Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - onlyindreams

Pages: 1 2 [3] 4 5 ... 69
32
Stealth scripts / Re: [V6, C#] Egg Farmer - v1.0.0.15 (stable)
« on: June 04, 2015, 03:21:13 PM »
Sibble, I still haven't been able to get your egg farmer to work. On a side note I figure anyone collecting lots of eggs is going to need gorgon lens?.. Does anyone have a good method to collect crystals/dust for making gorgon lens?

Back when I use to farm Medusa a lot, I'd go to the Prism of Light in Nujelm. Costs 10k to get in. Kill the Crystal Daemon and loot the Scattered Crystals they drop. You can use those to make the Crystal Dust.

I recommend a script to loot them as it's impossible to keep up with looting with the spawn rate. I take a sampire and never have any issues.

33
Scripting Chat / Re: The Taming Appraiser Redux
« on: June 03, 2015, 01:20:37 PM »
Quote
gosub TM_DecimalDivision

I feel like I could use something like this in every day life.


If this thread doesn't force Cerveza (I see you lurking there) out of the woodwork, I don't know what will!  :p


34
Scripting Chat / Re: The Taming Appraiser Redux
« on: June 03, 2015, 09:37:00 AM »
A lot of people use the UOCraft.com Calculator. I'm personally not a huge fan of it. Here's a quote from Cerveza's thread that still holds true over 6 years later...

Quote
Yep, Kit's product. About a year ago I showed her how it was messed up, and she still hasn't corrected it. She has %'s and Totals mixed together in her formulas...

Try this... put in one of your pets and gets it's score. Then go back and make it's STRENGTH 1. Yes thats right, one point of strength. Now calc it. LOL if thats not funny enough, make it 999 and do it again.

Quote
Here's an example of her faulty formulas:

My Cu Sidhe, not bad, not the best.

HP 569 , ST 612 , DX 125
65/44/81/50/76

It scores a 4.1 on her scale.

I put in 1 Strength and score a 3.3

I put in 999 Strength and score a 4.5


Quote


35
Scripting Chat / Re: The Taming Appraiser Redux
« on: June 02, 2015, 09:02:16 PM »
Hitpoints, Stamina, Strength and Dexterity all are cut in half upon taming. Mana and Intelligence stay the same.

Skills go down 29-30%. Don't know the exact number. What they can be trained up to is pet specific.

Tested on Greater Dragons, Cu's and Rune Beetles.


edit:
Something to consider; spell casters will cast Bless on themselves. Is it possible for the script to determine this?

36
Scripting Chat / Re: The Taming Appraiser Redux
« on: June 02, 2015, 03:04:39 PM »
For tames, do the hit points exactly 1/2 when you compare a tame critter vs. a wild one?  Also can the same be said for the mana?  Honestly it's been years since I've tamed at any useful level.  It's probably the wrong time for me to tackle a project like this, but it was on my bucket list for scripts.  ;)

Yes, exactly half. I'm not sure about mana. I'll do a little testing later tonight and get back to you.

37
Scripting Chat / Re: The Taming Appraiser Redux
« on: June 01, 2015, 05:02:09 PM »
Crazy timing. I just used Cerv's for the first time in years yesterday! Been looking to upgrade my greater dragon.


How are you gong to read the info.   Sure will be nice if u can just target the pet and get % but not possible with OCR.    

Sure it is; that part is done already!  You just target the critter, the eval gump pops up and about 5 seconds later I scan all the info from all 4 pages.  I have this sub that lets you access all the found information:

Code: [Select]
;---------------------------------------------------------------------
sub TM_GetLoreAttribute
  namespace push
  namespace local tm_pet , %1
  if %2 = HITS
    set #RESULT !hits
  if %2 = HITSMAX
    set #RESULT !hitsmax
  if %2 = STAMINA
    set #RESULT !stamina
  if %2 = STAMINAMAX
    set #RESULT !staminamax
  if %2 = MANA
    set #RESULT !mana
  if %2 = MANAMAX
    set #RESULT !manamax
  if %2 = STRENGTH
    set #RESULT !strength
  if %2 = DEXTERITY
    set #RESULT !dexterity
  if %2 = INTELLIGENCE
    set #RESULT !intelligence
    
  if %2 = RESIST_PHYSICAL
    set #RESULT !physical_resist
  if %2 = RESIST_FIRE
    set #RESULT !fire_resist
  if %2 = RESIST_COLD
    set #RESULT !cold_resist
  if %2 = RESIST_POISON
    set #RESULT !poison_resist
  if %2 = RESIST_ENERGY
    set #RESULT !energy_resist
    
  if %2 = DAMAGE_PHYSICAL
    set #RESULT !physical_damage
  if %2 = DAMAGE_FIRE
    set #RESULT !fire_damage
  if %2 = DAMAGE_COLD
    set #RESULT !cold_damage
  if %2 = DAMAGE_POISON
    set #RESULT !poison_damage
  if %2 = DAMAGE_ENERGY
    set #RESULT !energy_damage
  if %2 = DAMAGE_BASE
    set #RESULT !base_damage
    
  if %2 = SKILL_WRESTLING
    set #RESULT !wrestling
  if %2 = SKILL_TACTICS
    set #RESULT !tactics
  if %2 = SKILL_RESISTING_SPELLS
    set #RESULT !resisting_spells
  if %2 = SKILL_ANATOMY
    set #RESULT !anatomy
  if %2 = SKILL_HEALING
    set #RESULT !healing
  if %2 = SKILL_MAGERY
    set #RESULT !magery
  if %2 = SKILL_EVAL_INT
    set #RESULT !eval_int
  if %2 = SKILL_MEDITATION
    set #RESULT !meditation
  namespace pop
return #RESULT

Probably your question was how I was going to do it WITHOUT OCR.  Well, I am using OCR, just not the one from KalInEx.  I'm using my own that can be included into the script without requiring a separate download.

Just took a quick look. Poisoning is missing from the skill list. Pretty important for Rune Beetles.

38
I had heard of it. But never met anyone with it.

39
UO News / Re: Has anyone seen much of this yet?
« on: May 21, 2015, 12:43:25 PM »

40
Player Templates / Re: Wanting to make new sampire need help please
« on: May 17, 2015, 05:25:32 PM »
How do you get the skill on the talisman? I picked it but its a primer of arms with same mods as tricket with no skill and no undead slayer


Maybe he meant to say the Duelist's Edge or Soldier's Medal?

If you're only going to fight Oaks and Harrowers, I'd go with the Conjurer's Trinket. I'd also go female in case you decide to branch out to Semidar.


41
Hardware Design / Re: Finally got rid of Time Warner!!!!
« on: March 05, 2015, 05:07:45 PM »
$70 for gigabit internet
$120 for internet plus HDTV
or
If you live in an apartment complex and it's installed, you get free internet up to 15mb/s. If you live in a house you pay $300 for installation, then get "free" 15mb/s internet for 10 years.

The only negative with the TV is that they don't have a deal with AMC. So when I watch Walking Dead or something else I have to download it.

42
Hardware Design / Finally got rid of Time Warner!!!!
« on: March 05, 2015, 02:53:02 PM »
Wasn't sure where to put this. But now that I FINALLY have Google Fiber installed, I thought I would share...



It was higher earlier. But I guess this is peak hours  ;)

43
Questing / Re: ScriptUO Heartwood Quester 1.29 with Advanced CLAw support
« on: February 22, 2015, 05:57:37 PM »
***MIGHT OF WRITTEN IN WRONG POST FOR MADE A COPY HERE IF IT WAS THE CORRECT ONE TO POST****

Hello Guys,  Wink   (AT THE DISCRETION OF SITE ADMIN TO BE DELETED/EDITED IF THOUGHT NEEDED, Although please let me know)

I have been looking at this quest now for weeks maybe even a few months. I know I am rather new to the community, And have made my introduction in the desired page and hope some have had a good laugh, But I dont know if I have still qualified to get a reply and help setting this script up properly.
I think I have all the necessary files but I seem to be getting confused on what order I should be running them, if there is an order to run them.....
Most scripts that I have tried have been rather straightforward newbie ones and easy to set up, but this one seems to be a fighter and doesnt want to give in to me. I know a tiny little bit about scripts but this one is just winning me, unless I am doing something absolutely stupid and not noticing it.
I know this is one of the most valued and cared after scripts in all the community, so I am not asking for a full detailed explanation here unless its allowed to by the admins ( Dont want to get anyone in trouble), as I know that this post is valued and not for everyone straight away to see to avoid getting it abused by wrong people, But could someone please I beg Tongue, in your time, please write a ''small up-to-date guide'' or ''guideline protocols'' to follow to make the script work and maybe send me it via Private message or write on forum if deemed correct by the admins.
I don't want to go into full detail about it in case I say something I am not supposed to, but the recall runes 1,2,3 are set up as they should be named, the secure container at the house I am guessing has to have just the fletcher tools/wood inside needed. I do have bonded betle but I am guessing a rail/setup config for it will have to be set up that I havnt got round to it yet. Just want the basics first then we can work on adding more knowledge and more info to make the system run smoother.


These is the list of files I currently: (Please advise if I am missing a file.... just hope not so, tried to thoroughly read all the pages without getting confused)

hw_bowcraft
hw_trinket
sampleclawsetup
SUOHWQuester129
tm_advclawfull780 (I think this is the latest version?)
tool_railengine30k
AND All these files are in the same directory as my EASYUO and OpenEUO executables


Thanks for you time for reading this post message and please keep the great work up.

Just open and run SUOHWQuester129. Keep all the other files as you have them; in same folder as EUO. You can delete the sampleclawsetup if you want. It's just an example that's not required to run the script.

After starting the script, enter the applicable info. After that follow any prompts and then don't touch it after it's going.

44
Combat/Healing/Looting / Re: LAME 3.0 - Le (semi)Automated Mob Eradicator
« on: February 18, 2015, 01:28:29 PM »
Hello
Required some assistance with a small addition.  My guild mate are hunting with Pet, so I add a #FindRep .  Now I no lounger attack guild mate pet, but the attack monster part doesn't work well anymore.  it since to ignore a few.  I can do Riktor ok but Baracoon won't work.   I have try multiple version and this was the best working build. Can you guy have a other idea for me.  Thx

Code: [Select]
set %monster AV_EN_JD_VGB_CB_IS_HS_AB_GJ_CD_DF_AE_AAB_DN_HBB_UAB_TAB_XO_ZO_SO_NO_VC_DB_Q_ED_UM_IAB_CAB_AAB_OI_JZ_XZ_QGB_BD_KQB_CJ_FZ_DN_II_WI_TI_YD_WD_NI_EB_VI_R_XF_VE_IE_OE_HE_LD_BI_RB_UB_GB_LB_FB_CI_QE_AE_DE_FE_AB_QF_XE_YE_X_DI_GJ_W_BE_UC_UD_YH_N_HI_UE_SD_K_J_U_HD_PD_EJ_UI_QO_EAB_TO_PO_XI_UZ_KH_KAB_SZ_FD_MB_AC_IZ_DD_NE_VE_MO_TZ_LD_OE_WH_XI_SH_SC_EF_NB_RC_PB_KHB_UGB_T_CHB_BHB_NE_FD_YO_OTB
set %friend 2 ; What #Findreps to spare.



sub attackMob
set %target %monster
if %honor = #true ; ) && ( %honored = #false ) && ( #finddist <= 8 )
         {
         set %target #findid
         finditem %target G_10
         event macro 49 1 ;Invoke Honor
         target 5s
         set #ltargetid %target
         event macro 22 0 ;Target Demon
         set %honored #true
         }


finditem %target G_1
if #findCnt > 0
{
{
if #findCnt > 1 && ( %useLS = #true ) && ( #mana < 25 ) && ( %spellTimer < #scnt2 )
   gosub execMS
;
if #findCnt < 2 && ( %useLS = #true ) && ( #mana < 25 ) && ( %spellTimer < #scnt2 )
   gosub execLS
;
if ( %useLS = #true ) && ( #mana > 25 ) && ( %spellTimer < #scnt2 )
   gosub execLS
if #findCnt = 2 && ( %useMS = #true ) && ( #mana > 25 ) && ( %spellTimer < #scnt2 )
   gosub execMS
if ( %usePrimary = #true ) &&  ( #mana > 25 ) && ( %spellTimer < #scnt2 )
   gosub execPrim
if ( %useSecondary = #true ) && ( #mana > 25 ) && ( %spellTimer < #scnt2 )
   gosub execSec
Call ScanBuffBar
set %ConWep _ConsecrateWeapon_ in %BuffBarIconNames
if ( %castConWep = #true ) && ( %ConWep = #false ) &&  ( #mana > 10 ) && ( %spellTimer < #scnt2 )
   gosub castCon
set %EOO _EnemyOfOne_ in %BuffBarIconNames
if ( %castEOO = #true ) && ( %EOO = #false ) &&  ( #mana > 10 ) && ( %spellTimer < #scnt2 )
   gosub enemyOfOne
}
if #FindRep notin %friend  ; Only attack if it is not a "bad one".
 {
    if #FINDKIND = -1 4
    finditem %target
    set %attack #findid
    set #LTARGETID %attack
    event macro 27 0

    if #findid <> %attack
    {
    set %attack #findid
    set #LTARGETID %attack
    event macro 27 0
    }
 }
else ; If it a bad one then i ignore it for further run
  {
   ignoreitem #FindRep
  }
  }
return


Once the champ is up, I personally uncheck the attack box. Then I manually select my target and let the script spam AI.

45
UO News / Re: [UO Herald News] Publish 89 for TC1 Today
« on: February 11, 2015, 12:22:28 PM »

Pages: 1 2 [3] 4 5 ... 69