ScriptUO

Official ScriptUO EasyUO Scripts => Script Debug => Topic started by: Citrus82 on July 30, 2014, 11:05:23 AM

Title: Gating Script
Post by: Citrus82 on July 30, 2014, 11:05:23 AM

A while ago i made a gating script, the purpose of the script is to constantly keep a moongate open to my vendor house. The script works as intended flawlessly, but sometimes it will move some of my things around like my backpack or my health bar. Sometimes i will find them off in the bottom corner or elsewhere on the screen, i think the part of the script that opens the runebook and opens a gate does it.

Can someone take a look at it and let me know if there is anything i can do to stop it from moving my backpack or health bar?

 

Code: [Select]

;==================================================
;Slackers Gating Script.
;Setup: Have a runebook with two runes marked to your vendor house.
;The runes must be in the first two runebok spots.
;Name your runebook Gatebook, otherwise it will ask you to target the book.
;Unlikely, but be sure no other books are named Gatebook.
;==================================================
set %current_rune 1
set %moon OTF_KEF
gosub book_director
;==================================================
main:
gosub open_book
gosub open_gate
gosub gate_check
goto main
;==================================================
sub open_book
finditem %gate_book C_ , #BACKPACKID
Set #LOBJECTID #FINDID
event macro 17 0
wait 10
set %xclick #contposx + 136
set %yclick #contposy + 194
click %xclick %yclick
return
;==================================================
sub open_gate
if %current_rune = 1
{
set %xclick #contposx + 137
set %yclick #contposy + 162
click %xclick %yclick
set %current_rune 2
return
}
set %xclick #contposx + 296
set %yclick #contposy + 162
click %xclick %yclick
set %current_rune 1
return
;==================================================
sub gate_check
wait 3s
finditem %moon G_1
if #FINDCNT < 1
{
return
}
wait 29s
return
;==================================================
sub gate_book
display Please target the gate book.
set #lTargetID X
set #targCurs 1
wait 2
Wait_for_book:
if #lTargetID = X
{
goto Wait_for_book
}
set %gate_book #ltargetid
}
return
;==================================================
sub book_detector
repeat
{
finditem %runebook C_ , #BACKPACKID
event property #findid
if Gatebook in #PROPERTY
{
set %gate_book #FINDID
return
}
ignoreitem #FINDID
}
until #FINDCNT = 0
return
;==================================================
sub book_director
set %runebook ZBN
set %gate_book n/a
gosub book_detector
if %gate_book = n/a
{
gosub gate_book
}
return
;==================================================

Title: Re: Gating Script
Post by: Masscre on July 30, 2014, 04:25:35 PM

Looking at the script a little. It appears to be a timing issue you are running into. You might slow down some of the actions of click here and there and then see if everything works fine after that.