Hey Scotch,
A couple observations:
Chooseskill has a 4 character parameter, so Spellweaving would be 'spel' - I didn't check if it really works as written.
I can't figure out a reason to lock the detect hidden skill, but it forces it to be locked.
Static wait times following casts regardless of your FCR. This makes it much slower casting that it must be.
The logic surrounding %manacost is not at all obvious:
 before casting save your current mana
 cast
 wait 2 seconds after targetting (can be 0 to 1.5 seconds depending on FCR instead!) so some mana regenerates
 set %manacost to how much was used - modified by how much has regenerated
 if you cast naturesfury (mana cost is 24 unmodified by LMC)
  set %manarequired to %manacost + 84% of %manacost
 if you cast EV (mana cost is 50 unmodified by LMC)
  set %manarequired to %manacost + 48% of %manacost

Those percentages would be different for each setup based on skills, stats and equipped items (meditation, focus, JOAT, intelligence, LMC and MR).
So 84% or 48% ... would change based on another setup to be close to being correct.

A more stable calculation would be to calculate suit LMC and apply it to the base mana cost for casting.

If you would like, I can share the routines I use to calculating suits and mana requirements.

Gaderian

Chooseskill spell works the same as spel, but thanks I corrected it. 

I use the detect hidden skill to setup the location to cast, but I am assuming people don't want to train detect hidden so I just lock it if it's not already.  I tried setting #TARGCURS but I couldn't seem to get it to work on the ground even if I set the #TARGETKIND so I gave up.  Seems to be pretty dependable how I have it targeting. 

The Timers were just simple and don't require much thought.  If you've got subs built and I am smart enough to figure them out I'll add that, but the script was always very simple.  I understand your hatred with dumb timers so I'd give it an honest attempt to remove all those. 

As far as the %Mana Required I'll explain.

set %ManaCost #Mana
 event macro 15 %Cast
 target 4s
 set #LTARGETX %LTX
 set #LTARGETY %LTY
 set #LTARGETZ %LTZ
 set #lTARGETKIND 2
 event macro 22
  wait 2s
 }
 set %ManaCost %ManaCost - #Mana
  if %Cast = 606
    set %manarequired %manacost +  ( %manacost * 84 / 100 )
  if %Cast = 57
    set %manarequired %manacost +  ( %manacost * 48 / 100 )
This is only in the initial cast, so all it's doing is if you're casting EV it figures out how much that cost you then adds the cost to cast invisibility after cast.  Invisibility is a percentage of either spell, so if the initial cast is EV it calculates that plus a invis as the minimum mana the script will need if you are casting summons over and over. same with Natures Fury.

Not saying it's super accurate, but I thought this would be the easiest way to do it considering it's taking the mana cost directly from you casting the spell.  Even if it's got some crap timer code from my tests it seems to get close using different characters with different suits (one really good suit and one really crappy suit)  any slop only helps with adding buffer on for having to cast a heal or cure in there.

Hello ScriptUO.  I'm here to introduce myself and become a part of the community.  Like a lot of you here probably, I'm a game nerd.  I spend most of my time drinking coffee and playing this outdated game or posting about this outdated game.  I play on Alexandria, EasyUO's free shard, and a little on RWR Freeshard.  A current member over here (CStalker) was tired of listening to me talk so he told me I should go read this site because I'm annoying and he really needed a break.  I decided it was a very interesting site and I'm interested in what I've read so far.  (Interface looks pretty interesting)
I tinker around with scripts and enjoy watching them do my bidding.  I script and have a basic understanding of the language. 

I work offshore as a Electronics Technician (ROV Tec).  I've been doing it for about 6 months now.  I really enjoy my job.  Other than UO I also enjoy sailing.  I lived on a sailboat up until recently, it was lost during Hurricane Ike.  I hope to be welcomed into the community.  If CStalker says anything about me don't listen to him he's full of crap. (unless it's good, then everything he says is true)

Talk to you guys soon!

Scotch_Tape

My employment changed.  Also I haven't talked to CStalker in like 10 years but still don't listen to him unless what he says about me is positive.  RWR doesn't exist anymore.  Started playing again on Alexandria so that's still the same.  I am just one of those old guys who can't leave this stupid video game it seems.  Did pretty good this last hiatus went like 10 years.  Very impressed with the amount of activity of you old timers.  You guys are more hopeless than I am and I can respect that.   

pretty cool.  I've been watching YouTube Tutorials for a while and moving through these I'm picking up a lot of new things.

Thanks for the link.

I had an officer in the line company (USMC) I was in that carried around and quoted your normal "war movies" like Full Metal Jacket, Apocalypse Now, ect.  Guy was a total tool, but at least we had something to joke about while field daying rooms for hours on end or doing some retarded field exercise that although might be remotely possible to happen, you wouldn't confront the enemy like that.  One time one of the *bleep* bag marines lost a laptop and had ran to the officer saying someone had stole it.  He called a formation in the middle of a saturday and started his whole spill with a quote from The tears of the sun.  Pretty gay. 

Good jokes, I got a laugh out of it.

I've found myself doing a lot of projects around the house and was wondering if anyone knew of a free(or cheaper than actual autocad)  autocad type program.  I want something that works better than MS Paint.  Even just a computer generated graph paper would be better than the way I'm doing it now.


Some projects that I'd like to use this type of program on...

-Electrical wiring and framing blueprint of house.
-Small waterproof box to add to motorcycle for various electronic additions
-landscape projects (birds eye view with measurements between trees/house/sidewalks/ect.

Those are just a few.  I'd rather not go spend $400 on something the professionals are using if I can find something free to screw around with.  I have little AutoCad experience but could probably find my way around with watching enough youtube video walk throughs and a little time. 

Thanks!
Scotch

Big fan BM.  I don't know you personally, but I've used your scripts a long time and will be looking forward to reading your posts and all that.  I thought you might have gone to that big place in the sky where everyone eventually goes when they lose interest in the 13 year old internet video game. 

<o> = text | number (see info about "problem with O")

Here is what that is all about...

problem with 'O': this OCR script "reads" characters displayed using a very specific and very common UO font by recognizing the shape of each character. the problem with 'O' is that both 'O' and ZERO have the same shape and as such it is impossible for this script to tell them apart. you can specify "text" or "number" to control how 'O' is returned by some of the routines (useful if you know your scanning text without numbers or text with only numbers).

if you want it to read numbers set it to zero, if just letters set it to o.

I'm interested in the AutoIT script.  I downloaded it about a week ago and trying to figure it out.