ok i have been meaning to get in here and give some feed back on how i fixed some of the problems i have seen in here. Im no scripter so bear with me, this is hours and hours and hours of messing with this script lol. ok first off i had the same problem with the script scrolling through the quest it runs fine on new comp but old one did not. i am running in 32 bit but for some reason the pixel is not the same color err number i assume its a pixel number. so this is what i did you have to set your pointer over the text a simple bow any part of it will work check and see what number comes up if it is not 8701514 this is likely your problem, mine was 8437839 yours might be diff goto NewSampleArea_skip1
if %6 = 8701514 <=========== change this number here
set !x !x + 2 ; changing this will impact present sampled values!!
else
set !x !x + 5
it is line 1982
you also have to change this herepleArea NULL !clickxposition1 !clickyposition1 !clickxposition2 !clickyposition2 8701514
its line1885 im not sure if it will help any one but it helped me
ok now for the rail i have seen people asking why the rail stops just short of the portal well i asked the same thing so this is what worked for me. the railpoint that goes into the portal must look like this
function = move to portal
index = #
xpos = #
ypos =#
zpos = 0
label = VQV_Portal make sure it does not say VQV_Portal to yew or heartwood this will not work er it will but only one way in or out. you can chnge this by tyeping in your own text and hitting manuel update, just make sure you do it after you walk the rail
delay = 100
that should work for the portal now you have to make sure the next way point looks like this
function = move only
index = #
xpos = 6987
ypos = 342
zpos = 0
label = ?
delay = 0
i just changed the x and y position manualy because you wont be in that spot when you drop into heartwood i hope this helps some of you.
hey TM let me know if anyof this is totaly wacked like i said im no scripter but it worked for me