = hw_trinket_2 index=0
  set %railtrinket hw_newtrinket.txt    ; label = hw_newtrinket  index=1
  set %label_bowcraft hw_bowcraft
  set %label_trinket_2 hw_trinket_2

6
Questing / Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
« on: April 16, 2009, 01:02:49 PM »
this is what i have ..
gosub open_source %lootbag -1
  finditem * C_ , %lootbag
  if #FINDCNT > 0
  {

    for #FINDINDEX 1 #FINDCNT
      gosub DragItem #FINDID #FINDSTACK C %lootstorebag
  }
}
else
{
  gosub LocateBank
  if #RESULT <> #TRUE
  {
    gosub open_source %lootbag -1
    finditem * C_ , %lootbag
    if #FINDCNT > 0
    {
      for #FINDINDEX 1 #FINDCNT
        gosub DragItem #FINDID #FINDSTACK C %lootstorebag

I cant lie not entirely sure...but im pretty sure that looks right? unless im totally missing something

7
Questing / Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
« on: April 16, 2009, 09:04:52 AM »
Hmm, See I thought the same things, sorry i'll try to be more detailed with my trail and error...

It is in the main level, Like I said I have also tried other main packs ,and Also thought just perhaps I missclicked on guided setup so i Have indeed tried to redo the setup multiple times, still no luck.? any ideas...

(oh and perhaps a link for arborist reading material)

8
Questing / Re: ScriptUO Heartwood Quester 1.22 with Advanced CLAw support
« on: April 16, 2009, 08:41:56 AM »
Loving the quest, Although Im having an Issue I cant seem to correct,
Once it loots the specific items its going to loot, once I get back to my bank box
It tries to drop it into my loot bag in my bank, but it just bounces right back into my loot pack?

Doesnt seem to matter what bag I use it just doesnt seem to work? any ideas?
Also small side note, Arborist do i need to replace the labels or add them? to have my
script rail down to that person?

9
Questing / Re: ScriptUO Heartwood Quester v1.16
« on: April 15, 2009, 09:09:50 PM »
I am very sorry! lol

I must say I did figure it out, I have to give an absolute GREAT thanks to Khameleon, who took the time to help me straighten out my 't  problems which really just seemed to be the fact I wasnt familiar enough! Although again I apprecaite the time he took to help me out I feel about 10000 times better about readin the scripts and setting them up.  The help you guys provide to enhance peoples game play is unbelieveable and amazing, also the script works beautifully!  tyvm!

10
Questing / Re: ScriptUO Heartwood Quester v1.16
« on: April 15, 2009, 05:06:33 PM »
Im sorry if this is a newbie question, but I cant for the life of me figure out how ?load? the rails into the rail engine? i jsut dont get what the menu is that pops up or how i get things loaded to start walking?
Post Merge: April 15, 2009, 06:05:55 PM
Does this need to be ran with Script Uo...or is it compatiable with EasyUo?

11
Questing / Re: Additional Heartwood rail to the Trinket weaver.
« on: April 15, 2009, 04:51:13 PM »
When you have the label like that, Where abouts does that go into the rail to have it run to that specific spot?
When my rail menu comes up I cant make any adjustments to it, to locate way points or anything.

12
New member introductions / Re: Elite's intro
« on: April 15, 2009, 04:36:24 PM »
Ok! I apprecaite that, maybe bit off a little more then i should be trying to chew!
So i d/l'd everything with the 1.16 version, everything seemed ok, except I dont know what I missed with the rail_engine because I cant for the life of me figure out how to set it? or what I need to imput?  I've read some threads but all I can see is people saying that they have the error of it not being found, i had that issue but worked through it, and now im just stuck at the moment where I cant figure out how to set the way points to work right... Any suggestions? or a link to read through, MY search doesnt seem to be working as well as hoped... But im looking trying not to get frustrated and give up lol! any help is great, Im also trying not to be the guy who just posted intro and is now asking for help... I'll do my best to have any helpful input as much as I can ty!
Post Merge: April 15, 2009, 04:44:17 PM
Also i am re reading rules and it would appear I already broke a couple Im very sorry, just getting frustrated and I kept seem to find any of the posts I just found an hour ago explaining the rails and scripts...sorry guys I know I PM'd my bad.... wont happen again

13
New member introductions / Re: Elite's intro
« on: April 15, 2009, 03:47:24 PM »
Im sorry guys!

Now I cant even seem to find my way back to the threads about the scripts.
These are the scripts I have loaded..
hw_bowcraft
hw_trinket
sampleclawsetup
SUOHWQuester122
RailEngine

Im not exactly sure what else I need or where the news one are.
If someone could possibly post a thread link to help me out or perhaps let me know what im doing wrong, I would be greatly apprecaited thank you.

14
New member introductions / Re: Elite's intro
« on: April 15, 2009, 03:38:32 PM »
I have read through a whole bunch of stuff and I already be seeming two problems it says that claw is not intialized and asks if i should contoune with BMeval? also it is saying it cannot locat tool_railengine30k ....I remember reading a thread about that just going to have to find it again....grrrrr....complicated lol!

15
New member introductions / Re: Elite's intro
« on: April 15, 2009, 03:26:52 PM »
Lol! thanks alot like I said I dont do this stuff lol!

So I believe I have everything d/l'd now and im going to attempt to run it, but damn it looks complicated I read everything, but could you possibly give me a step by step on how to use the heartwood quest?

Pages: [1] 2