XIIxOveR's Miner For Dummies 3.0

[bodfather]

Ok here's what i did: I reset my dig spots again with euo open and tile info showing so i could closely see the tile ids as the script found them and mined.

Here's what i got off my personal runes.
6039,6040,6041,6042,6043,6044

They show as water while it's digging but i get sand from them.

I added them but they still didn't save. Maybe i need to reset dig spots with new tiles added?

I'm really not worried with bothing you about this because the chance of anyone else using runes like mine is prolly 1 in 500. I'm just out to strip mine every single resource i can from my runes.

Where would i add this in at? No i don't think i can do the registry yet.
set %variable X_Y_Z ;where XYZ = your dig spot coordinates
if %variable IN *12TimesMiningYesMine
   Display Coordinates found in YesMine!
if %variable IN *12TimesMiningNoMine
   Display Coordinates found in NoMine!
Halt

[12TimesOver]

Ok here's what i did: I reset my dig spots again with euo open and tile info showing so i could closely see the tile ids as the script found them and mined.

Here's what i got off my personal runes.
6039,6040,6041,6042,6043,6044

They show as water while it's digging but i get sand from them.

I added them but they still didn't save. Maybe i need to reset dig spots with new tiles added?

Instead of looking at the tile id's and name can you then look at the #ltargetx, #ltargety, and #ltargetz system variables? You will see the X/Y/Z values of the tile it is mining. These values should match something in one of the variables I mention below.

I'm not using the tile id values at the moment so those big lists of numbers at the top of the script aren't doing anything for us for now.

I'm really not worried with bothing you about this because the chance of anyone else using runes like mine is prolly 1 in 500. I'm just out to strip mine every single resource i can from my runes.

No bother, this is something that could indeed impact just about anyone, unless I figure out that it's something unique to bodfather I view it as an issue with the logic in the scirpt.

Where would i add this in at? No i don't think i can do the registry yet.

Code: [Select]

set %variable X_Y_Z ;where XYZ = your dig spot coordinates
if %variable IN *12TimesMiningYesMine
   Display Coordinates found in YesMine!
if %variable IN *12TimesMiningNoMine
   Display Coordinates found in NoMine!
Halt

This you would copy and paste into a new EUO window as a script all in it's own but you first need to get the X/Y/Z coordinates to check.

[gimlet]

High Quality Granite BVI
FINDCOL

granite 0
DC 2419
Shad 2406
copper 2413
Gold 2213
Bronze 2418
agapite 2425
verite 2207
Val 2219

[bodfather]

  Well i've done all i can do. Retried setup, got all the ltarget xyz's and added them into the yesmine. What i didn't do was add them in order (don't know if that matters?) and still bypasses those spots after the initial setup.

What i did notice was, there are no xyz's in the nomine. It's completely blank when i click it to see what's there.

I'm completely stumped.

[12TimesOver]

High Quality Granite BVI
FINDCOL

granite 0
DC 2419
Shad 2406
copper 2413
Gold 2213
Bronze 2418
agapite 2425
verite 2207
Val 2219

Damn, that's what I have already. Guess I'll have to start mining again so I can get some inventory to start testing again.

As for your issue bodfather, I'm going to have to try to test it myself. Can you give me the location including XY coordinate of where you are recalling into? Feel free to PM me if you'd like to keep it quiet, I'd like to try to reproduce your issue.

X

<edit> Ok, found the Stone count problem - stupid typo. Haven't up'd new version yet, gonna wait for some more updates.

X

[12TimesOver]

 Well i've done all i can do. Retried setup, got all the ltarget xyz's and added them into the yesmine. What i didn't do was add them in order (don't know if that matters?) and still bypasses those spots after the initial setup.

What i did notice was, there are no xyz's in the nomine. It's completely blank when i click it to see what's there.

I'm completely stumped.

Ok Bodfather, I have reproduced your issue at the coordinates you provided me via PM. I see that all spots are being tracked as good or bad correctly but then the next time I visit it's hitting only a single spot then moving on.

I'm going to test again at a different spot because this explains some other issues I've seen. Thanks for your info, more will surely be coming soon.

X

[gimlet]

Thanks!

[12TimesOver]

Woohoo! Found the issue. The tile loop isn't cycling through the tile layers correctly. It's basically trying only the first layer of the tile then moving on to the next tile. This would be an issue anywhere there is layer issues, hopefully this will make the script work a lot better everywhere!

X

[12TimesOver]

Updated to 3.06

Fixed both stone counting issue, the skipping dig spots issue, and some other misc stuff.

X

[bodfather]

  Works perfect now. Seems like it's faster as well.

Only 2 issues i can see. None are game changing and one can be tweaked by user.

-when pack gets full it'll recall home and drop wait time is a little fast.
-when it recalls back to the spot it'll try all saved runes again at that spot. (which could actually be good)

Other than that it's PERFECT this time for me. You know my spots too, i get the most out of em.

*Edit* for those of you that changed the charpos x,y and a,b you'll have to change those again. 

[gimlet]

After I make my mods - i will check latter tonight

[gimlet]

Found one more error


else
            gosub XIIxMoveStuff #findid SecureID 1 #backpackid


should it be

else
            gosub XIIxMoveStuff #findid %SecureID 1 #backpackid

[12TimesOver]

LOL yup, good catch. Updating now. That's what happens when I do things in a hurry hehe.

X

[Masscre]

Just dropped in to say thanks for fixing the ter mur mining area. It works again. I have not been able to ming in ter mur in close to a year Very nice work 12x^.

[12TimesOver]

Updated to fix typo Gimlet caught above.

X